- 22 6月, 2020 3 次提交
-
-
由 Joseph Qi 提交于
fix #28198752 ext4 encryption will increase lock contention when opening directory and result in performance drop in case will-it-scale open1. Since we don't have explicit usecases as of now, so we decide to disabed it. Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: NDust Li <dust.li@linux.alibaba.com>
-
由 Yihao Wu 提交于
to #28143829 rq_clock_task is less than rq_clock when in VM, or when IRQ_TIME_ACCOUNTING is on. So they are not comparable when accounting elapsed time. This bug is not observed on host yet, because neither of these two conditions are met. Use rq_clock at both begin and end of exec_start_raw accumulation to fix this bug, because we expect steal% in cpuacct.proc_stat of VM's cgroups can reflect the cpu time the host steal from the guest. Fixes: c7552980 ("alinux: sched: Introduce per-cgroup steal accounting") Signed-off-by: NYihao Wu <wuyihao@linux.alibaba.com> Acked-by: NMichael Wang <yun.wang@linux.alibaba.com>
-
由 Masahiro Yamada 提交于
fix #28883562 commit e00d8880481497474792d28c14479a9fb6752046 upstream Commit c3ff2a5193fa ("powerpc/32: add stack protector support") caused kernel panic on PowerPC when an external module is used with CONFIG_STACKPROTECTOR because the 'prepare' target was not executed for the external module build. Commit e07db28eea38 ("kbuild: fix single target build for external module") turned it into a build error because the 'prepare' target is now executed but the 'prepare0' target is missing for the external module build. External module on arm/arm64 with CONFIG_STACKPROTECTOR_PER_TASK is also broken in the same way. Move 'PHONY += prepare0' to the common place. GNU Make is fine with missing rule for phony targets. I also removed the comment which is wrong irrespective of this commit. I minimize the change so it can be easily backported to 4.20.x To fix v4.20, please backport e07db28eea38 ("kbuild: fix single target build for external module"), and then this commit. Link: https://bugzilla.kernel.org/show_bug.cgi?id=201891 Fixes: e07db28eea38 ("kbuild: fix single target build for external module") Fixes: c3ff2a5193fa ("powerpc/32: add stack protector support") Fixes: 189af4657186 ("ARM: smp: add support for per-task stack canaries") Fixes: 0a1213fa7432 ("arm64: enable per-task stack canaries") Cc: linux-stable <stable@vger.kernel.org> # v4.20 Reported-by: NSamuel Holland <samuel@sholland.org> Reported-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NChunmei Xu <xuchunmei@linux.alibaba.com> Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
-
- 19 6月, 2020 1 次提交
-
-
由 Xu Yu 提交于
fix #28506983 Some ARM machines may have large memory capacity (e.g., more than 256G), or large hole(s) in memory layout among nodes. Kernel with CONFIG_ARM64_VA_BITS as 39 has the linear region size as 256G, and the memory that we will not be able to cover with the linear mapping shall be removed. This may cause part of the physical memory to become unavailable, system deadlock on memory, or even boot failure, on such ARM machines. This changes CONFIG_ARM64_VA_BITS to 48 which supports 128T linear mapping, in order to adapt to most scenarios. Signed-off-by: NXu Yu <xuyu@linux.alibaba.com> Reviewed-by: NShile Zhang <shile.zhang@linux.alibaba.com> Reviewed-by: NCaspar Zhang <caspar@linux.alibaba.com>
-
- 16 6月, 2020 36 次提交
-
-
由 Shile Zhang 提交于
to #28727280 commit 191941692a3d1b6a9614502b279be062926b70f5 upstream. Some users prefer kdump tools to generate guest kernel dumpfile, at the same time, need a out-of-band kernel panic event. Currently if booting guest kernel with 'crash_kexec_post_notifiers', QEMU will receive PVPANIC_PANICKED event and stop VM. If booting guest kernel without 'crash_kexec_post_notifiers', guest will not call notifier chain. Add PVPANIC_CRASH_LOADED bit for pvpanic event, it means that guest kernel actually hit a kernel panic, but the guest kernel wants to handle by itself. Signed-off-by: Nzhenwei pi <pizhenwei@bytedance.com> Link: https://lore.kernel.org/r/20200102023513.318836-3-pizhenwei@bytedance.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Trond Myklebust 提交于
task #28557789 [ Upstream commit 862f35c94730c9270833f3ad05bd758a29f204ed ] If we just set the mirror count to 1 without first clearing out the mirrors, we can leak queued up requests. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Misono Tomohiro 提交于
task #28557789 [ Upstream commit 8605cf0e852af3b2c771c18417499dc4ceed03d5 ] When dreq is allocated by nfs_direct_req_alloc(), dreq->kref is initialized to 2. Therefore we need to call nfs_direct_req_release() twice to release the allocated dreq. Usually it is called in nfs_file_direct_{read, write}() and nfs_direct_complete(). However, current code only calls nfs_direct_req_relese() once if nfs_get_lock_context() fails in nfs_file_direct_{read, write}(). So, that case would result in memory leak. Fix this by adding the missing call. Signed-off-by: NMisono Tomohiro <misono.tomohiro@jp.fujitsu.com> Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Trond Myklebust 提交于
