If the code were already aligned to 64 bytes, wr instruction would be executed
twice --- once in delay slot and once in the jump target.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As noticed by Mikulas Patocka, the backoff macros don't
completely nop out for UP builds, we still get a
branch always and a delay slot nop.

Fix this by making the branch to the backoff spin loop
selective, then we can nop out the spin loop completely.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simple microoptimizations for sparc64 atomic functions:
Save one instruction by using a delay slot.
Use %g1 instead of %g7, because %g1 is written earlier.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Basically tip-off the powerpc code, use a 64-bit type and atomic64_t
interfaces for the implementation.

This gets us off of the by-hand asm code I wrote, which frankly I
think probably ruins I-cache hit rates.

The idea was the keep the call chains less deep, but anything taking
the rw-semaphores probably is also calling other stuff and therefore
already has allocated a stack-frame.  So no real stack frame savings
ever.

Ben H. has posted patches to make powerpc use 64-bit too and with some
abstractions we can probably use a shared header file somewhere.

With suggestions from Sam Ravnborg.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Linus noticed that some of the interface arguments
didn't get "int" --> "long" conversion, as needed.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Should return 'long' instead of 'int'.

Thanks to Dimitris Michailidis and Tony Luck.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As noticed by Linus, it is critical that some of the
rwsem constants be signed.  Yet, hex constants are
unsigned unless explicitly casted or negated.

The most critical one is RWSEM_WAITING_BIAS.

This bug was exacerbated by commit
424acaae ("rwsem: wake queued readers
when writer blocks on active read lock")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The only tricky bit is the compat version of fanotify_mark, which
which on 32-bit the 64-bit mark argument is passed in as "high32",
"low32".
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a video head and keyboard are hooked up, specifying "console=ttyS0"
or similar to use a serial console will not work properly.

The key issue is that we must register all serial console capable
devices with register_console(), otherwise the command line specified
device won't be found.  The sun serial drivers would only register
themselves as console devices if the OpenFirmware specified console
device node matched.  To fix this part we now unconditionally get
the serial console register by setting serial_drv->cons always.

Secondarily we must not add_preferred_console() using the firmware
provided console setting if the user gaven an override on the kernel
command line using "console="  The "primary framebuffer" matching
logic was always triggering o n openfirmware device node match, make
it not when a command line override was given.
Reported-by: NFrans Pop <elendil@planet.nl>
Tested-by: NFrans Pop <elendil@planet.nl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With this change, the arch/tile Makefile will only check for a valid
combination of CROSS_COMPILE vs "uname -m" for a few common targets
that are typically the ones we get wrong (vmlinux, all, and modules).
The change handles the case of an empty "make" goal like "make all".
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>

This fixes a failure in "make headers_check" for tile.
I hadn't realized this file was exported to userspace by default.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

See commit a6eb9fe1.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>

Use the defconfig files generated by "make savedefconfig" for
remaining defconfig files.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

unifdef-y and header-y have same semantic, so drop unifdef-y
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This PL008 among all other variables named PL080 doesn't seem
right. Fix it. Also add some missing defined that I use in the
new PL08x driver.
Acked-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This patch fixes on following build warning.

warning: (PLAT_S5P && (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 ||
	     ARCH_S5PV210 || ARCH_S5PV310) || ARCH_S3C64XX && <choice>)
	     selects PLAT_SAMSUNG which has unmet direct dependencies
	     (ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX)
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

For situations where double buffering is needed (such as the
current Android) make the screen virtual y size twice the
LCD size so that there is space for a second screen that
can be switched to.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Change the area available for consitent DMA allocations from the
default to 8MiB to allow drivers such as the framebuffer to get
more memory (for situations where larger virtual screen resolutions
are needed).
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This adds the I²C board information for the WM8987 used in the SmartQ as audio
codec and adds the I²C/I²S platform drivers.
Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The following change makes the framebuffer work on SmartQ5. There are
still some problems with ADC, so this patch alone won't make the device
run (or even give a working fb), but it's one issue less to think about.
Signed-off-by: NPatrick Georgi <patrick@georgi-clan.de>
Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This patch changes the platform data definitions of the wifi and iNAND chip on
the SmartQ 5 and 7 to indicate that they don't have a CD line available and are
thus hard-wired to the SDHCI data lines.
Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This shares the common LCD control platform definition used in the SmartQ 5 and
7. This also corrects it as a GPIO bitbanged SPI device instead of an I²C one,
which was wrong.
Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Register SHDCI devices
Signed-off-by: NDarius Augulis <augulis.darius@gmail.com>
[ben-linux@fluff.org: rewrite header[
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This patch is based on "[PATCH v2] Support for Real6410"
Signed-off-by: NDarius Augulis <augulis.darius@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add support for CoreWind Real6410 board, based on Samsung s3c6410 processor.
Signed-off-by: NDarius Augulis <augulis.darius@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Three new syscalls for 2.6.36: prlimit64, fanotify_init and
fanotify_mark.  Wire up the ia64 syscall table for them.
Signed-off-by: NTony Luck <tony.luck@intel.com>

