The cleanup sequence was incorrect and could cause a kernel oops.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When device nodes are registered they must be ready for use
immediately, so make sure the subdevs are loaded first.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When device nodes are registered they must be ready for use
immediately, so make sure the subdevs are loaded first.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Routing information is a property of the input, not of the subdev.
One subdev may provide multiple inputs, each with its own routing
information.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Calling a subdev op that isn't implemented will just return -ENOIOCTLCMD
No need to have a flag for that.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The output index does not belong to video_obj, it belongs to
channel_obj. Also rename to output_idx to be consistent with
the input_idx name used in vpif_capture.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

input_idx does not belong to video_obj. Move it where it belongs.
Also remove the bogus code in the open() function that suddenly
changes the input to 0 for no reason.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Include the expander settings to select VPIF peripheral on
UI card and add registration call in EVM init. Also add platform
data to configure display and capture devices.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add clock, pin mux definitions and registration function for
VPIF capture and display driver on DA850/OMAP-L138 SoC.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

for da850/omap-l138, there is no need to setup_input_channel_mode()
and set_clock(), to avoid adding dummy code in board file just returning
zero add a check in the driver itself to call the handler only if its
not NULL.
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/platform/fsl-viu.c: In function 'vidioc_s_fbuf':
drivers/media/platform/fsl-viu.c:867:32: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
This is fall-out from this commit:
commit e6eb28c2
Author: Hans Verkuil <hans.verkuil@cisco.com>
    [media] v4l2: make vidioc_s_fbuf const
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

V4L2_CID_TEST_PATTERN is now a standard control.
This patch replaces the user defined control for test
pattern to make use of standard control V4L2_CID_TEST_PATTERN.
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add helper function v4l2_ctrl_new_std_menu_items(), which adds
a standard menu control, with driver specific menu.
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

add V4L2_CID_TEST_PATTERN of type menu, which determines
the internal test pattern selected by the device.
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Acked-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

.get_frame_desc can be used by host interface driver to query
properties of captured frames, e.g. required memory buffer size.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The V4L2_PIX_FMT_S5C_YUYV_JPG image formats consists of 2 planes, the
first containing interleaved JPEG/YUYV data and the second containing
meta data describing the interleaving method.
The image data is transferred with MIPI-CSI "User Defined Byte-Based
Data 1" type and is captured to memory by FIMC DMA engine.
The meta data is transferred using MIPI-CSI2 "Embedded 8-bit non Image
Data" and it is captured in the MIPI-CSI slave device and copied to
the bridge provided buffer.
To make sure the size of allocated buffers is correct for the subdevs
configuration when VIDIOC_STREAMON ioctl is invoked, an additional
check is added at the video pipeline validation function.
Flag FMT_FLAGS_COMPRESSED indicates the buffer size must be retrieved
from a sensor subdev.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

MIPI-CSI has internal memory mapped buffers for the frame embedded
(non-image) data. There are two buffers, for even and odd frames which
need to be saved after an interrupt is raised. The packet data buffers
size is 4 KiB and there is no status register in the hardware where the
actual non-image data size can be read from. Hence the driver copies
whole packet data buffer into a buffer provided by the FIMC driver.
This will form a separate plane in the user buffer.
When FIMC DMA engine is stopped by the driver due the to user space
not keeping up with buffer de-queuing the MIPI-CSIS will still run,
however it must discard data which is not captured by FIMC. Which
frames are actually capture by MIPI-CSIS is determined by means of
the s_tx_buffer subdev callback. When it is not called after a single
embedded data frame has been captured and copied and before next
embedded data frame interrupt occurrs, subsequent embedded data frames
will be dropped.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds definition of the Samsung S5C73M3 camera specific
image format. V4L2_PIX_FMT_S5C_UYVY_JPG is a two-planar format,
the  first plane contains interleaved UYVY and JPEG data followed
by meta-data. The second plane contains additional meta-data needed
for extracting JPEG and UYVY data stream from the first plane.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds media bus pixel code for the interleaved JPEG/UYVY
image format used by S5C73MX Samsung cameras. This interleaved image
data is transferred on MIPI-CSI2 bus as User Defined Byte-based Data.
It also defines an experimental vendor and device specific media bus
formats section and adds related DocBook documentation.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add subdev callbacks for setting up parameters of the frame on media bus
that are not exposed to user space directly. This is just an initial,
mostly stub implementation. struct v4l2_mbus_frame_desc is intended
to be extended with sub-structures specific to a particular hardware media
bus. For now these new callbacks are used only to query or specify maximum
size of a compressed or hybrid (container) media bus frame in octets.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The s_rx_buffer callback allows the host to set buffer for a data being
received by the subdev, e.g. non-image frame (meta) data. This callback
can be implemented by subdevice like a MIPI CSI2 receiver, allowing the
host driver to gather additional data into frame buffer passed to user
space.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/platform/s5p-fimc/fimc-m2m.c:561:2: warning: passing argument 2 of 'fimc_m2m_try_crop' discards 'const' qualifier from pointer target type [enabled by default]
drivers/media/platform/s5p-fimc/fimc-m2m.c:502:12: note: expected 'struct v4l2_crop *' but argument is of type 'const struct v4l2_crop *'
This is fall-out from this commit:
commit 4f996594
Author: Hans Verkuil <hans.verkuil@cisco.com>
    [media] v4l2: make vidioc_s_crop const
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/platform/s5p-g2d/g2d.c:535:2: warning: passing argument 3 of 'vidioc_try_crop' discards 'const' qualifier from pointer target type [enabled by default]
drivers/media/platform/s5p-g2d/g2d.c:510:12: note: expected 'struct v4l2_crop *' but argument is of type 'const struct v4l2_crop *'
This is fall-out from this commit:
commit 4f996594
Author: Hans Verkuil <hans.verkuil@cisco.com>
    [media] v4l2: make vidioc_s_crop const
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare
calls as required by common clock framework.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds a module-device-table-entry to the
technisat-usb2-driver which will help udev to on-demand load the
driver. This was obviously forgotten during initial commit.
Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch replaces V4L2_OUT_CAP_CUSTOM_TIMINGS macro with
V4L2_OUT_CAP_DV_TIMINGS. As V4L2_OUT_CAP_CUSTOM_TIMINGS is being phased
out.
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

