- 12 5月, 2010 9 次提交
-
-
由 Nicolas Ferre 提交于
The removing of an SD card in certain circumstances can lead to a kernel oops if we do not make sure that the "data" field of the host structure is valid. This patch adds a test in atmci_dma_cleanup() function and also calls atmci_stop_dma() before throwing away the reference to data. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: <linux-mmc@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nicolas Ferre 提交于
Two parameters were swapped in the calls to atmci_init_slot(). Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Reported-by: NAnders Grahn <anders.grahn@hd-wireless.se> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: <linux-mmc@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
Originally, commit d899bf7b ("procfs: provide stack information for threads") attempted to introduce a new feature for showing where the threadstack was located and how many pages are being utilized by the stack. Commit c44972f1 ("procfs: disable per-task stack usage on NOMMU") was applied to fix the NO_MMU case. Commit 89240ba0 ("x86, fs: Fix x86 procfs stack information for threads on 64-bit") was applied to fix a bug in ia32 executables being loaded. Commit 9ebd4eba ("procfs: fix /proc/<pid>/stat stack pointer for kernel threads") was applied to fix a bug which had kernel threads printing a userland stack address. Commit 1306d603 ('proc: partially revert "procfs: provide stack information for threads"') was then applied to revert the stack pages being used to solve a significant performance regression. This patch nearly undoes the effect of all these patches. The reason for reverting these is it provides an unusable value in field 28. For x86_64, a fork will result in the task->stack_start value being updated to the current user top of stack and not the stack start address. This unpredictability of the stack_start value makes it worthless. That includes the intended use of showing how much stack space a thread has. Other architectures will get different values. As an example, ia64 gets 0. The do_fork() and copy_process() functions appear to treat the stack_start and stack_size parameters as architecture specific. I only partially reverted c44972f1 ("procfs: disable per-task stack usage on NOMMU") . If I had completely reverted it, I would have had to change mm/Makefile only build pagewalk.o when CONFIG_PROC_PAGE_MONITOR is configured. Since I could not test the builds without significant effort, I decided to not change mm/Makefile. I only partially reverted 89240ba0 ("x86, fs: Fix x86 procfs stack information for threads on 64-bit") . I left the KSTK_ESP() change in place as that seemed worthwhile. Signed-off-by: NRobin Holt <holt@sgi.com> Cc: Stefani Seibold <stefani@seibold.net> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Denis Turischev 提交于
The SIO chip contains 16 possible gpio lines, not 14. The schematic was not read carefully. Signed-off-by: NDenis Turischev <denis@compulab.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
dma_sync_single_range_for_cpu() and dma_sync_single_range_for_device() use a wrong address with a partial synchronization. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: Fix 3 regressions - since buffer rework
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Fix FDDI and TR config checks in ipv4 arp and LLC. IPv4: unresolved multicast route cleanup mac80211: remove association work when processing deauth request ar9170: wait for asynchronous firmware loading ipv4: udp: fix short packet and bad checksum logging phy: Fix initialization in micrel driver. sctp: Fix a race between ICMP protocol unreachable and connect() veth: Dont kfree_skb() after dev_forward_skb() IPv6: fix IPV6_RECVERR handling of locally-generated errors net/gianfar: drop recycled skbs on MTU change iwlwifi: work around passive scan issue
-
由 David Howells 提交于