See commit 1527bc8b.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Mark arguments to certain system calls as being const where they should be but
aren't.  The list includes:

 (*) The filename arguments of various stat syscalls, execve(), various utimes
     syscalls and some mount syscalls.

 (*) The filename arguments of some syscall helpers relating to the above.

 (*) The buffer argument of various write syscalls.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These have been broken (returning "int") since the dawn of
time. But there were no users that needed the whole value
until commit
 424acaae
 rwsem: wake queued readers when writer blocks on active read lock

made this change:

-           (rwsem_atomic_update(0, sem) & RWSEM_ACTIVE_MASK))
-               /* Someone grabbed the sem already */
+           rwsem_atomic_update(0, sem) < RWSEM_WAITING_BIAS)
+               /* Someone grabbed the sem for write already */

RWSEM_ACTIVE_MASK is 0xffffffffL, so the old code only looked
at the low order 32-bits. The new code needs to see all 64 bits.
Signed-off-by: NTony Luck <tony.luck@intel.com>

Until now, the tile architecture ABI for syscall return has just been
that r0 holds the return value, and an error is only signalled like it is
for kernel code, with a negative small number.

However, this means that in multiple places in userspace we end up writing
the same three-cycle idiom that tests for a small negative number for
error.  It seems cleaner to instead move that code into the kernel, and
set r1 to hold zero on success or errno on failure; previously, r1 was
just zeroed on return from the kernel (to avoid leaking kernel state).
This way a single conditional branch after the syscall is sufficient
to test for the failure case.  The number of cycles taken is the same,
but the error-checking code is in just one place, so total code size is
smaller, and random userspace syscall code is easier to understand.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

It's wrong for several reasons, but the most direct one is that the
fault may be for the stack accesses to set up a previous SIGBUS.  When
we have a kernel exception, the kernel exception handler does all the
fixups, not some user-level signal handler.

Even apart from the nested SIGBUS issue, it's also wrong to give out
kernel fault addresses in the signal handler info block, or to send a
SIGBUS when a system call already returns EFAULT.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

acpi_perf_data is a percpu pointer but was missing __percpu markup.
Add it.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDave Jones <davej@redhat.com>

This change rolls up random cleanups not representing any actual bugs.

- Remove a stale CONFIG_ value from the default tile_defconfig
- Remove unused tns_atomic_xxx() family of methods from <asm/atomic.h>
- Optimize get_order() using Tile's "clz" instruction
- Fix a bad hypervisor upcall name (not currently used in Linux anyway)
- Use __copy_in_user_inatomic() name for consistency, and export it
- Export some additional hypervisor driver I/O upcalls and some homecache calls
- Remove the obfuscating MEMCPY_TEST_WH64 support code
- Other stray comment cleanups, #if 0 removal, etc.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

This functionality was stubbed out until recently.  Now we support our
normal backtracing API on TILE-Gx as well as on TILE64/TILEPro.
This change includes a tweak to the instruction encoding caused by
adding addxli for compat mode.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

First, the siginfo preamble wasn't quite right; we need to indicate
that we are padding up to 4 ints of preamble for 64-bit code, and
then for compat mode we need to pad differently, using only 3 ints.

Second, the C ABI requires a save area of two registers, not two
pointers, since in compat mode we have 64-bit registers all of which
we need to save, even though we only have 32-bit VAs.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

We were using the same 5-sec minsec for the clocksource and sched_clock
that we were using for the clock_event_device.  For the clock_event_device
that's exactly right since it has a short maximum countdown time.
But for sched_clock we want to avoid wraparound when converting from
ticks to nsec over a much longer window, so we force a shift of 10.
And for clocksource it seems dodgy to use a 5-sec minsec as well, so we
copy some other platforms and force a shift of 22.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Fix this warning:

arch/s390/appldata/appldata_net_sum.c: In function 'appldata_get_net_sum_data':
arch/s390/appldata/appldata_net_sum.c:89: warning: initialization from incompatible pointer type

which was introduced with be1f3c2c
"net: Enable 64-bit net device statistics on 32-bit architectures"
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>