ARM64: DT: Hisilicon SoC DT updates for 4.13

- Add and update Hi3660-Hikey960 board, Hi3660 PCIe RC, Hi6421v530 MFD and
  Hi3660 MMC binding
- Add and refine devices support for Hi3660-Hikey 960 including clock, reset,
  I2C, GPIO, UART, Bluetooth, RTC, Power Key, LED, SPI, timer, PMIC, regulator,
  sd/sdio and WiFi
- Add k3-dma and i2s/hdmi audio support based on audio-card-graph method for
  Hikey board

* tag 'hisi-arm64-dt-for-4.13-v2' of git://github.com/hisilicon/linux-hisi: (21 commits)
  arm64: dts: hi6220: Add k3-dma and i2s/hdmi audio support
  arm64: dts: hi3660-hikey960: add nodes for WiFi
  arm64: dts: hi3660: add sd/sdio device nodes
  dt-bindings: mmc: dw_mmc-k3: add document of hi3660 mmc
  arm64: dts: hikey960: add device node for pmic and regulators
  dt-bindings: mfd: hi6421: Add hi6421v530 compatible string
  arm64: dts: hisi: add kirin pcie node
  dt-bindings: PCI: hisi: Add document for PCIe of Kirin SoCs
  arm64: dts: hi3660: add sp804 timer node
  arm64: dts: hi3660: add spi device nodes
  arm64: dts: hikey960: add LED nodes
  arm64: dts: hi3660: add power key dts node
  arm64: dts: hi3660: Add pl031 rtc node
  arm64: dts: hikey960: add WL1837 Bluetooth device node
  arm64: dts: hi3660: Add uarts nodes
  arm64: dts: hi3660: add gpio dtsi file for Hisilicon Hi3660 SOC
  arm64: dts: Add I2C nodes for Hi3660
  arm64: dts: hi3660: add resources for clock and reset
  arm64: dts: hikey960: pinctrl: add more pinmux and pinconfig
  arm64: dts: hisilicon: update compatible string for hikey960
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64

ARMv8 Vexpress/Juno DT updates for v4.13

1. Adds support for Coresight CPU debug MMIO interface on all Juno variants.

2. Enables support for few SMMUs on Juno which were previously disabled
   waiting for IOMMU-backed DMA API support to be stabilised.

* tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: enable some SMMUs
  arm64: dts: juno: add coresight CPU debug nodes
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64

Allwinner H5 DT changes for 4.13

Just like the H3, this is mostly about enabling the EMAC on the H5, and
also has a new board, the Orange Pi Zero Plus 2

* tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: allwinner: h5: Add initial Orangepi Zero Plus 2 support
  arm64: allwinner: h5: enable dwmac-sun8i for Nano Pi NEO2
  arm64: allwinner: h5: enable dwmac-sun8i for Orange Pi Prime
  arm64: allwinner: h5: sort the device nodes in / part for some boards
  arm64: allwinner: h5: add support for NanoPi NEO2 board
  arm64: allwinner: h5: add support for Orange Pi Prime board
  arm64: allwinner: orangepi-pc2: Enable dwmac-sun8i
  arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
  arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
  ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64

Allwinner arm64 DT changes for 4.13

Our usual arm64 changes. The most notable things are the EMAC support and
USB support enhancements. There's also support for the SoPine SoM, and the
OrangePi Win.

* tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support
  arm64: allwinner: a64: add device tree for SoPine with baseboard
  arm64: allwinner: bananapi-m64: Enable dwmac-sun8i
  arm64: allwinner: pine64-plus: Enable dwmac-sun8i
  arm64: allwinner: pine64: Enable dwmac-sun8i
  arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver
  arm64: allwinner: sun50i-a64: Add dt node for the syscon control module
  arm64: allwinner: a64: add DTSI file for SoPine SoM
  arm64: allwinner: a64: Convert CCU raw number references to macros
  arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl
  arm64: allwinner: a64: enable RSB on A64
  arm64: dts: allwinner: pine64: Add remaining UART aliases
  arm64: dts: allwinner: a64: Add UART2 pin nodes
  arm64: allwinner: a64: enable EHCI0/OHCI0 for Pine64
  arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64

Amlogic 64-bit DT changes for v4.13
- cleanup/reorganize alphabetically to better avoid conflicts
- add HDMI and CVBS nodes for multiple boards
- new pinctrl pins: SPI, HDMI CEC
- SCPI: fix thermal sensor reporting

