There is a missing unlock on one fail path in ioapic_mmio_write,
fix that.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This changes bus accesses to use high-level kvm_io_bus_read/kvm_io_bus_write
functions. in_range now becomes unused so it is removed from device ops in
favor of read/write callbacks performing range checks internally.

This allows aliasing (mostly for in-kernel virtio), as well as better error
handling by making it possible to pass errors up to userspace.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Use slots_lock to protect device list on the bus.  slots_lock is already
taken for read everywhere, so we only need to take it for write when
registering devices.  This is in preparation to removing in_range and
kvm->lock around it.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Use it instead of open code "vcpu_id zero is BSP" assumption.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduce irq_lock, and use to protect ioapic data structures.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We modernize the io_device code so that we use container_of() instead of
dev->private, and move the vtable to a separate ops structure
(theoretically allows better caching for multiple instances of the same
ops structure)
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Acked-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The check for an edge is broken in current ioapic code. ioapic->irr is
cleared on each edge interrupt by ioapic_service() and this makes
old_irr != ioapic->irr condition in kvm_ioapic_set_irq() to be always
true. The patch fixes the code to properly recognise edge.

Some HW emulation calls set_irq() without level change. If each such
call is propagated to an OS it may confuse a device driver. This is the
case with keyboard device emulation and Windows XP x64  installer on SMP VM.
Each keystroke produce two interrupts (down/up) one interrupt is
submitted to CPU0 and another to CPU1. This confuses Windows somehow
and it ignores keystrokes.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Deliver interrupt during destination matching loop.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use kvm_apic_match_dest() in kvm_get_intr_delivery_bitmask() instead
of duplicating the same code. Use kvm_get_intr_delivery_bitmask() in
apic_send_ipi() to figure out ipi destination instead of reimplementing
the logic.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

ioapic_deliver() and kvm_set_msi() have code duplication. Move
the code into ioapic_deliver_entry() function and call it from
both places.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Get rid of ioapic_inj_irq() and ioapic_inj_nmi() functions.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Gleb fixed bitmap ops usage in kvm_ioapic_get_delivery_bitmask.

Sheng merged two functions, as well as fixed several issues in
kvm_get_intr_delivery_bitmask
1. deliver_bitmask is a bitmap rather than a unsigned long intereger.
2. Lowest priority target bitmap wrong calculated by mistake.
3. Prevent potential NULL reference.
4. Declaration in include/kvm_host.h caused powerpc compilation warning.
5. Add warning for guest broadcast interrupt with lowest priority delivery mode.
6. Removed duplicate bitmap clean up in caller of kvm_get_intr_delivery_bitmask.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

It's also convenient when we extend KVM supported vcpu number in the future.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In order to use with bit ops.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Prepared for reuse ioapic_redir_entry for MSI.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

IRQ injection status is either -1 (if there was no CPU found
that should except the interrupt because IRQ was masked or
ioapic was misconfigured or ...) or >= 0 in that case the
number indicates to how many CPUs interrupt was injected.
If the value is 0 it means that the interrupt was coalesced
and probably should be reinjected.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

IRQ ack notifications assume an identity mapping between pin->gsi,
which might not be the case with, for example, HPET.

Translate before acking.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Acked-by: NGleb Natapov <gleb@redhat.com>

Allow clients to request notifications when the guest masks or unmasks a
particular irq line.  This complements irq ack notifications, as the guest
will not ack an irq line that is masked.

Currently implemented for the ioapic only.
Signed-off-by: NAvi Kivity <avi@redhat.com>

It would be used for MSI in device assignment, for MSI dispatch.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Kick the NMI receiving VCPU in case the triggering caller runs in a
different context.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Before enabling notify_acked_irq for ia64, leave the related APIs as
nop-op first.
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Based on a patch from: Ben-Ami Yassour <benami@il.ibm.com>
which was based on a patch from: Amit Shah <amit.shah@qumranet.com>

Notify IRQ acking on PIC/APIC emulation. The previous patch missed two things:

- Edge triggered interrupts on IOAPIC
- PIC reset with IRR/ISR set should be equivalent to ack (LAPIC probably
needs something similar).
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
CC: Amit Shah <amit.shah@qumranet.com>
CC: Ben-Ami Yassour <benami@il.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Modify member in_range() of structure kvm_io_device to pass length and the type
of the I/O (write or read).

