This patch fixes the following oops, which could be trigged by build the kernel
with many concurrent threads, under CONFIG_DEBUG_PAGEALLOC.

hpte_insert() might return -1, indicating that the bucket (primary here)
is full. We are not necessarily reporting a BUG in this case. Instead, we could
try repeatedly (try secondary, remove and try again) until we find a slot.

[  543.075675] ------------[ cut here ]------------
[  543.075701] kernel BUG at arch/powerpc/mm/hash_utils_64.c:1239!
[  543.075714] Oops: Exception in kernel mode, sig: 5 [#1]
[  543.075722] PREEMPT SMP NR_CPUS=16 DEBUG_PAGEALLOC NUMA pSeries
[  543.075741] Modules linked in: binfmt_misc ehea
[  543.075759] NIP: c000000000036eb0 LR: c000000000036ea4 CTR: c00000000005a594
[  543.075771] REGS: c0000000a90832c0 TRAP: 0700   Not tainted  (3.8.0-next-20130222)
[  543.075781] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>  CR: 22224482  XER: 00000000
[  543.075816] SOFTE: 0
[  543.075823] CFAR: c00000000004c200
[  543.075830] TASK = c0000000e506b750[23934] 'cc1' THREAD: c0000000a9080000 CPU: 1
GPR00: 0000000000000001 c0000000a9083540 c000000000c600a8 ffffffffffffffff
GPR04: 0000000000000050 fffffffffffffffa c0000000a90834e0 00000000004ff594
GPR08: 0000000000000001 0000000000000000 000000009592d4d8 c000000000c86854
GPR12: 0000000000000002 c000000006ead300 0000000000a51000 0000000000000001
GPR16: f000000003354380 ffffffffffffffff ffffffffffffff80 0000000000000000
GPR20: 0000000000000001 c000000000c600a8 0000000000000001 0000000000000001
GPR24: 0000000003354380 c000000000000000 0000000000000000 c000000000b65950
GPR28: 0000002000000000 00000000000cd50e 0000000000bf50d9 c000000000c7c230
[  543.076005] NIP [c000000000036eb0] .kernel_map_pages+0x1e0/0x3f8
[  543.076016] LR [c000000000036ea4] .kernel_map_pages+0x1d4/0x3f8
[  543.076025] Call Trace:
[  543.076033] [c0000000a9083540] [c000000000036ea4] .kernel_map_pages+0x1d4/0x3f8 (unreliable)
[  543.076053] [c0000000a9083640] [c000000000167638] .get_page_from_freelist+0x6cc/0x8dc
[  543.076067] [c0000000a9083800] [c000000000167a48] .__alloc_pages_nodemask+0x200/0x96c
[  543.076082] [c0000000a90839c0] [c0000000001ade44] .alloc_pages_vma+0x160/0x1e4
[  543.076098] [c0000000a9083a80] [c00000000018ce04] .handle_pte_fault+0x1b0/0x7e8
[  543.076113] [c0000000a9083b50] [c00000000018d5a8] .handle_mm_fault+0x16c/0x1a0
[  543.076129] [c0000000a9083c00] [c0000000007bf1dc] .do_page_fault+0x4d0/0x7a4
[  543.076144] [c0000000a9083e30] [c0000000000090e8] handle_page_fault+0x10/0x30
[  543.076155] Instruction dump:
[  543.076163] 7c630038 78631d88 e80a0000 f8410028 7c0903a6 e91f01de e96a0010 e84a0008
[  543.076192] 4e800421 e8410028 7c7107b4 7a200fe0 <0b000000> 7f63db78 48785781 60000000
[  543.076224] ---[ end trace bd5807e8d6ae186b ]---
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Move the logic trying to insert hpte in __hash_page_huge() to an helper
function, so it could also be used by others.
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

It seems that new_pte and rflags don't get changed in the repeating loop, so
move their assignment out of the loop.
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Add a PCI quirk for VGA devices on Power to set the default VGA device.
Ensures a default VGA is always set if a graphics adapter is present,
even if firmware did not initialize it. If more than one graphics
adapter is present, ensure the one initialized by firmware is set
as the default VGA device. This ensures that X autoconfiguration
will work.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Set dev->dev.type in alloc_pci_dev so that archs that have their own
versions of pci_setup_device get this set properly in order to ensure
things like the boot_vga sysfs parameter get created as expected.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Powerpc initializes the DMA and IRQ information in pci_scan_child_bus()->
pcibios_fixup_bus()->pcibios_setup_bus_devices(). But for the devices
which are hotpluged, bus->is added has been set for the first scan of the
PCI-e bus, so the initialization code won't be called. Then the hotpluged
devices' driver will fail to load.