task #28557789 commit add42de31721fa29ed77a7ce388674d69f9d31a4 upstream. When we detach a subrequest from the list, we must also release the reference it holds to the parent. Fixes: 5b2b5187 ("NFS: Fix nfs_page_group_destroy() and nfs_lock_and_join_requests() race cases") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Scott Mayhew 提交于
task #28557789 [ Upstream commit 55dee1bc0d72877b99805e42e0205087e98b9edd ] An NFS client that mounts multiple exports from the same NFS server with higher NFSv4 versions disabled (i.e. 4.2) and without forcing a specific NFS version results in fscache index cookie collisions and the following messages: [ 570.004348] FS-Cache: Duplicate cookie detected Each nfs_client structure should have its own fscache index cookie, so add the minorversion to nfs_server_key. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200145Signed-off-by: NScott Mayhew <smayhew@redhat.com> Signed-off-by: NDave Wysochanski <dwysocha@redhat.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Wenwen Wang 提交于
task #28557789 [ Upstream commit 123c23c6a7b7ecd2a3d6060bea1d94019f71fd66 ] In _nfs42_proc_copy(), 'res->commit_res.verf' is allocated through kzalloc() if 'args->sync' is true. In the following code, if 'res->synchronous' is false, handle_async_copy() will be invoked. If an error occurs during the invocation, the following code will not be executed and the error will be returned . However, the allocated 'res->commit_res.verf' is not deallocated, leading to a memory leak. This is also true if the invocation of process_copy_commit() returns an error. To fix the above leaks, redirect the execution to the 'out' label if an error is encountered. Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Trond Myklebust 提交于
task #28557789 commit 221203ce6406273cf00e5c6397257d986c003ee6 upstream. Instead of making assumptions about the commit verifier contents, change the commit code to ensure we always check that the verifier was set by the XDR code. Fixes: f54bcf2e ("pnfs: Prepare for flexfiles by pulling out common code") Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Trond Myklebust 提交于
task #28557789 commit 0df68ced55443243951d02cc497be31fadf28173 upstream. If we suffer a fatal error upon writing a file, which causes us to need to revalidate the entire mapping, then we should also revalidate the file size. Fixes: d2ceb7e57086 ("NFS: Don't use page_file_mapping after removing the page") Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Trond Myklebust 提交于
task #28557789 commit 114de38225d9b300f027e2aec9afbb6e0def154b upstream. When a NFS directory page cache page is removed from the page cache, its contents are freed through a call to nfs_readdir_clear_array(). To prevent the removal of the page cache entry until after we've finished reading it, we must take the page lock. Fixes: 11de3b11 ("NFS: Fix a memory leak in nfs_readdir") Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: NBenjamin Coddington <bcodding@redhat.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Trond Myklebust 提交于
task #28557789 commit 4b310319c6a8ce708f1033d57145e2aa027a883c upstream. nfs_readdir_xdr_to_array() must not exit without having initialised the array, so that the page cache deletion routines can safely call nfs_readdir_clear_array(). Furthermore, we should ensure that if we exit nfs_readdir_filler() with an error, we free up any page contents to prevent a leak if we try to fill the page again. Fixes: 11de3b11 ("NFS: Fix a memory leak in nfs_readdir") Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: NBenjamin Coddington <bcodding@redhat.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Trond Myklebust 提交于
task #28557789 [ Upstream commit 108bb4afd351d65826648a47f11fa3104e250d9b ] If the attempt to instantiate the mirror's layout DS pointer failed, then that pointer may hold a value of type ERR_PTR(), so we need to check that before we dereference it. Fixes: 65990d1a ("pNFS/flexfiles: Fix a deadlock on LAYOUTGET") Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Anna Schumaker 提交于
task #28557789 [ Upstream commit 1a3466aed3a17eed41cd9411f89eb637f58349b0 ] These really should have been there from the beginning, but we never noticed because there was enough slack in the RPC request for the extra bytes. Chuck's recent patch to use au_cslack and au_rslack to compute buffer size shrunk the buffer enough that this was now a problem for SEEK operations on my test client. Fixes: f4ac1674 ("nfs: Add ALLOCATE support") Fixes: 2e72448b ("NFS: Add COPY nfs operation") Fixes: cb95deea ("NFS OFFLOAD_CANCEL xdr") Fixes: 624bd5b7 ("nfs: Add DEALLOCATE support") Fixes: 1c6dcbe5 ("NFS: Implement SEEK") Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Trond Myklebust 提交于
task #28557789 [ Upstream commit 5085607d209102b37b169bc94d0aa39566a9842a ] If a bulk layout recall or a metadata server reboot coincides with a umount, then holding a reference to an inode is unsafe unless we also hold a reference to the super block. Fixes: fd9a8d71 ("NFSv4.1: Fix bulk recall and destroy of layouts") Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Trond Myklebust 提交于
