- 13 8月, 2008 14 次提交
-
-
由 Artem Bityutskiy 提交于
Increment the commit number at the beginnig of the commit, instead of doing this after the commit. This is needed for further optimizations. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
The 'last_reference' parameter of 'pack_inode()' is not really needed because 'inode->i_nlink' may be tested instead. Zap it. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Simplify 'ubifs_jnl_write_inode()' by removing the 'deletion' parameter which is not really needed because we may test inode->i_nlink and check whether this is a deletion or not. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Orphan inodes are deleted inodes which will disappear after FS re-mount. There is not need to write orphan inodes back, because they are not needed on the flash media. So optimize orphans a little by not writing them back. Just mark them as clean, free the budget, and report success to VFS. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Adrian Hunter 提交于
We use ubifs_ro_mode() quite a lot, and not in fast-path, so there is no reason to blow the code up by having it inlined. Also, we usually want R/O mode change to be seen to other CPUs as soon as possible, so when we make this a function call, we will automatically have a memory barrier. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Adrian Hunter 提交于
UBI transparently handles write errors by automatically copying and remapping the affected eraseblock. If UBI is unable to do that, for example its pool of eraseblocks reserved for bad block handling is empty, then the error is propagated to UBIFS. UBIFS must protect the media from falling into an inconsistent state by immediately switching to read-only mode. In the case of log updates, this was not being done. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
由 Adrian Hunter 提交于
UBIFS recovery testing debug facility simulates media failures. When simulating an IO error, the error code returned must be -EIO but it was not always if the user switched off the debug recovery testing option at the same time. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
由 Artem Bityutskiy 提交于
Although the inode is marked as clean when it is being deleted, it might stay and be used as orphan, and be marked as dirty. So we have to free the budget when we delete it. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
1. Print inode mode in some of debugging messages 2. Add few more useful assertions Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
The 'ubifs_release_dirty_inode_budget()' was buggy and incorrectly freed the budget, which led to not freeing all dirty data budget. This patch fixes that. Also, this patch fixes ubifs_mkdir() which passed 1 in dirty_ino_d, which makes no sense. Well, it is harmless though. Also, add few more useful assertions. And improve few debugging messages. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
We encouredge people to mount using volume name, not device numbers. So print the name of the mounted UBI volume, not just IDs. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Alexey Dobriyan 提交于
Short enough reads from /proc/irq/*/smp_affinity return -EINVAL for no good reason. This became noticed with NR_CPUS=4096 patches, when length of printed representation of cpumask becase 1152, but cat(1) continued to read with 1024-byte chunks. bitmap_scnprintf() in good faith fills buffer, returns 1023, check returns -EINVAL. Fix it by switching to seq_file, so handler will just fill buffer and doesn't care about offsets, length, filling EOF and all this crap. For that add seq_bitmap(), and wrappers around it -- seq_cpumask() and seq_nodemask(). Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Reviewed-by: NPaul Jackson <pj@sgi.com> Cc: Mike Travis <travis@sgi.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Weiyi 提交于
Removed duplicated #include <linux/quotaops.h> in fs/reiserfs/super.c. Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
The `size' argument was removed. Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 8月, 2008 2 次提交
-
-
由 Ingo Molnar 提交于
the names were too generic: drivers/uio/uio.c:87: error: expected identifier or '(' before 'do' drivers/uio/uio.c:87: error: expected identifier or '(' before 'while' drivers/uio/uio.c:113: error: 'map_release' undeclared here (not in a function) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Most the free-standing lock_acquire() usages look remarkably similar, sweep them into a new helper. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 09 8月, 2008 2 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Adrian Bunk 提交于
There doesn't seem to be a compelling reason why nfsd4_op_name() is marked as "inline": It's only used in a dprintk(), and as long as it has only one caller non-ancient gcc versions anyway inline it automatically. This patch fixes the following compile error with gcc 3.4: ... CC fs/nfsd/nfs4proc.o nfs4proc.c: In function `nfsd4_proc_compound': nfs4proc.c:854: sorry, unimplemented: inlining failed in call to nfs4proc.c:897: sorry, unimplemented: called from here make[3]: *** [fs/nfsd/nfs4proc.o] Error 1 Reported-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAdrian Bunk <bunk@kernel.org> [ Also made it "const char *" - Linus] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 8月, 2008 3 次提交
-
-
由 Jeff Layton 提交于
Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Break up cifs_setattr further by moving the logic that sets file times and dos attributes into a separate function. This patch also refactors the logic a bit so that when the file is already open then we go ahead and do a SetFileInfo call. SetPathInfo seems to be unreliable when setting times on open files. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Create a new cifs_setattr_unix function to handle a setattr when unix extensions are enabled and have cifs_setattr call it. Also, clean up variable declarations in cifs_setattr. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 06 8月, 2008 10 次提交
-
-
由 Denis ChengRq 提交于
Since introduced in 7ba1ba12, it should be made use of. Signed-off-by: NDenis ChengRq <crquan@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Steve French 提交于
Remove some long lines Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
If a server supports unix extensions but does not support POSIX create routines, then the client will create a new inode with a standard SMB mkdir or create/open call and then will set the mode. When it does this, it does not take the setgid bit on the parent directory into account. This patch has CIFS flip on the setgid bit when the parent directory has it. If the share is mounted with "setuids" then also change the group owner to the gid of the parent. This patch should apply cleanly on top of the setattr cleanup patches that I sent a few weeks ago. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
The new name is more clear since this is also used to set file attributes. We'll need the pid_of_opener arg so that we can pass in filehandles of other pids and spare ourselves an open call. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
CIFSSMBSetTimes is a deceptive name. This function does more that just set file times. Change it to CIFSSMBSetPathInfo, which is closer to its real purpose. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
Jeff left trailing whitespace in previous patch Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
We'd like to be able to use the unix SET_PATH_INFO_BASIC args to set file times as well, but that makes the argument list rather long. Bundle up the args for unix SET_PATH_INFO call into a struct. For now, we don't actually use the times fields anywhere. That will be done in a follow-on patch. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Alexander Beregalov 提交于
proc: fix warnings fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 4 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 5 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 6 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 7 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 8 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 9 has type 'u64' Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Acked-by: NAndrea Righi <righi.andrea@gmail.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexander Beregalov 提交于
fs/omfs/inode.c:495: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'u64' fs/omfs/inode.c:495: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type '__be64' Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Acked-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Suresh Jayaraman 提交于
Fix missing braces introduced during commit cea21805. Though setting wbrc to 0 keeps this from causing real bug, this should have been there. Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 05 8月, 2008 3 次提交
-
-
由 Nick Piggin 提交于
Like the page lock change, this also requires name change, so convert the raw test_and_set bitop to a trylock. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Converting page lock to new locking bitops requires a change of page flag operation naming, so we might as well convert it to something nicer (!TestSetPageLocked_Lock => trylock_page, SetPageLocked => set_page_locked). This also facilitates lockdeping of page lock. Signed-off-by: NNick Piggin <npiggin@suse.de> Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This reverts commit f9247273 (and fb2e405f - "fix fs/nfs/nfsroot.c compilation" - that fixed a missed conversion). The changes cause problems for at least the sparc build. Let's re-do them when the exact issues are resolved. Requested-by: NAndrew Morton <akpm@linux-foundation.org> Requested-by: NSteven Whitehouse <swhiteho@redhat.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 8月, 2008 1 次提交
-
-
由 Jeff Layton 提交于
The global tcpSesAllocCount variable is an atomic already and doesn't really need the extra locking around it. Remove the locking and just use the atomic_inc_return and atomic_dec_return functions to make sure we access it correctly. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 03 8月, 2008 2 次提交
-
-
由 Eric Sandeen 提交于
The variables 'from' and 'to' are not used anywhere. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Acked-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 OGAWA Hirofumi 提交于
FAT has to handle the newly introduced ATTR_TIMES_SET for allow_utime option. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 8月, 2008 1 次提交
-
-
由 Jeff Layton 提交于
...it doesn't look like it's being accounted for at the moment. Also try to reorganize the calculation to make it a little more evident what each piece means. This should probably go to the stable series as well... Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 01 8月, 2008 2 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
No need to open-code it... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-