Signed-off-by: NYinghai <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

some functions need to be moved to setup_numa.c
after we merge setup32/64.c, some funcs need to be moved back to setup.c
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

if acpi=off, acpi=noirq and pci=noacpi, we need to disable apic.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch moves the reserve_crashkernel() to setup.c and removes the
architecture-specific version. Both versions were more or less the same.

I tested it on both x86-64 and i386, with CONFIG_KEXEC on and off (so
that it compiles).
Signed-off-by: NBernhard Walle <bwalle@suse.de>
Cc: yhlu.kernel@gmail.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix setup.c printk format warning:

linux-next-20080605/arch/x86/kernel/setup.c: In function 'setup_per_cpu_areas':
linux-next-20080605/arch/x86/kernel/setup.c:173: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ssize_t'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

  * Remove the boot_cpu_pda array and pointer table from the data section.
    Allocate the pointer table and array during init.  do_boot_cpu()
    will reallocate the pda in node local memory and if the cpu is being
    brought up before the bootmem array is released (after_bootmem = 0),
    then it will free the initial pda.  This will happen for all cpus
    present at system startup.

    This removes 512k + 32k bytes from the data section.

For inclusion into sched-devel/latest tree.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    +   sched-devel/latest  .../mingo/linux-2.6-sched-devel.git
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

  * Consolidate node_to_cpumask operations and remove the 256k
    byte node_to_cpumask_map.  This is done by allocating the
    node_to_cpumask_map array after the number of possible nodes
    (nr_node_ids) is known.

  * Debug printouts when CONFIG_DEBUG_PER_CPU_MAPS is active have
    been increased.  It now shows faults when calling node_to_cpumask()
    and node_to_cpumask_ptr().

For inclusion into sched-devel/latest tree.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    +   sched-devel/latest  .../mingo/linux-2.6-sched-devel.git
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

  * Restore the nodenumber field in the x86_64 pda.  This field is slightly
    different than the x86_cpu_to_node_map mainly because it's a static
    indication of which node the cpu is on while the cpu to node map is a
    dyanamic mapping that may get reset if the cpu goes offline.  This also
    simplifies the numa_node_id() macro.

For inclusion into sched-devel/latest tree.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    +   sched-devel/latest  .../mingo/linux-2.6-sched-devel.git
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

  * Introduce a new PER_CPU macro called "EARLY_PER_CPU".  This is
    used by some per_cpu variables that are initialized and accessed
    before there are per_cpu areas allocated.

    ["Early" in respect to per_cpu variables is "earlier than the per_cpu
    areas have been setup".]

    This patchset adds these new macros:

	DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)
	EXPORT_EARLY_PER_CPU_SYMBOL(_name)
	DECLARE_EARLY_PER_CPU(_type, _name)

	early_per_cpu_ptr(_name)
	early_per_cpu_map(_name, _idx)
	early_per_cpu(_name, _cpu)

    The DEFINE macro defines the per_cpu variable as well as the early
    map and pointer.  It also initializes the per_cpu variable and map
    elements to "_initvalue".  The early_* macros provide access to
    the initial map (usually setup during system init) and the early
    pointer.  This pointer is initialized to point to the early map
    but is then NULL'ed when the actual per_cpu areas are setup.  After
    that the per_cpu variable is the correct access to the variable.

    The early_per_cpu() macro is not very efficient but does show how to
    access the variable if you have a function that can be called both
    "early" and "late".  It tests the early ptr to be NULL, and if not
    then it's still valid.  Otherwise, the per_cpu variable is used
    instead:

	#define early_per_cpu(_name, _cpu) 			\
		(early_per_cpu_ptr(_name) ?			\
			early_per_cpu_ptr(_name)[_cpu] :	\
			per_cpu(_name, _cpu))

    A better method is to actually check the pointer manually.  In the
    case below, numa_set_node can be called both "early" and "late":

	void __cpuinit numa_set_node(int cpu, int node)
	{
	    int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);

	    if (cpu_to_node_map)
		    cpu_to_node_map[cpu] = node;
	    else
		    per_cpu(x86_cpu_to_node_map, cpu) = node;
	}

  * Add a flag "arch_provides_topology_pointers" that indicates pointers
    to topology cpumask_t maps are available.  Otherwise, use the function
    returning the cpumask_t value.  This is useful if cpumask_t set size
    is very large to avoid copying data on to/off of the stack.

  * The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while
    the non-debug case has been optimized a bit.

  * Remove an unreferenced compiler warning in drivers/base/topology.c

  * Clean up #ifdef in setup.c

For inclusion into sched-devel/latest tree.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    +   sched-devel/latest  .../mingo/linux-2.6-sched-devel.git
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Because of the size limits of struct boot_params (zero page), the
maximum number of E820 memory map entries can be passed to kernel is
128. As pointed by Paul Jackson, there is some machine produced by SGI
with so many nodes that the number of E820 memory map entries is more
than 128. To enabling Linux kernel on these system, a new setup data
type named SETUP_E820_EXT is defined to pass additional memory map
entries to Linux kernel.

This patch is based on x86/auto-latest branch of git-x86 tree and has
been tested on x86_64 and i386 platform.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

"Form follows function". Code is now where it belongs to.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Also much less code now.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

a multi-socket test-system with 3 or 4 ioapics, when 4 dualcore cpus or
2 quadcore cpus installed, needs to switch to bigsmp or physflat.

CPU apic id is [4,11] instead of [0,7], and we need to check max apic
id instead of cpu numbers.

also add check for 32 bit when acpi is not compiled in or acpi=off.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds linked list of struct setup_data supported for i386.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: andi@firstfloor.org
Cc: mingo@redhat.com
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch implements PCI extended configuration space access for
AMD's Barcelona CPUs. It extends the method using CF8/CFC IO
addresses. An x86 capability bit has been introduced that is set for
CPUs supporting PCI extended config space accesses.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The phys_cpu_present_map is an expected symbol in the SMP harness.
Unfortunately, x86 recently moved this and a few others to
kernel/setup.c where it doesn't quite work because voyager has to
define its own.  Use CONFIG_X86_LOCAL_APIC to isolate these
definitions and fix up another area in setup.c where CONFIG_X86_SMP
should be used instead of CONFIG_SMP.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: toralf.foerster@gmx.de
Cc: Mike Travis <travis@sgi.com>
Cc: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

commit 62179849
    x86: fix setup printk format warning

is for linux-next and not for .26
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Fix x86 setup printk format warming:

next-20080430/arch/x86/kernel/setup.c:172: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ssize_t'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: mingo@elte.hu
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

  * Here is a simple patch to use an allocated array of cpumasks to
    represent cpumask_of_cpu() instead of constructing one on the stack.
    It's based on the Kconfig option "HAVE_CPUMASK_OF_CPU_MAP" which is
    currently only set for x86_64 SMP.  Otherwise the the existing
    cpumask_of_cpu() is used but has been changed to produce an lvalue
    so a pointer to it can be used.

Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Cleanup references to the early cpu maps for the non-SMP configuration
and remove some functions called for SMP configurations only.

Cc: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We use the same routing as x86_64, moved now to setup.c.
Just with a few ifdefs inside.
Note that this routing uses prefill_possible_map().
It has the very nice side effect of allowing hotplugging of
cpus that are marked as present but disabled by acpi bios.
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>