task #28557789 [ Upstream commit 6f9449be53f3ce383caed797708b332ede8d952c ] Fix a soft lockup when NFS client delegation recovery is attempted but the inode is in the process of being freed. When the igrab(inode) call fails, and we have to restart the recovery process, we need to ensure that we won't attempt to recover the same delegation again. Fixes: 45870d69 ("NFSv4.1: Test delegation stateids when server...") Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Trond Myklebust 提交于
task #28557789 commit 5326de9e94bedcf7366e7e7625d4deb8c1f1ca8a upstream. If nfs4_delegreturn_prepare needs to wait for a layoutreturn to complete then make sure we drop the sequence slot if we hold it. Fixes: 1c5bd76d ("pNFS: Enable layoutreturn operation for return-on-close") Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Trond Myklebust 提交于
task #28557789 commit ad97a995d8edff820d4238bd0dfc69f440031ae6 upstream. Encode the mtime correctly. Fixes: 95582b00 ("vfs: change inode times to use struct timespec64") Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Darrick J. Wong 提交于
task #28557760 [ Upstream commit c142932c29e533ee892f87b44d8abc5719edceec ] In the reflink extent remap function, it turns out that uirec (the block mapping corresponding only to the part of the passed-in mapping that got unmapped) was not fully initialized. Specifically, br_state was not being copied from the passed-in struct to the uirec. This could lead to unpredictable results such as the reflinked mapping being marked unwritten in the destination file. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Eric Biggers 提交于
task #28557760 commit 10a98cb16d80be3595fdb165fad898bb28b8b6d2 upstream. Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set during do_exit(). That can confuse things. In particular, if BSD process accounting is enabled, then do_exit() writes data to an accounting file. If that file has FS_SYNC_FL set, then this write occurs synchronously and can misbehave if PF_MEMALLOC is set. For example, if the accounting file is located on an XFS filesystem, then a WARN_ON_ONCE() in iomap_do_writepage() is triggered and the data doesn't get written when it should. Or if the accounting file is located on an ext4 filesystem without a journal, then a WARN_ON_ONCE() in ext4_write_inode() is triggered and the inode doesn't get written. Fix this in xfsaild() by using the helper functions to save and restore PF_MEMALLOC. This can be reproduced as follows in the kvm-xfstests test appliance modified to add the 'acct' Debian package, and with kvm-xfstests's recommended kconfig modified to add CONFIG_BSD_PROCESS_ACCT=y: mkfs.xfs -f /dev/vdb mount /vdb touch /vdb/file chattr +S /vdb/file accton /vdb/file mkfs.xfs -f /dev/vdc mount /vdc umount /vdc It causes: WARNING: CPU: 1 PID: 336 at fs/iomap/buffered-io.c:1534 CPU: 1 PID: 336 Comm: xfsaild/vdc Not tainted 5.6.0-rc5 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014 RIP: 0010:iomap_do_writepage+0x16b/0x1f0 fs/iomap/buffered-io.c:1534 [...] Call Trace: write_cache_pages+0x189/0x4d0 mm/page-writeback.c:2238 iomap_writepages+0x1c/0x33 fs/iomap/buffered-io.c:1642 xfs_vm_writepages+0x65/0x90 fs/xfs/xfs_aops.c:578 do_writepages+0x41/0xe0 mm/page-writeback.c:2344 __filemap_fdatawrite_range+0xd2/0x120 mm/filemap.c:421 file_write_and_wait_range+0x71/0xc0 mm/filemap.c:760 xfs_file_fsync+0x7a/0x2b0 fs/xfs/xfs_file.c:114 generic_write_sync include/linux/fs.h:2867 [inline] xfs_file_buffered_aio_write+0x379/0x3b0 fs/xfs/xfs_file.c:691 call_write_iter include/linux/fs.h:1901 [inline] new_sync_write+0x130/0x1d0 fs/read_write.c:483 __kernel_write+0x54/0xe0 fs/read_write.c:515 do_acct_process+0x122/0x170 kernel/acct.c:522 slow_acct_process kernel/acct.c:581 [inline] acct_process+0x1d4/0x27c kernel/acct.c:607 do_exit+0x83d/0xbc0 kernel/exit.c:791 kthread+0xf1/0x140 kernel/kthread.c:257 ret_from_fork+0x27/0x50 arch/x86/entry/entry_64.S:352 This bug was originally reported by syzbot at https://lore.kernel.org/r/0000000000000e7156059f751d7b@google.com. Reported-by: syzbot+1f9dc49e8de2582d90c2@syzkaller.appspotmail.com Signed-off-by: NEric Biggers <ebiggers@google.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Brian Foster 提交于
task #28557760 commit 4b674b9ac852937af1f8c62f730c325fb6eadcdb upstream. The filesystem freeze sequence in XFS waits on any background eofblocks or cowblocks scans to complete before the filesystem is quiesced. At this point, the freezer has already stopped the transaction subsystem, however, which means a truncate or cowblock cancellation in progress is likely blocked in transaction allocation. This results in a deadlock between freeze and the associated scanner. Fix this problem by holding superblock write protection across calls into the block reapers. Since protection for background scans is acquired from the workqueue task context, trylock to avoid a similar deadlock between freeze and blocking on the write lock. Fixes: d6b636eb ("xfs: halt auto-reclamation activities while rebuilding rmap") Reported-by: NPaul Furtado <paulfurtado91@gmail.com> Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChandan Rajendra <chandanrlinux@gmail.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAllison Collins <allison.henderson@oracle.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 kaixuxia 提交于