recent patch with commit id 4f996594
which makes vidioc_s_crop const, was causing a following build warning,
vpbe_display.c: In function 'vpbe_display_s_crop':
vpbe_display.c:640: warning: initialization discards qualifiers from pointer target type
This patch fixes the above build warning.
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

add filter settings for high def modes like 1080i,
1080p,720p and others and implementing dv_timings.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch replaces the preset API by the timings API, and
appropriate changes in board file.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As spotted by Dan Carpenter <dan.carpenter@oracle.com> (thanks!), we have
improperly used an unsigned variable in a calculation that may result in a
negative number. This may cause an unintended underflow if the interface
frequency of the tuner is > approx. 40MHz.
This patch should resolve the issue, following an approach similar to what is
used in af9013.c.

[crope@iki.fi: add Reported-by]
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NHans-Frieder Vogt <hfvogt@gmx.net>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

recent patch with commit id 4f996594
which makes vidioc_s_crop const, was causing a following build error.
vpfe_capture.c: In function 'vpfe_s_crop':
vpfe_capture.c:1695: error: assignment of read-only location '*crop'
vpfe_capture.c:1706: warning: passing argument 1 of
'ccdc_dev->hw_ops.set_image_window' discards qualifiers from pointer target type
vpfe_capture.c:1706: note: expected 'struct v4l2_rect *' but argument is of
type 'const struct v4l2_rect *'
make[4]: *** [drivers/media/platform/davinci/vpfe_capture.o] Error 1
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As em28xx-dvb will always be initialized asynchronously, there's
no need anymore for a separate thread to load the DRX-K firmware.

Fixes a known regression with kernel 3.6 with tda18271 driver
and asynchronous DRX-K firmware load.

Antti tested it with the following hardware:
        Hauppauge WinTV HVR 930C
        MaxMedia UB425-TC
        PCTV QuatroStick nano (520e)
Tested-by: NAntti Palosaari <crope@iki.fi>
Cc: stable@kernel.org #	for Kernel 3.6 - please note that driver location has changed
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Due to udev-182, the firmware load was changed to be async, as
otherwise udev would give up of loading a firmware.

Add an option to return to the previous behaviour, async firmware
loads cause failures with the tda18271 driver.

Antti tested it with the following hardware:
        Hauppauge WinTV HVR 930C
        MaxMedia UB425-TC
        PCTV QuatroStick nano (520e)
Tested-by: NAntti Palosaari <crope@iki.fi>
Cc: stable@kernel.org #	for Kernel 3.6 - please note that driver location has changed
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

em28xx-dvb, em28xx-alsa and em28xx-ir are typically initialized
asyncrhronously. The exception for it is when those modules
are loaded before em28xx (or before an em28xx card insertion) or
when they're built in.

Make the extentions to always load asynchronously. That allows
having all DVB firmwares loaded synchronously with udev-182.

Antti tested it with the following hardware:
	Hauppauge WinTV HVR 930C
	MaxMedia UB425-TC
	PCTV QuatroStick nano (520e)
Tested-by: NAntti Palosaari <crope@iki.fi>
Cc: stable@kernel.org # for Kernel 3.6 - please note that driver location has changed
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Until now, if there is a read error in tda18271_get_id, the driver
reports "Unknown device..."  Instead, check the return value of
tda18271_read_regs and display the appropriate error message.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

if the configuration option 'delay_cal' is set, delay both IR & RF
calibration until init() is called.
both module option 'cal' or configuration option 'rf_cal_on_startup'
will override this delay. it makes no sense to mix 'delay_cal' with
'rf_cal_on_startup' as these options conflict with each other.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>