Fix an occasional EIO returned by a call to vfs_unlink(): [ 4868.465413] CacheFiles: I/O Error: Unlink failed [ 4868.465444] FS-Cache: Cache cachefiles stopped due to I/O error [ 4947.320011] CacheFiles: File cache on md3 unregistering [ 4947.320041] FS-Cache: Withdrawing cache "mycache" [ 5127.348683] FS-Cache: Cache "mycache" added (type cachefiles) [ 5127.348716] CacheFiles: File cache on md3 registered [ 7076.871081] CacheFiles: I/O Error: Unlink failed [ 7076.871130] FS-Cache: Cache cachefiles stopped due to I/O error [ 7116.780891] CacheFiles: File cache on md3 unregistering [ 7116.780937] FS-Cache: Withdrawing cache "mycache" [ 7296.813394] FS-Cache: Cache "mycache" added (type cachefiles) [ 7296.813432] CacheFiles: File cache on md3 registered What happens is this: (1) A cached NFS file is seen to have become out of date, so NFS retires the object and immediately acquires a new object with the same key. (2) Retirement of the old object is done asynchronously - so the lookup/create to generate the new object may be done first. This can be a problem as the old object and the new object must exist at the same point in the backing filesystem (i.e. they must have the same pathname). (3) The lookup for the new object sees that a backing file already exists, checks to see whether it is valid and sees that it isn't. It then deletes that file and creates a new one on disk. (4) The retirement phase for the old file is then performed. It tries to delete the dentry it has, but ext4_unlink() returns -EIO because the inode attached to that dentry no longer matches the inode number associated with the filename in the parent directory. The trace below shows this quite well. [md5sum] ==> __fscache_relinquish_cookie(ffff88002d12fb58{NFS.fh,ffff88002ce62100},1) [md5sum] ==> __fscache_acquire_cookie({NFS.server},{NFS.fh},ffff88002ce62100) NFS has retired the old cookie and asked for a new one. [kslowd] ==> fscache_object_state_machine({OBJ52,OBJECT_ACTIVE,24}) [kslowd] <== fscache_object_state_machine() [->OBJECT_DYING] [kslowd] ==> fscache_object_state_machine({OBJ53,OBJECT_INIT,0}) [kslowd] <== fscache_object_state_machine() [->OBJECT_LOOKING_UP] [kslowd] ==> fscache_object_state_machine({OBJ52,OBJECT_DYING,24}) [kslowd] <== fscache_object_state_machine() [->OBJECT_RECYCLING] The old object (OBJ52) is going through the terminal states to get rid of it, whilst the new object - (OBJ53) - is coming into being. [kslowd] ==> fscache_object_state_machine({OBJ53,OBJECT_LOOKING_UP,0}) [kslowd] ==> cachefiles_walk_to_object({ffff88003029d8b8},OBJ53,@68,) [kslowd] lookup '@68' [kslowd] next -> ffff88002ce41bd0 positive [kslowd] advance [kslowd] lookup 'Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA' [kslowd] next -> ffff8800369faac8 positive The new object has looked up the subdir in which the file would be in (getting dentry ffff88002ce41bd0) and then looked up the file itself (getting dentry ffff8800369faac8). [kslowd] validate 'Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA' [kslowd] ==> cachefiles_bury_object(,'@68','Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA') [kslowd] remove ffff8800369faac8 from ffff88002ce41bd0 [kslowd] unlink stale object [kslowd] <== cachefiles_bury_object() = 0 It then checks the file's xattrs to see if it's valid. NFS says that the auxiliary data indicate the file is out of date (obvious to us - that's why NFS ditched the old version and got a new one). CacheFiles then deletes the old file (dentry ffff8800369faac8). [kslowd] redo lookup [kslowd] lookup 'Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA' [kslowd] next -> ffff88002cd94288 negative [kslowd] create -> ffff88002cd94288{ffff88002cdaf238{ino=148247}} CacheFiles then redoes the lookup and gets a negative result in a new dentry (ffff88002cd94288) which it then creates a file for. [kslowd] ==> cachefiles_mark_object_active(,OBJ53) [kslowd] <== cachefiles_mark_object_active() = 0 [kslowd] === OBTAINED_OBJECT === [kslowd] <== cachefiles_walk_to_object() = 0 [148247] [kslowd] <== fscache_object_state_machine() [->OBJECT_AVAILABLE] The new object is then marked active and the state machine moves to the available state - at which point NFS can start filling the object. [kslowd] ==> fscache_object_state_machine({OBJ52,OBJECT_RECYCLING,20}) [kslowd] ==> fscache_release_object() [kslowd] ==> cachefiles_drop_object({OBJ52,2}) [kslowd] ==> cachefiles_delete_object(,OBJ52{ffff8800369faac8}) The old object, meanwhile, goes on with being retired. If allocation occurs first, cachefiles_delete_object() has to wait for dir->d_inode->i_mutex to become available before it can continue. [kslowd] ==> cachefiles_bury_object(,'@68','Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA') [kslowd] remove ffff8800369faac8 from ffff88002ce41bd0 [kslowd] unlink stale object EXT4-fs warning (device sda6): ext4_unlink: Inode number mismatch in unlink (148247!