task #28557760 commit bc56ad8c74b8588685c2875de0df8ab6974828ef upstream. When performing rename operation with RENAME_WHITEOUT flag, we will hold AGF lock to allocate or free extents in manipulating the dirents firstly, and then doing the xfs_iunlink_remove() call last to hold AGI lock to modify the tmpfile info, so we the lock order AGI->AGF. The big problem here is that we have an ordering constraint on AGF and AGI locking - inode allocation locks the AGI, then can allocate a new extent for new inodes, locking the AGF after the AGI. Hence the ordering that is imposed by other parts of the code is AGI before AGF. So we get an ABBA deadlock between the AGI and AGF here. Process A: Call trace: ? __schedule+0x2bd/0x620 schedule+0x33/0x90 schedule_timeout+0x17d/0x290 __down_common+0xef/0x125 ? xfs_buf_find+0x215/0x6c0 [xfs] down+0x3b/0x50 xfs_buf_lock+0x34/0xf0 [xfs] xfs_buf_find+0x215/0x6c0 [xfs] xfs_buf_get_map+0x37/0x230 [xfs] xfs_buf_read_map+0x29/0x190 [xfs] xfs_trans_read_buf_map+0x13d/0x520 [xfs] xfs_read_agf+0xa6/0x180 [xfs] ? schedule_timeout+0x17d/0x290 xfs_alloc_read_agf+0x52/0x1f0 [xfs] xfs_alloc_fix_freelist+0x432/0x590 [xfs] ? down+0x3b/0x50 ? xfs_buf_lock+0x34/0xf0 [xfs] ? xfs_buf_find+0x215/0x6c0 [xfs] xfs_alloc_vextent+0x301/0x6c0 [xfs] xfs_ialloc_ag_alloc+0x182/0x700 [xfs] ? _xfs_trans_bjoin+0x72/0xf0 [xfs] xfs_dialloc+0x116/0x290 [xfs] xfs_ialloc+0x6d/0x5e0 [xfs] ? xfs_log_reserve+0x165/0x280 [xfs] xfs_dir_ialloc+0x8c/0x240 [xfs] xfs_create+0x35a/0x610 [xfs] xfs_generic_create+0x1f1/0x2f0 [xfs] ... Process B: Call trace: ? __schedule+0x2bd/0x620 ? xfs_bmapi_allocate+0x245/0x380 [xfs] schedule+0x33/0x90 schedule_timeout+0x17d/0x290 ? xfs_buf_find+0x1fd/0x6c0 [xfs] __down_common+0xef/0x125 ? xfs_buf_get_map+0x37/0x230 [xfs] ? xfs_buf_find+0x215/0x6c0 [xfs] down+0x3b/0x50 xfs_buf_lock+0x34/0xf0 [xfs] xfs_buf_find+0x215/0x6c0 [xfs] xfs_buf_get_map+0x37/0x230 [xfs] xfs_buf_read_map+0x29/0x190 [xfs] xfs_trans_read_buf_map+0x13d/0x520 [xfs] xfs_read_agi+0xa8/0x160 [xfs] xfs_iunlink_remove+0x6f/0x2a0 [xfs] ? current_time+0x46/0x80 ? xfs_trans_ichgtime+0x39/0xb0 [xfs] xfs_rename+0x57a/0xae0 [xfs] xfs_vn_rename+0xe4/0x150 [xfs] ... In this patch we move the xfs_iunlink_remove() call to before acquiring the AGF lock to preserve correct AGI/AGF locking order. [Minor massage required due to upstream change making xfs_bumplink() a void function where as in the 4.19.y tree the return value is checked, even though it is always zero. Only change was to the last code block removed by the patch. Functionally equivalent to upstream.] Signed-off-by: Nkaixuxia <kaixuxia@tencent.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NSuraj Jitindar Singh <surajjs@amazon.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Darrick J. Wong 提交于
task #28557760 [ Upstream commit 5d1116d4c6af3e580f1ed0382ca5a94bd65a34cf ] Christoph Hellwig complained about the following soft lockup warning when running scrub after generic/175 when preemption is disabled and slub debugging is enabled: watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [xfs_scrub:161] Modules linked in: irq event stamp: 41692326 hardirqs last enabled at (41692325): [<ffffffff8232c3b7>] _raw_0 hardirqs last disabled at (41692326): [<ffffffff81001c5a>] trace0 softirqs last enabled at (41684994): [<ffffffff8260031f>] __do_e softirqs last disabled at (41684987): [<ffffffff81127d8c>] irq_e0 CPU: 3 PID: 16189 Comm: xfs_scrub Not tainted 5.4.0-rc3+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.124 RIP: 0010:_raw_spin_unlock_irqrestore+0x39/0x40 Code: 89 f3 be 01 00 00 00 e8 d5 3a e5 fe 48 89 ef e8 ed 87 e5 f2 RSP: 0018:ffffc9000233f970 EFLAGS: 00000286 ORIG_RAX: ffffffffff3 RAX: ffff88813b398040 RBX: 0000000000000286 RCX: 0000000000000006 RDX: 0000000000000006 RSI: ffff88813b3988c0 RDI: ffff88813b398040 RBP: ffff888137958640 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffea00042b0c00 R13: 0000000000000001 R14: ffff88810ac32308 R15: ffff8881376fc040 FS: 00007f6113dea700(0000) GS:ffff88813bb80000(0000) knlGS:00000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6113de8ff8 CR3: 000000012f290000 CR4: 00000000000006e0 Call Trace: free_debug_processing+0x1dd/0x240 __slab_free+0x231/0x410 kmem_cache_free+0x30e/0x360 xchk_ag_btcur_free+0x76/0xb0 xchk_ag_free+0x10/0x80 xchk_bmap_iextent_xref.isra.14+0xd9/0x120 xchk_bmap_iextent+0x187/0x210 xchk_bmap+0x2e0/0x3b0 xfs_scrub_metadata+0x2e7/0x500 xfs_ioc_scrub_metadata+0x4a/0xa0 xfs_file_ioctl+0x58a/0xcd0 do_vfs_ioctl+0xa0/0x6f0 ksys_ioctl+0x5b/0x90 __x64_sys_ioctl+0x11/0x20 do_syscall_64+0x4b/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe If preemption is disabled, all metadata buffers needed to perform the scrub are already in memory, and there are a lot of records to check, it's possible that the scrub thread will run for an extended period of time without sleeping for IO or any other reason. Then the watchdog timer or the RCU stall timeout can trigger, producing the backtrace above. To fix this problem, call cond_resched() from the scrub thread so that we back out to the scheduler whenever necessary. Reported-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Omar Sandoval 提交于