This modification allows to use kvm_io_device with coalesced MMIO.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

[avi: fix ia64 build breakage]
Signed-off-by: NSheng Yang <sheng.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The "remote_irr" variable is used to indicate an interrupt
which has been received by the LAPIC, but not acked.

In our EOI handler, we unset remote_irr and re-inject the
interrupt if the interrupt line is still asserted.

However, we do not set remote_irr here, leading to a
situation where if kvm_ioapic_set_irq() is called, then we go
ahead and call ioapic_service(). This means that IRR is
re-asserted even though the interrupt is currently in service
(i.e. LAPIC IRR is cleared and ISR/TMR set)

The issue with this is that when the currently executing
interrupt handler finishes and writes LAPIC EOI, then TMR is
unset and EOI sent to the IOAPIC. Since IRR is now asserted,
but TMR is not, then when the second interrupt is handled,
no EOI is sent and if there is any pending interrupt, it is
not re-injected.

This fixes a hang only seen while running mke2fs -j on an
8Gb virtio disk backed by a fully sparse raw file, with
aliguori "avoid fragmented virtio-blk transfers by copying"
changes.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Acked-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The ioapic acknowledge path translates interrupt vectors to irqs.  It
currently uses a first match algorithm, stopping when it finds the first
redirection table entry containing the vector.  That fails however if the
guest changes the irq to a different line, leaving the old redirection table
entry in place (though masked).  Result is interrupts not making it to the
guest.

Fix by always scanning the entire redirection table.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

There's a bug in the IOAPIC code for level-triggered interrupts. Its
relatively easy to trigger by sharing (virtio-blk + usbtablet was the
testcase, initially reported by Gerd von Egidy).

The "remote_irr" variable is used to indicate accepted but not yet acked
interrupts. Its cleared from the EOI handler.

Problem is that the EOI handler clears remote_irr unconditionally, even
if it reinjected another pending interrupt.

In that case, kvm_ioapic_set_irq() proceeds to ioapic_service() which
sets remote_irr even if it failed to inject (since the IRR was high due
to EOI reinjection).

Since the TMR bit has been cleared by the first EOI, the second one
fails to clear remote_irr.

End result is interrupt line dead.

Fix it by setting remote_irr only if a new pending interrupt has been
generated (and the TMR bit for vector in question set).
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Some Linux versions allow the timer interrupt to be processed by more than
one cpu, leading to hangs due to tsc instability.  Work around the issue
by only disaptching the interrupt to vcpu 0.

Problem analyzed (and patch tested) by Sheng Yang.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Move ioapic code to common, since IA64 also needs it.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This allows reuse of ioapic in ia64.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This paves the way for multiple architecture support.  Note that while
ioapic.c could potentially be shared with ia64, it is also moved.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patches moves two fields vpid and vioapic to kvm_arch
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Move all the architecture-specific fields in kvm_vcpu into a new struct
kvm_vcpu_arch.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

iosapic supports an additional mmio EOI register compared to ioapic.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Change
  dest_Loest_Prio -> IOAPIC_LOWEST_PRIORITY
  dest_Fixed -> IOAPIC_FIXED

the original names are x86 specific, while the ioapic code will be reused
for ia64.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch replaces lapic structure with kvm_vcpu in ioapic.c, making ioapic
independent of the local apic, as required by ia64.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

First step to split kvm_vcpu.  Currently, we just use an macro to define
the common fields in kvm_vcpu for all archs, and all archs need to define
its own kvm_vcpu struct.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Add new-line at end of debug strings.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>