- 28 10月, 2010 15 次提交
-
-
由 Sony Chacko 提交于
4095 vlan id is reserved and should not be use. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
If eswitch is enabled, rcv ring size can be reduce, as physical port is partition-ed. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 amit salecha 提交于
In failover bonding case, same mac address can be programmed on other slave function. Fw will delete old entry (original func) associated with that mac address. Need to reporgram mac address, if failover again happen to original function. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
ehea_start_xmit() dereferences skb after its freeing in ehea_xmit3() to get vlan tags. Move the offending block before the potential ehea_xmit3() call. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Adds __rcu annotations to inetpeer (struct inet_peer)->avl_left (struct inet_peer)->avl_right This is a tedious cleanup, but removes one smp_wmb() from link_to_pool() since we now use more self documenting rcu_assign_pointer(). Note the use of RCU_INIT_POINTER() instead of rcu_assign_pointer() in all cases we dont need a memory barrier. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Adds __rcu annotation to (struct fib_rule)->ctarget Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Add __rcu annotations to : (struct ip_tunnel)->prl (struct ip_tunnel_prl_entry)->next (struct xfrm_tunnel)->next struct xfrm_tunnel *tunnel4_handlers struct xfrm_tunnel *tunnel64_handlers And use appropriate rcu primitives to reduce sparse warnings if CONFIG_SPARSE_RCU_POINTER=y Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Add __rcu annotations to : struct net_protocol *inet_protos struct net_protocol *inet6_protos And use appropriate casts to reduce sparse warnings if CONFIG_SPARSE_RCU_POINTER=y Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Add __rcu annotations to : (struct dst_entry)->rt_next (struct rt_hash_bucket)->chain And use appropriate rcu primitives to reduce sparse warnings if CONFIG_SPARSE_RCU_POINTER=y Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Somnath Kotur 提交于
When async mcc compls are rcvd on an i/f that is down (and so interrupts are disabled) they just lie unprocessed in the compl queue.The compl queue can eventually get filled up and cause the BE to lock up.The fix is to use be_worker to reap mcc compls when the i/f is down.be_worker is now launched in be_probe() and canceled in be_remove(). Signed-off-by: NSomnath Kotur <somnath.kotur@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
After running this bonding setup script modprobe bonding miimon=100 mode=0 max_bonds=1 ifconfig bond0 10.1.1.1/16 ifenslave bond0 eth1 ifenslave bond0 eth3 on s390 with qeth-driven slaves, modprobe -r fails with this message unregister_netdevice: waiting for bond0 to become free. Usage count = 1 due to twice detection of duplicate address. Problem is caused by a missing decrease of ifp->refcnt in addrconf_dad_failure. An extra call of in6_ifa_put(ifp) solves it. Problem has been introduced with commit f2344a13. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
NETIF_F_HW_CSUM indicates the ability to update an TCP/IP-style 16-bit checksum with the checksum of an arbitrary part of the packet data, whereas the FCoE CRC is something entirely different. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org [2.6.32+] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
dev_can_checksum() incorrectly returns true in these cases: 1. The skb has both out-of-band and in-band VLAN tags and the device supports checksum offload for the encapsulated protocol but only with one layer of encapsulation. 2. The skb has a VLAN tag and the device supports generic checksumming but not in conjunction with VLAN encapsulation. Rearrange the VLAN tag checks to avoid these. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
gianfar: Fix crashes on RX path (Was Re: [Bugme-new] [Bug 19692] New: linux-2.6.36-rc5 crash with gianfar ethernet at full line rate traffic) The rx_recycle queue is global per device but can be accesed by many napi handlers at the same time, so it needs full skb_queue primitives (with locking). Otherwise, various crashes caused by broken skbs are possible. This patch resolves, at least partly, bugzilla bug 19692. (Because of some doubts that there could be still something around which is hard to reproduce my proposal is to leave this bug opened for a month.) Fixes commit: 0fd56bb5 ("gianfar: Add support for skb recycling") Reported-by: Nemin ak <eminak71@gmail.com> Tested-by: Nemin ak <eminak71@gmail.com> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> CC: Andy Fleming <afleming@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 10月, 2010 11 次提交
-
-
由 Glenn Wurster 提交于
There is a bug in the interaction between ipv6_create_tempaddr and addrconf_verify. Because ipv6_create_tempaddr uses the cstamp and tstamp from the public address in creating a private address, if we have not received a router advertisement in a while, tstamp + temp_valid_lft might be < now. If this happens, the new address is created inside ipv6_create_tempaddr, then the loop within addrconf_verify starts again and the address is immediately deleted. We are left with no temporary addresses on the interface, and no more will be created until the public IP address is updated. To avoid this, set the expiry time to be the minimum of the time left on the public address or the config option PLUS the current age of the public interface. Signed-off-by: NGlenn Wurster <gwurster@scs.carleton.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Glenn Wurster 提交于
If privacy extentions are enabled, but no current temporary address exists, then create one when we get a router advertisement. Signed-off-by: NGlenn Wurster <gwurster@scs.carleton.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