New board support
- NanoPi K2 (GXBB)
- R-Box Pro (GXM)

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (36 commits)
  ARM64: dts: meson-gxl-s905x-p212: Add HDMI and CVBS nodes
  ARM64: dts: meson-gxl-s905x-khadas-vim: Add HDMI nodes
  ARM64: dts: meson-gxl-s905d-p230: Add HDMI nodes
  ARM64: dts: meson-gxbb-wetek-play2: Add HDMI and CVBS Nodes
  ARM64: dts: meson-gx: Fix sensors reporting from SCP
  ARM64: dts: meson-gxl: Add SPI pinctrl nodes
  ARM64: dts: meson-gxbb: Add SPI pinctrl nodes
  ARM64: dts: meson-gxl: Add Ethernet PHY LEDS pins nodes
  ARM64: dts: meson-gxl: Add CEC pins nodes
  ARM64: dts: meson-gxbb: Add CEC pins nodes
  ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base
  ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
  ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
  arm64: dts: amlogic: Add NanoPi K2
  dt-bindings: arm: amlogic: Add NanoPi K2
  arm64: dts: meson-gxm: Add R-Box Pro
  dt-bindings: arm: amlogic: Add R-Box Pro
  dt-bindings: Add Kingnovel vendor prefix
  arm64: dts: meson-gx-p23x-q20x: Fix node order
  arm64: dts: meson-gxm-nexbox-a1: Fix node order
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM64-based SoCs Device Tree changes for
4.13. Please note the following from Eric:

I've based this summary on the bcm2835-dt-next tag, to clarify what's in this
patch series, but it does require being careful since it involves a cross-merge
between branches.

- Anup documents the Broadcom Stingray binding, common clocks, adds initial
  support for the Stingray DTSI and DTS files and adds support for the PL022,
  PL330 and SP805

- Sandeep adds the clock nodes to the Stingray Device Tree nodes

- Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes

- Oza adds I2C Device Tree nodes to the Stingray DTSes

- Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC

- Ravijeta adds support for the USB Dual Role PHY on Northstar 2

- Gerd starts adding references to the sdhost and sdhci controllers, and then
  switches the sdcard to to use the SDHOST (faster than SDHCI)

- Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi
  thermal driver to work correctly

* tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux:
  arm64: dts: NS2: Add USB DRD PHY device tree node
  ARM64: dts: bcm2837: Define CPU thermal coefficients
  arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
  arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
  arm64: dts: Add I2C DT nodes for Stingray SoC
  arm64: dts: Add GPIO DT nodes for Stingray SOC
  arm64: dts: Add pinctrl DT nodes for Stingray SOC
  arm64: dts: Add NAND DT nodes for Stingray SOC
  arm64: dts: Add clock DT nodes for Stingray SOC
  arm64: dts: Initial DTS files for Broadcom Stingray SOC
  dt-bindings: clk: Extend binding doc for Stingray SOC
  dt-bindings: bcm: Add Broadcom Stingray bindings document
  ARM: dts: bcm283x: switch from &sdhci to &sdhost
  arm64: dts: bcm2837: add &sdhci and &sdhost
  ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
  ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64

UniPhier ARM64 SoC DT updates for v4.13

- specify timing delay properties of eMMC
- fix W=1 build warnings
- increase memory reserve size
- use SPDX License Identifier
- add new board support (LD11/LD20 global)

* tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: add support for LD20 Global board
  arm64: dts: uniphier: add support for LD11 Global board
  arm64: dts: uniphier: use SPDX-License-Identifier
  arm64: dts: uniphier: reserve more memory for LD11/LD20
  arm64: dts: uniphier: fix simple-bus unit address format error
  arm64: dts: uniphier: Use - instead of @ for DT OPP entries
  arm64: dts: uniphier: add cdns, phy-dll-delay-sdclk(-hsmmc) for eMMC
  arm64: dts: uniphier: add input-delay properties to Cadence eMMC node
Signed-off-by: NOlof Johansson <olof@lixom.net>

Add device tree nodes for
mt8173:
- split USB SuperSpeed port in HighSpeed and SuperSpeed ports.
- move USB phy clocks up in hierarchy to met new bindings description
- move MDP nodes up in hierarchy to met new bindings description

mt6797:
- add basic SoC support
- add clock driver
- add power domain

dt-bindings:
- clean-up i2c binding description
- add binding for mt2701 i2c node
- add fallback compatible to scpsys binding description
- add bindings description for mt7622 and mt6796

* tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek:
  dt-bindings: mediatek: add bindings for MediaTek MT7622 SoC
  arm64: dts: mt8173: Fix mdp device tree
  dt-bindings: i2c: Add Mediatek MT2701 i2c binding
  dt-bindings: i2c-mtk: Add mt7623 binding
  dt-bindings: i2c-mtk: Delete bindings
  dt-bindings: i2c-mt6577: Rename file to reflect bindings
  dt-bindings: mtk-sysirq: Correct bindings for supported SoCs
  arm64: dts: mediatek: add clk and scp nodes for MT6797
  dt-bindings: mediatek: add MT6797 power dt-bindings
  arm64: dts: mediatek: add mt6797 support
  dt-bindings: mediatek: Add bindings for mediatek MT6797 Platform
  arm64: dts: mt8173: move clock from phy node into port nodes
  arm64: dts: mt8173: split usb SuperSpeed port into two ports
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64

Samsung DeviceTree ARM64 update for v4.13:
1. Remove unneeded TE interrupt gpio property.

* tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Remove the te-gpios property in the TM2 boards
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64

Support for the new rk3399 firefly board; extending the pcie ranges to
make usage of pci switches possible; some more qos and pinctrl nodes on
rk3399; updates for the rk3399 cpu operating points including separate
opps for the higher rates OP1 variant of the chip and mmc-nodes for
the rk3328.

* tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: update common rk3399 operating points
  arm64: dts: rockchip: introduce rk3399-op1 operating points
  arm64: dts: rockchip: enable usb3 controllers on rk3399-firefly
  arm64: dts: rockchip: add ethernet0 alias on rk3399
  arm64: dts: rockchip: bring rk3399-firefly power-tree in line
  arm64: dts: rockchip: add sdmmc/sdio/emmc nodes for RK3328 SoCs
  arm64: dts: rockchip: extent IORESOURCE_MEM_64 of PCIe for rk3399
  arm64: dts: rockchip: extent bus-ranges of PCIe for rk3399
  arm64: dts: rockchip: add pinctrl settings for some rk3399 peripherals
  arm64: dts: rockchip: add some missing qos nodes on rk3399
  arm64: dts: rockchip: add support for firefly-rk3399 board
  dt-bindings: add firefly-rk3399 board support
Signed-off-by: NOlof Johansson <olof@lixom.net>

Add entry for k3-dma driver and i2s/hdmi audio devices.

This enables HDMI audio output.

Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Green <andy@warmcat.com>
Cc: Dave Long <dave.long@linaro.org>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Antonio Borneo <borneo.antonio@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
v2:
* Split core i2s entry into dtsi and hdmi specific bits into
  hikey dts
v4:
* Rework simple-card to use many-dai-links method, as
  there may be other links in the future
v5:
* Rework audio description to use the audio-card-graph method
  as requested by Mark.
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Add nodes for WiFi. HiKey960 is using TI WL1837MOD module.
Signed-off-by: NGuodong Xu <guodong.xu@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Add sd/sdio device nodes for hi3660 soc
Signed-off-by: NLi Wei <liwei213@huawei.com>
Signed-off-by: NChen Jun <chenjun14@huawei.com>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Add bindings for hi3660 mmc support
Signed-off-by: NLi Wei <liwei213@huawei.com>
Signed-off-by: NGuodong Xu <guodong.xu@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

add device node for hi6421 pmic core and hi6421v530
voltage regulator,include LDO(1,3,9,11,15,16)
Signed-off-by: NWang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
Signed-off-by: NGuodong Xu <guodong.xu@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Add compatible string for HiSilicon Hi6421v530 PMIC.
Signed-off-by: NGuodong Xu <guodong.xu@linaro.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Add PCIe node for hi3660

Cc: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: NXiaowei Song <songxiaowei@hisilicon.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Changes in v5:
 * fix interrupt-map, to conform to gic's #address-cells = <0>
 * remove redundant status = "ok"
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

This patch adds document for PCIe of Kirin SoC series.
Signed-off-by: NXiaowei Song <songxiaowei@hisilicon.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

The Hi3660 SoC comes with the sp804 timer in addition to the
architecture timers. These ones are shutdown when reaching a deep idle
states and a backup timer is needed. The sp804 belongs to another power
domain and can fulfill the purpose of replacing temporarily an
architecture timer when the CPU is idle.