task #28557760 commit 69ffe5960df16938bccfe1b65382af0b3de51265 upstream. Commit 5b094d6d ("xfs: fix multi-AG deadlock in xfs_bunmapi") added a check in __xfs_bunmapi() to stop early if we would touch multiple AGs in the wrong order. However, this check isn't applicable for realtime files. In most cases, it just makes us do unnecessary commits. However, without the fix from the previous commit ("xfs: fix realtime file data space leak"), if the last and second-to-last extents also happen to have different "AG numbers", then the break actually causes __xfs_bunmapi() to return without making any progress, which sends xfs_itruncate_extents_flags() into an infinite loop. Fixes: 5b094d6d ("xfs: fix multi-AG deadlock in xfs_bunmapi") Signed-off-by: NOmar Sandoval <osandov@fb.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Brian Foster 提交于
task #28557760 [ Upstream commit 798a9cada4694ca8d970259f216cec47e675bfd5 ] syzbot (via KASAN) reports a use-after-free in the error path of xlog_alloc_log(). Specifically, the iclog freeing loop doesn't handle the case of a fully initialized ->l_iclog linked list. Instead, it assumes that the list is partially constructed and NULL terminated. This bug manifested because there was no possible error scenario after iclog list setup when the original code was added. Subsequent code and associated error conditions were added some time later, while the original error handling code was never updated. Fix up the error loop to terminate either on a NULL iclog or reaching the end of the list. Reported-by: syzbot+c732f8644185de340492@syzkaller.appspotmail.com Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Amir Goldstein 提交于
task #28557782 commit 300b124fcf6ad2cd99a7b721e0f096785e0a3134 upstream. Commit 6dde1e42f497 ("ovl: make i_ino consistent with st_ino in more cases"), relaxed the condition nfs_export=on in order to set the value of i_ino to xino map of real ino. Specifically, it also relaxed the pre-condition that index=on for consistent i_ino. This opened the corner case of lower hardlink in ovl_get_inode(), which calls ovl_fill_inode() with ino=0 and then ovl_init_inode() is called to set i_ino to lower real ino without the xino mapping. Pass the correct values of ino;fsid in this case to ovl_fill_inode(), so it can initialize i_ino correctly. Fixes: 6dde1e42f497 ("ovl: make i_ino consistent with st_ino in more ...") Signed-off-by: NAmir Goldstein <amir73il@gmail.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Miklos Szeredi 提交于
task #28557782 [ Upstream commit a4ac9d45c0cd14a2adc872186431c79804b77dbf ] ovl_lseek() is using ssize_t to return the value from vfs_llseek(). On a 32-bit kernel ssize_t is a 32-bit signed int, which overflows above 2 GB. Assign the return value of vfs_llseek() to loff_t to fix this. Reported-by: NBoris Gjenero <boris.gjenero@gmail.com> Fixes: 9e46b840c705 ("ovl: support stacked SEEK_HOLE/SEEK_DATA") Cc: <stable@vger.kernel.org> # v4.19 Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Qian Cai 提交于
task #28557737 [ Upstream commit 6c5d911249290f41f7b50b43344a7520605b1acb ] journal_head::b_transaction and journal_head::b_next_transaction could be accessed concurrently as noticed by KCSAN, LTP: starting fsync04 /dev/zero: Can't open blockdev EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) ================================================================== BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2] write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70: __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2] __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569 jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2] (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034 kjournald2+0x13b/0x450 [jbd2] kthread+0x1cd/0x1f0 ret_from_fork+0x27/0x50 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68: jbd2_write_access_granted+0x1b2/0x250 [jbd2] jbd2_write_access_granted at fs/jbd2/transaction.c:1155 jbd2_journal_get_write_access+0x2c/0x60 [jbd2] __ext4_journal_get_write_access+0x50/0x90 [ext4] ext4_mb_mark_diskspace_used+0x158/0x620 [ext4] ext4_mb_new_blocks+0x54f/0xca0 [ext4] ext4_ind_map_blocks+0xc79/0x1b40 [ext4] ext4_map_blocks+0x3b4/0x950 [ext4] _ext4_get_block+0xfc/0x270 [ext4] ext4_get_block+0x3b/0x50 [ext4] __block_write_begin_int+0x22e/0xae0 __block_write_begin+0x39/0x50 ext4_write_begin+0x388/0xb50 [ext4] generic_perform_write+0x15d/0x290 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe 5 locks held by fsync04/25724: #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260 #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4] #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2] #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4] #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2] irq event stamp: 1407125 hardirqs last enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790 softirqs last enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 The plain reads are outside of jh->b_state_lock critical section which result in data races. Fix them by adding pairs of READ|WRITE_ONCE(). Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NQian Cai <cai@lca.pw> Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pwSigned-off-by: NTheodore Ts'o <tytso@mit.edu> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 wangyan 提交于
task #28557737 commit 8eedabfd66b68a4623beec0789eac54b8c9d0fb6 upstream. I found a NULL pointer dereference in ocfs2_block_group_clear_bits(). The running environment: kernel version: 4.19 A cluster with two nodes, 5 luns mounted on two nodes, and do some file operations like dd/fallocate/truncate/rm on every lun with storage network disconnection. The fallocate operation on dm-23-45 caused an null pointer dereference. The information of NULL pointer dereference as follows: [577992.878282] JBD2: Error -5 detected when updating journal superblock for dm-23-45. [577992.878290] Aborting journal on device dm-23-45. ... [577992.890778] JBD2: Error -5 detected when updating journal superblock for dm-24-46. [577992.890908] __journal_remove_journal_head: freeing b_committed_data [577992.890916] (fallocate,88392,52):ocfs2_extend_trans:474 ERROR: status = -30 [577992.890918] __journal_remove_journal_head: freeing b_committed_data [577992.890920] (fallocate,88392,52):ocfs2_rotate_tree_right:2500 ERROR: status = -30 [577992.890922] __journal_remove_journal_head: freeing b_committed_data [577992.890924] (fallocate,88392,52):ocfs2_do_insert_extent:4382 ERROR: status = -30 [577992.890928] (fallocate,88392,52):ocfs2_insert_extent:4842 ERROR: status = -30 [577992.890928] __journal_remove_journal_head: freeing b_committed_data [577992.890930] (fallocate,88392,52):ocfs2_add_clusters_in_btree:4947 ERROR: status = -30 [577992.890933] __journal_remove_journal_head: freeing b_committed_data [577992.890939] __journal_remove_journal_head: freeing b_committed_data [577992.890949] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [577992.890950] Mem abort info: [577992.890951] ESR = 0x96000004 [577992.890952] Exception class = DABT (current EL), IL = 32 bits [577992.890952] SET = 0, FnV = 0 [577992.890953] EA = 0, S1PTW = 0 [577992.890954] Data abort info: [577992.890955] ISV = 0, ISS = 0x00000004 [577992.890956] CM = 0, WnR = 0 [577992.890958] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000f8da07a9 [577992.890960] [0000000000000020] pgd=0000000000000000 [577992.890964] Internal error: Oops: 96000004 [#1] SMP [577992.890965] Process fallocate (pid: 88392, stack limit = 0x00000000013db2fd) [577992.890968] CPU: 52 PID: 88392 Comm: fallocate Kdump: loaded Tainted: G W OE 4.19.36 #1 [577992.890969] Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019 [577992.890971] pstate: 60400009 (nZCv daif +PAN -UAO) [577992.891054] pc : _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2] [577992.891082] lr : _ocfs2_free_suballoc_bits+0x618/0x968 [ocfs2] [577992.891084] sp : ffff0000c8e2b810 [577992.891085] x29: ffff0000c8e2b820 x28: 0000000000000000 [577992.891087] x27: 00000000000006f3 x26: ffffa07957b02e70 [577992.891089] x25: ffff807c59d50000 x24: 00000000000006f2 [577992.891091] x23: 0000000000000001 x22: ffff807bd39abc30 [577992.891093] x21: ffff0000811d9000 x20: ffffa07535d6a000 [577992.891097] x19: ffff000001681638 x18: ffffffffffffffff [577992.891098] x17: 0000000000000000 x16: ffff000080a03df0 [577992.891100] x15: ffff0000811d9708 x14: 203d207375746174 [577992.891101] x13: 73203a524f525245 x12: 20373439343a6565 [577992.891103] x11: 0000000000000038 x10: 0101010101010101 [577992.891106] x9 : ffffa07c68a85d70 x8 : 7f7f7f7f7f7f7f7f [577992.891109] x7 : 0000000000000000 x6 : 0000000000000080 [577992.891110] x5 : 0000000000000000 x4 : 0000000000000002 [577992.891112] x3 : ffff000001713390 x2 : 2ff90f88b1c22f00 [577992.891114] x1 : ffff807bd39abc30 x0 : 0000000000000000 [577992.891116] Call trace: [577992.891139] _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2] [577992.891162] _ocfs2_free_clusters+0x100/0x290 [ocfs2] [577992.891185] ocfs2_free_clusters+0x50/0x68 [ocfs2] [577992.891206] ocfs2_add_clusters_in_btree+0x198/0x5e0 [ocfs2] [577992.891227] ocfs2_add_inode_data+0x94/0xc8 [ocfs2] [577992.891248] ocfs2_extend_allocation+0x1bc/0x7a8 [ocfs2] [577992.891269] ocfs2_allocate_extents+0x14c/0x338 [ocfs2] [577992.891290] __ocfs2_change_file_space+0x3f8/0x610 [ocfs2] [577992.891309] ocfs2_fallocate+0xe4/0x128 [ocfs2] [577992.891316] vfs_fallocate+0x11c/0x250 [577992.891317] ksys_fallocate+0x54/0x88 [577992.891319] __arm64_sys_fallocate+0x28/0x38 [577992.891323] el0_svc_common+0x78/0x130 [577992.891325] el0_svc_handler+0x38/0x78 [577992.891327] el0_svc+0x8/0xc My analysis process as follows: ocfs2_fallocate __ocfs2_change_file_space ocfs2_allocate_extents ocfs2_extend_allocation ocfs2_add_inode_data ocfs2_add_clusters_in_btree ocfs2_insert_extent ocfs2_do_insert_extent ocfs2_rotate_tree_right ocfs2_extend_rotate_transaction ocfs2_extend_trans jbd2_journal_restart jbd2__journal_restart /* handle->h_transaction is NULL, * is_handle_aborted(handle) is true */ handle->h_transaction = NULL; start_this_handle return -EROFS; ocfs2_free_clusters _ocfs2_free_clusters _ocfs2_free_suballoc_bits ocfs2_block_group_clear_bits ocfs2_journal_access_gd __ocfs2_journal_access jbd2_journal_get_undo_access /* I think jbd2_write_access_granted() will * return true, because do_get_write_access() * will return -EROFS. */ if (jbd2_write_access_granted(...)) return 0; do_get_write_access /* handle->h_transaction is NULL, it will * return -EROFS here, so do_get_write_access() * was not called. */ if (is_handle_aborted(handle)) return -EROFS; /* bh2jh(group_bh) is NULL, caused NULL pointer dereference */ undo_bg = (struct ocfs2_group_desc *) bh2jh(group_bh)->b_committed_data; If handle->h_transaction == NULL, then jbd2_write_access_granted() does not really guarantee that journal_head will stay around, not even speaking of its b_committed_data. The bh2jh(group_bh) can be removed after ocfs2_journal_access_gd() and before call "bh2jh(group_bh)->b_committed_data". So, we should move is_handle_aborted() check from do_get_write_access() into jbd2_journal_get_undo_access() and jbd2_journal_get_write_access() before the call to jbd2_write_access_granted(). Link: https://lore.kernel.org/r/f72a623f-b3f1-381a-d91d-d22a1c83a336@huawei.comSigned-off-by: NYan Wang <wangyan122@huawei.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Reviewed-by: NJun Piao <piaojun@huawei.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 zhangyi (F) 提交于
task #28557737 [ Upstream commit c96dceeabf765d0b1b1f29c3bf50a5c01315b820 ] Commit 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from an older transaction") set the BH_Freed flag when forgetting a metadata buffer which belongs to the committing transaction, it indicate the committing process clear dirty bits when it is done with the buffer. But it also clear the BH_Mapped flag at the same time, which may trigger below NULL pointer oops when block_size < PAGE_SIZE. rmdir 1 kjournald2 mkdir 2 jbd2_journal_commit_transaction commit transaction N jbd2_journal_forget set_buffer_freed(bh1) jbd2_journal_commit_transaction commit transaction N+1 ... clear_buffer_mapped(bh1) ext4_getblk(bh2 ummapped) ... grow_dev_page init_page_buffers bh1->b_private=NULL bh2->b_private=NULL jbd2_journal_put_journal_head(jh1) __journal_remove_journal_head(hb1) jh1 is NULL and trigger oops *) Dir entry block bh1 and bh2 belongs to one page, and the bh2 has already been unmapped. For the metadata buffer we forgetting, we should always keep the mapped flag and clear the dirty flags is enough, so this patch pick out the these buffers and keep their BH_Mapped flag. Link: https://lore.kernel.org/r/20200213063821.30455-3-yi.zhang@huawei.com Fixes: 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from an older transaction") Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: Nzhangyi (F) <yi.zhang@huawei.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 zhangyi (F) 提交于
task #28557737 [ Upstream commit 6a66a7ded12baa6ebbb2e3e82f8cb91382814839 ] There is no need to delay the clearing of b_modified flag to the transaction committing time when unmapping the journalled buffer, so just move it to the journal_unmap_buffer(). Link: https://lore.kernel.org/r/20200213063821.30455-2-yi.zhang@huawei.comReviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: Nzhangyi (F) <yi.zhang@huawei.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Vasily Averin 提交于
task #28557737 commit 1a8e9cf40c9a6a2e40b1e924b13ed303aeea4418 upstream. if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. Script below generates endless output $ q=;while read -r r;do echo "$((++q)) $r";done </proc/fs/jbd2/DEV/info https://bugzilla.kernel.org/show_bug.cgi?id=206283 Fixes: 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code and interface") Cc: stable@kernel.org Signed-off-by: NVasily Averin <vvs@virtuozzo.com> Reviewed-by: NJan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/d13805e5-695e-8ac3-b678-26ca2313629f@virtuozzo.comSigned-off-by: NTheodore Ts'o <tytso@mit.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Eric Biggers 提交于