For example :
The PCI-e device 0001:03:00.0 is the Intel PCI-e e1000e network card, remove
it from the system:

    # echo 1 > /sys/bus/pci/devices/0001\:03\:00.0/remove
    # e1000e 0001:03:00.0 eth0: removed PHC

Rescan it from it's bus:

    # echo 1 > /sys/bus/pci/devices/0001\:02\:00.0/rescan
    ...
    e1000e 0001:03:00.0: Disabling ASPM L0s L1
    e1000e 0001:03:00.0: No usable DMA configuration, aborting
    e1000e: probe of 0001:03:00.0 failed with error -5

So we move the DMA & IRQ initialization code from pcibios_setup_devices() and
construct a new function pcibios_enable_device. We call this function in
pcibios_enable_device, which will be called by PCI-e rescan code. At the
meanwhile, we avoid the the impact on cardbus. I also validate this patch with
silicon's PCIe-sata which encounters the IRQ issue.
Signed-off-by: NYuanquan Chen <Yuanquan.Chen@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hiroo Matsumoto <matsumoto.hiroo@jp.fujitsu.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

This function has always been marked as __cpuinit, but is only called
from functions marked as __init and references an __initdata variable.
So change its annotation to __init.

Fixes this build warning:

WARNING: arch/powerpc/mm/built-in.o(.cpuinit.text+0x86): Section mismatch in reference from the function .fake_numa_create_new_node() to the variable .init.data:cmdline
The function __cpuinit .fake_numa_create_new_node() references
a variable __initdata cmdline.
If cmdline is only used by .fake_numa_create_new_node then
annotate cmdline with a matching annotation.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

The following commit breaks numa distance setup for old powerpc
systems that use form0 encoding in device tree.

commit 41eab6f8
powerpc/numa: Use form 1 affinity to setup node distance

Device tree node /rtas/ibm,associativity-reference-points would
index into /cpus/PowerPCxxxx/ibm,associativity based on form0 or
form1 encoding detected by ibm,architecture-vec-5 property.

All modern systems use form1 and current kernel code is correct.
However, on older systems with form0 encoding, the numa distance
will get hard coded as LOCAL_DISTANCE for all nodes.  This causes
task scheduling anomaly since scheduler will skip building numa
level domain (topmost domain with all cpus) if all numa distances
are same.  (value of 'level' in sched_init_numa() will remain 0)

Prior to the above commit:
((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)

Restoring compatible behavior with this patch for old powerpc systems
with device tree where numa distance are encoded as form0.
Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

This adds new debug feature information so that the DAWR can be
identified by userspace tools like GDB.

Unfortunately the DAWR doesn't sit nicely into the current description
that ptrace provides to userspace via struct ppc_debug_info.  It doesn't
allow for specifying that only some ranges are possible or even the end
alignment constraints (DAWR only allows 512 byte wide ranges which can't
cross a 512 byte boundary).

After talking to Edjunior Machado (GDB ppc developer), it was decided
this was the best approach.  Just mark it as debug feature DAWR and
tools like GDB can internally decide the constraints.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

This patch adds a new line to /proc/interrupts to account for the
doorbell interrupts that each hardware thread has received. The total
interrupt count in /proc/stat will now also include doorbells.