While fixing CONFIG_SPARSE_RCU_POINTER errors, I had to fix accesses to fz->fz_hash for real. - &fz->fz_hash[fn_hash(f->fn_key, fz)] + rcu_dereference(fz->fz_hash) + fn_hash(f->fn_key, fz) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Some panic reports in fib_rules_lookup() show a rule could have a NULL pointer as a next pointer in the rules_list. This can actually happen because of a bug in fib_nl_newrule() : It checks if current rule is the destination of unresolved gotos. (Other rules have gotos to this about to be inserted rule) Problem is it does the resolution of the gotos before the rule is inserted in the rules_list (and has a valid next pointer) Fix this by moving the rules_list insertion before the changes on gotos. A lockless reader can not any more follow a ctarget pointer, unless destination is ready (has a valid next pointer) Reported-by: NOleg A. Arkhangelsky <sysoleg@yandex.ru> Reported-by: NJoe Buehler <aspam@cox.net> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafael J. Wysocki 提交于
The tg3 driver calls device_set_wakeup_enable() under spin_lock_bh, which causes a problem to happen after the recent core power management changes, because this function can sleep now. Fix this by moving the device_set_wakeup_enable() call out of the spin_lock_bh-protected area. Reported-by: NMaxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marc Kleine-Budde 提交于
This patch sets the missing CAN_RTR_FLAG if a standard RTR frame is received. (For extended frames the CAN_RTR_FLAG was already set correctly.) Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marc Kleine-Budde 提交于
The priv is part of the memory allocated by alloc_candev(). This patch moved the free it after last usage of priv. Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Kaiser 提交于
If we continue on error, we'd likely free the IRQ that we didn't get, right? Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 10月, 2010 14 次提交
-
-
由 Randy Dunlap 提交于
Fix pch_can build when CONFIG_PCI is not enabled. It uses pci interfaces and data structures, so it should depend on PCI. drivers/net/can/pch_can.c:1044: error: implicit declaration of function 'pci_enable_msi' drivers/net/can/pch_can.c:1079: error: implicit declaration of function 'pci_disable_msi' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Add __rcu annotations to : (struct ip_ra_chain)->next struct ip_ra_chain *ip_ra_chain; And use appropriate rcu primitives. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Add __rcu annotation to : (struct sock)->sk_filter And use appropriate rcu primitives to reduce sparse warnings if CONFIG_SPARSE_RCU_POINTER=y Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
add __rcu annotation to (struct net)->gen, and use rcu_dereference_protected() in net_assign_generic() Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Add __rcu annotations to : (struct netdev_rx_queue)->rps_map (struct netdev_rx_queue)->rps_flow_table struct rps_sock_flow_table *rps_sock_flow_table; And use appropriate rcu primitives. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KOVACS Krisztian 提交于
One of the previous tproxy related patches split IPv6 defragmentation and connection tracking, but did not correctly add Kconfig stanzas to handle the new dependencies correctly. This patch fixes that by making the config options mirror the setup we have for IPv4: a distinct config option for defragmentation that is automatically selected by both connection tracking and xt_TPROXY/xt_socket. The patch also changes the #ifdefs enclosing IPv6 specific code in xt_socket and xt_TPROXY: we only compile these in case we have ip6tables support enabled. Signed-off-by: NKOVACS Krisztian <hidden@balabit.hu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
(struct ip6_tnl)->next is rcu protected : (struct ip_tunnel)->next is rcu protected : (struct xfrm6_tunnel)->next is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
(struct net_device)->garp_port is rcu protected : (struct garp_port)->applicants is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
(struct net_device)->ip6_ptr is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
(struct net_device)->vlgrp is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This driver tries to do up to half-second udelay() calls, which overflows on x86-64. Reported-by: NAndi Kleen <andi@firstfloor.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Three is definitely too low, and we know from reports that GRE tunnels stacked as deeply as 37 levels cause stack overflows, so pick some reasonable value between those two. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eli Cohen 提交于
When searching for a free entry in either mlx4_register_vlan() or mlx4_register_mac(), and there is no free entry, the loop terminates without updating the local variable free thus causing out of array bounds access. Fix this by adding a proper check outside the loop. Signed-off-by: NEli Cohen <eli@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joshua Hoke 提交于
On a busy network, the macb driver could get stuck in the interrupt handler, quickly triggering the watchdog, due to a confluence of factors: 1. macb_poll re-enables interrupts unconditionally, even when it will be called again because it exhausted its rx budget 2. macb_interrupt only disables interrupts after scheduling macb_poll, but scheduling fails when macb_poll is already scheduled because it didn't call napi_complete 3. macb_interrupt loops until the interrupt status register is clear, which will never happen in this case if the driver doesn't disable the RX interrupt Since macb_interrupt runs in interrupt context, this effectively locks up the machine, triggering the hardware watchdog. This issue was readily reproducible on a flooded network with a modified 2.6.27.48 kernel. The same problem appears to still be in the 2.6.36-rc8 driver code, so I am submitting this patch against that version. I have not tested this version of the patch except to make sure the kernel compiles. Signed-off-by: NJoshua Hoke <joshua.hoke@sixnet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-