task #28557685 commit cb85f4d23f794e24127f3e562cb3b54b0803f456 upstream. If EXT4_EXTENTS_FL is set on an inode while ext4_writepages() is running on it, the following warning in ext4_add_complete_io() can be hit: WARNING: CPU: 1 PID: 0 at fs/ext4/page-io.c:234 ext4_put_io_end_defer+0xf0/0x120 Here's a minimal reproducer (not 100% reliable) (root isn't required): while true; do sync done & while true; do rm -f file touch file chattr -e file echo X >> file chattr +e file done The problem is that in ext4_writepages(), ext4_should_dioread_nolock() (which only returns true on extent-based files) is checked once to set the number of reserved journal credits, and also again later to select the flags for ext4_map_blocks() and copy the reserved journal handle to ext4_io_end::handle. But if EXT4_EXTENTS_FL is being concurrently set, the first check can see dioread_nolock disabled while the later one can see it enabled, causing the reserved handle to unexpectedly be NULL. Since changing EXT4_EXTENTS_FL is uncommon, and there may be other races related to doing so as well, fix this by synchronizing changing EXT4_EXTENTS_FL with ext4_writepages() via the existing s_writepages_rwsem (previously called s_journal_flag_rwsem). This was originally reported by syzbot without a reproducer at https://syzkaller.appspot.com/bug?extid=2202a584a00fffd19fbf, but now that dioread_nolock is the default I also started seeing this when running syzkaller locally. Link: https://lore.kernel.org/r/20200219183047.47417-3-ebiggers@kernel.org Reported-by: syzbot+2202a584a00fffd19fbf@syzkaller.appspotmail.com Fixes: 6b523df4 ("ext4: use transaction reservation for extent conversion in ext4_end_io") Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Eric Biggers 提交于
task #28557685 commit bbd55937de8f2754adc5792b0f8e5ff7d9c0420e upstream. In preparation for making s_journal_flag_rwsem synchronize ext4_writepages() with changes to both the EXTENTS and JOURNAL_DATA flags (rather than just JOURNAL_DATA as it does currently), rename it to s_writepages_rwsem. Link: https://lore.kernel.org/r/20200219183047.47417-2-ebiggers@kernel.orgSigned-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Dan Carpenter 提交于
task #28557685 commit 37b0b6b8b99c0e1c1f11abbe7cf49b6d03795b3f upstream. If sbi->s_flex_groups_allocated is zero and the first allocation fails then this code will crash. The problem is that "i--" will set "i" to -1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1 is type promoted to unsigned and becomes UINT_MAX. Since UINT_MAX is more than zero, the condition is true so we call kvfree(new_groups[-1]). The loop will carry on freeing invalid memory until it crashes. Fixes: 7c990728b99e ("ext4: fix potential race between s_flex_groups online resizing and access") Reviewed-by: NSuraj Jitindar Singh <surajjs@amazon.com> Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountainSigned-off-by: NTheodore Ts'o <tytso@mit.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Suraj Jitindar Singh 提交于
task #28557685 commit 7c990728b99ed6fbe9c75fc202fce1172d9916da upstream. During an online resize an array of s_flex_groups structures gets replaced so it can get enlarged. If there is a concurrent access to the array and this memory has been reused then this can lead to an invalid memory access. The s_flex_group array has been converted into an array of pointers rather than an array of structures. This is to ensure that the information contained in the structures cannot get out of sync during a resize due to an accessor updating the value in the old structure after it has been copied but before the array pointer is updated. Since the structures them- selves are no longer copied but only the pointers to them this case is mitigated. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443 Link: https://lore.kernel.org/r/20200221053458.730016-4-tytso@mit.eduSigned-off-by: NSuraj Jitindar Singh <surajjs@amazon.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Suraj Jitindar Singh 提交于
task #28557685 commit df3da4ea5a0fc5d115c90d5aa6caa4dd433750a7 upstream. During an online resize an array of pointers to s_group_info gets replaced so it can get enlarged. If there is a concurrent access to the array in ext4_get_group_info() and this memory has been reused then this can lead to an invalid memory access. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443 Link: https://lore.kernel.org/r/20200221053458.730016-3-tytso@mit.eduSigned-off-by: NSuraj Jitindar Singh <surajjs@amazon.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Reviewed-by: NBalbir Singh <sblbir@amazon.com> Cc: stable@kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Theodore Ts'o 提交于
task #28557685 commit 1d0c3924a92e69bfa91163bda83c12a994b4d106 upstream. During an online resize an array of pointers to buffer heads gets replaced so it can get enlarged. If there is a racing block allocation or deallocation which uses the old array, and the old array has gotten reused this can lead to a GPF or some other random kernel memory getting modified. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443 Link: https://lore.kernel.org/r/20200221053458.730016-2-tytso@mit.eduReported-by: NSuraj Jitindar Singh <surajjs@amazon.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-