 # cat /proc/interrupts
           CPU0       CPU1       CPU2       CPU3
 16:        551       1267        281        175      XICS Level     IPI
LOC:       2037       1503       1688       1625   Local timer interrupts
SPU:          0          0          0          0   Spurious interrupts
CNT:          0          0          0          0   Performance monitoring interrupts
MCE:          0          0          0          0   Machine check exceptions
DBL:         42        550         20         91   Doorbell interrupts
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Given a PCI device with multiple functions in a DDW capable slot, the
following situation can be encountered: When the first function sets a
64-bit DMA mask, enable_ddw() will be called and we can fail to properly
configure DDW (the most common reason being the new DMA window's size is
not large enough to map all of an LPAR's memory). With the recent
changes to DDW, we remove the base window in order to determine if the
new window is of sufficient size to cover an LPAR's memory. We correctly
replace the base window if we find that not to be the case. However,
once we go through and re-configured 32-bit DMA via the IOMMU, the next
function of the adapter will go through the same process. And since DDW
is a characteristic of the slot itself, we are most likely going to fail
again. But to determine we are going to fail the second slot, we again
remove the base window -- but that is now in-use by the first
function/driver, which might be issuing I/O already.

To close this window, keep a list of all the failed struct device_nodes
that have failed to configure DDW. If the current device_node is in that
list, just fail out immediately and fall back to 32-bit DMA without
doing any DDW manipulation.
Signed-off-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

As Michael Ellerman mentioned, arch/powerpc/sysdev/msi_bitmap.c
already implemented bitmap to manage (alloc/free) MSI interrupts.
The patch intends to use that mechanism to manage MSI interrupts
for PowerNV platform.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Setup the HFSCR (Hypervisor Facility Status and Control Register) for POWER8
when running HV=1.  The HFSCR is the same as the FSCR except it's for
hypervisors.  It controls the available of various facilities in OS and
userspace levels.  It also indicates the cause of a hypervisor facility
unavailable interrupt (although we are not using this here).

This patch sets the facilities Linux knows about incase the firmware doesn't.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Add SPR number and bit definitions for the HFSCR (Hypervisor Facility Status
and Control Register).
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Currently ptrace_get_reg returns error as a value
what make impossible to tell whether it is a correct value or error code.

The patch adds a parameter which points to the real return data and
returns an error code.

As get_user_msr() never fails and it is used in multiple places so it has not
been changed by this patch.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

This fixes these errors when building UP with CONFIG_KVM_BOOK3S_64_HV=y:

arch/powerpc/kvm/book3s_hv.c:1855:2: error: implicit declaration of function 'inhibit_secondary_onlining' [-Werror=implicit-function-declaration]
arch/powerpc/kvm/book3s_hv.c:1862:2: error: implicit declaration of function 'uninhibit_secondary_onlining' [-Werror=implicit-function-declaration]
cc1: all warnings being treated as errors

and this error (with CONFIG_KVM_BOOK3S_64=m, or a vmlinux link error
with CONFIG_KVM_BOOK3S_64=y):

ERROR: "smp_send_reschedule" [arch/powerpc/kvm/kvm.ko] undefined!
make[2]: *** [__modpost] Error 1

The fix for the link error is suboptimal; ideally we want a self_ipi()
function from irq.c, connected at least to the MPIC code, to initiate
an IPI to this cpu.  The fix here at least lets the code build, and it
will work, just with interrupts being delayed sometimes.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

remove cast for kmalloc/kzalloc return value.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Signed-off-by: NAlex Grad <alex.grad@gmail.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

When I submitted commit 6805ab6d
("powerpc: drop unused Kconfig symbols") I apparently failed to notice
that my patch also made PREP_RESIDUAL and PPC_A2_DD2 unused. Drop these
now.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

The last users of Kconfig symbol MPC10X_OPENPIC were removed in v2.6.27.
Its Kconfig entry can be removed now.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

All users of Kconfig symbol 405EP were removed in release v2.6.27.
Remove this symbol (and a useless select of it) too.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NJosh Boyer <jwboyer@gmail.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Untested. As this typo was introduced in v3.3, with commit
9d670280 ("powerpc: Split ICSWX ACOP and
PID processing"), which actually added PPC_ICSWX_PID, this surely needs
testing.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

The Kconfig symbol MAX_ACTIVE_REGIONS is unused. Commit
0ee332c1 ("memblock: Kill
early_node_map[]") removed the only place were it was actually used. But
it did not remove its Kconfig entries (for powerpc and sh).