Describe it in the device tree, so it can be enabled at boot time.
Suggested-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Add spi2 and spi3 device nodes for hi3660, and enable them for hikey960.

On HiKey960:
 - SPI2 is wired out through low speed expansion connector.
 - SPI3 is wired out through high speed expansion connector.
Signed-off-by: NWang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
Signed-off-by: NGuodong Xu <guodong.xu@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

HiKey960 has four user LEDs, and two special purpose LEDs: WiFi and BT
respectively.

All of them are implemented as GPIO.
Signed-off-by: NGuodong Xu <guodong.xu@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

We use gpio_034 as power key on hikey960, and set gpio with pull-up
state, when key press the voltage on the gpio will come to lower, and
power key event will be reported.
Signed-off-by: NChen Jun <chenjun14@huawei.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGuodong Xu <guodong.xu@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Add dts node to enable pl031 rtc.
Signed-off-by: NChen Feng <puck.chen@hisilicon.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

This adds the serial slave device for the WL1837 Bluetooth interface.
Signed-off-by: NGuodong Xu <guodong.xu@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Add nodes uart0 to uart4 and uart6 for hi3660 SoC.
Enable uart3 and uart6, disable uart5, in hikey960 board dts.

On HiKey960:
 - UART6 is used as default console, and is wired out through low speed
         expansion connector.
 - UART3 has RTS/CTS hardware handshake, and is wired out through low
         speed expansion connector.
 - UART5 is not used in commercial launched boards. So disable it.
 - UART4 is connected to Bluetooth, WL1837.
Signed-off-by: NChen Feng <puck.chen@hisilicon.com>
Signed-off-by: NWang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
Signed-off-by: NGuodong Xu <guodong.xu@linaro.org>
Reviewed-by: NZhangfei Gao <zhangfei.gao@hisilicon.com>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

This patch adds pl061 device nodes for Hi3660 SoC.
Signed-off-by: NWang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Add I2C nodes for Hi3660-hikey960.

On HiKey960,
I2C0, I2C7 are connected to Low Speed Expansion Connector.
I2C1 is connected to ADV7535.
I2C3 is connected to USB5734.

Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NGuodong Xu <guodong.xu@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Add some resource nodes for clock and reset
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

This commit adds more pinmux and pinctrl information for devices
on HiKey960, including i2c, spi, cam, uart, ufs, pcie, csi, pwr_key,
isp, sd/sdio, i2s, and usb.
Signed-off-by: NWang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
Signed-off-by: NChen Jun <chenjun14@huawei.com>
Signed-off-by: NGuodong Xu <guodong.xu@linaro.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Update compatible string for hikey960. HiKey960 is a develpment board built
with SoC Hi3660.
Signed-off-by: NGuodong Xu <guodong.xu@linaro.org>
Signed-off-by: NChen Feng <puck.chen@hisilicon.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Add bindings for HiKey960 Board.
Signed-off-by: NGuodong Xu <guodong.xu@linaro.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

This pull request brings in the switch to sdhost for MMC on RPi3
(improving storage performance and leaving sdhci for wireless), and
the correct CPU thermal coefficients.

The thermal changes required a merge from bcm2835-dt-next, where the
nodes were added.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Orangepi Zero Plus 2 is an open-source single-board computer
using the Allwinner h5 SOC.

H5 Orangepi Zero Plus 2 has
- Quad-core Cortex-A53
- 512MB DDR3
- micrSD slot and 8GB eMMC
- Debug TTL UART
- HDMI
- Wifi + BT
- OTG+power supply
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Orangepi Win/WinPlus is an open-source single-board computer
using the Allwinner A64 SOC.

A64 Orangepi Win/WinPlus has
- A64 Quad-core Cortex-A53 64bit
- 1GB(Win)/2GB(Win Plus) DDR3 SDRAM
- Debug TTL UART
- Four USB 2.0
- HDMI
- LCD
- Audio and MIC
- Wifi + BT
- IR receiver
- 5V DC power supply
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Add initial device tree support for LD20 Global board.
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Add initial device tree support for LD11 Global board.
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Add HDMI and CVBS nodes for the Amlogic P212 reference board.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

Add HDMI nodes for the Khadas Vim board.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

Add HDMI nodes for the Amlogic P230 board.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

Add HDMI and CVBS nodes for the Wetek Play2 board.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>