Remove those two entries (and the entry for metag, that popped up in
v3.9-rc1).
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

PPC_PREP is marked as BROKEN since v2.6.15. Remove all PReP specific
code now.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Commit c1fb6816 ("powerpc: Add
relocation on exception vector handlers") added two lines of code that
depend on the macro CONFIG_HVC_SCOM. That macro doesn't exist. Perhaps
it was intended to use CONFIG_PPC_SCOM here. But since
"maintence_interrupt" is a typo and there's nothing in arch/powerpc that
looks like maintenance_interrupt it seems best to just delete these
lines.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

The last user of Kconfig symbol 405GPR got removed in release v3.2.
Remove this symbol too.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NJosh Boyer <jwboyer@gmail.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

The Kconfig symbol PCI_PERMEDIA got removed in v2.6.24, through commit
e6b6e3ff ("[POWERPC] Remove APUS support
from arch/ppc"). Remove its last occurrence.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

There is no Kconfig symbol PPC_WSP_COPRO. The select statement for it is
a nop. Drop it.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Refresh and set CONFIG_RD_LZMA=y.
Signed-off-by: NGeoff Levand <geoff@infradead.org>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Use for_each_compatible_node() macro instead of open coding it.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

This fixes the following checkpatch.pl warnings:

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
+EXPORT_SYMBOL(kmap_prot);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
+EXPORT_SYMBOL(kmap_pte);
Signed-off-by: NValentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Signed-off-by: NAdrian-Leonard Radu <ady8radu@gmail.com>
Acked-by: NGeoff Levand <geoff@infradead.org>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

It's minor cleanup so that the function names comply with the
coding style.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

None of the users of DEFINE_BITOP pass a postfix, and as far as I can
tell none ever did, so drop it.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Memory allocated to rtas_firmware_flash_list in rtas_flash_write
is not freed during module exit. We hit below call trace if we
unload rtas_flash module after loading new firmware image and
before rebooting the system.

Call trace:
----------
Feb  6 08:42:10 eagle3 kernel: kmem_cache_destroy rtas_flash_cache: Slab cache still has objects
Feb  6 08:42:10 eagle3 kernel: Call Trace:
Feb  6 08:42:10 eagle3 kernel: [c00000001c303b40] [c000000000014940] .show_stack+0x70/0x1c0 (unreliable)
Feb  6 08:42:10 eagle3 kernel: [c00000001c303bf0] [c000000000199bec] .kmem_cache_destroy+0x15c/0x170
Feb  6 08:42:10 eagle3 kernel: [c00000001c303c90] [d000000006fa1208] .rtas_flash_cleanup+0x3c/0x80 [rtas_flash]
Feb  6 08:42:10 eagle3 kernel: [c00000001c303d20] [c0000000000f8970] .SyS_delete_module+0x1d0/0x2e0
Feb  6 08:42:10 eagle3 kernel: [c00000001c303e30] [c000000000009954] syscall_exit+0x0/0x94

This patch frees rtas_firmware_flash_list during module exit.
Signed-off-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Use macros in vpa calls.
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Flush lazy MMU when DEBUG_PAGEALLOC is set
  x86/mm/cpa/selftest: Fix false positive in CPA self test
  x86/mm/cpa: Convert noop to functional fix
  x86, mm: Patch out arch_flush_lazy_mmu_mode() when running on bare metal
  x86, mm, paravirt: Fix vmalloc_fault oops during lazy MMU updates

Pull scheduler fixes from Ingo Molnar:
 "Misc fixlets"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cputime: Fix accounting on multi-threaded processes
  sched/debug: Fix sd->*_idx limit range avoiding overflow
  sched_clock: Prevent 64bit inatomicity on 32bit systems
  sched: Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s

Pull perf fixes from Ingo Molnar:
 "Misc fixlets"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix error return code
  ftrace: Fix strncpy() use, use strlcpy() instead of strncpy()
  perf: Fix strncpy() use, use strlcpy() instead of strncpy()
  perf: Fix strncpy() use, always make sure it's NUL terminated
  perf: Fix ring_buffer perf_output_space() boundary calculation
  perf/x86: Fix uninitialized pt_regs in intel_pmu_drain_bts_buffer()