=148193) CacheFiles: I/O Error: Unlink failed FS-Cache: Cache cachefiles stopped due to I/O error CacheFiles then tries to delete the file for the old object, but the dentry it has (ffff8800369faac8) no longer points to a valid inode for that directory entry, and so ext4_unlink() returns -EIO when de->inode does not match i_ino. [kslowd] <== cachefiles_bury_object() = -5 [kslowd] <== cachefiles_delete_object() = -5 [kslowd] <== fscache_object_state_machine() [->OBJECT_DEAD] [kslowd] ==> fscache_object_state_machine({OBJ53,OBJECT_AVAILABLE,0}) [kslowd] <== fscache_object_state_machine() [->OBJECT_ACTIVE] (Note that the above trace includes extra information beyond that produced by the upstream code). The fix is to note when an object that is being retired has had its object deleted preemptively by a replacement object that is being created, and to skip the second removal attempt in such a case. Reported-by: NGreg M <gregm@servu.net.au> Reported-by: NMark Moseley <moseleymark@gmail.com> Reported-by: NRomain DEGEZ <romain.degez@smartjog.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Chiang 提交于
Duplicate entries ended up acpisleep_dmi_table[] by accident. They don't hurt functionality, but they are ugly, so let's get rid of them. Cc: stable@kernel.org Signed-off-by: NAlex Chiang <achiang@canonical.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 5月, 2010 5 次提交
-
-
由 Jean Delvare 提交于
Commit b4fe9454 introduced 3 bugs, fix them: * Use the right command dword for second packet offset in RADEON_CNTL_PAINT/BITBLT_MULTI. * Don't leak memory if drm_buffer_copy_from_user() fails. * Don't call drm_buffer_unprocessed() unless drm_buffer_alloc() and drm_buffer_copy_from_user() have been called successfully first. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Pauli Nieminen <suokkos@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Revert "ALSA: hda/realtek: quirk for D945GCLF2 mainboard" ALSA: hda - add support for Lenovo ThinkPad X100e in conexant codec ALSA: hda - fix DG45ID SPDIF output
-
由 Ian Kent 提交于
After commit 1f36f774 ("Switch !O_CREAT case to use of do_last()") in 2.6.34-rc1 autofs direct mounts stopped working. This is caused by current->link_count being 0 when ->follow_link() is called from do_filp_open(). I can't work out why this hasn't been seen before Als patch series. This patch removes the autofs dependence on current->link_count. Signed-off-by: NIan Kent <raven@themaw.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix suspend crash by moving initializations earlier HID: sony: fix sony_set_operational_bt HID: ntrig: Remove unused macro, TripleTap and QuadTap HID: ntrig: TipSwitch for single touch mode touch. HID: hidraw: fix numbered reports HID: wacom: remove annoying non-error printk HID: ntrig: Emit TOUCH with DOUBLETAP for single touch HID: add support for cymotion master solar keyboard HID: ntrig: explain firmware quirk HID: fix N-trig touch panel with recent firmware
- 10 5月, 2010 7 次提交
-
-
由 Stefan Lippers-Hollmann 提交于
This reverts commit 7aee6746. As it doesn't seem to be universally valid for all mainboard revisions of the D945GCLF2 and breaks snd-hda-intel/ snd-hda-codec-realtek on the Intel Corporation "D945GCLF2" (LF94510J.86A.0229.2009.0729.0209) mainboard. 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) Signed-off-by: NStefan Lippers-Hollmann <s.l-h@gmx.de> Cc: <stable@kernel.org> [2.6.33] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David S. Miller 提交于
Need to check both CONFIG_FOO and CONFIG_FOO_MODULE Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Meissner 提交于
Fixes the expiration timer for unresolved multicast route entries. In case new multicast routing requests come in faster than the expiration timeout occurs (e.g. zap through multicast TV streams), the timer is prevented from being called at time for already existing entries. As the single timer is resetted to default whenever a new entry is made, the timeout for existing unresolved entires are missed and/or not updated. As a consequence new requests are denied when the limit of unresolved entries has been reached because old entries live longer than they are supposed to. The solution is to reset the timer only for the first unresolved entry in the multicast routing cache. All other timers are already set and updated correctly within the timer function itself by now. Signed-off by: Andreas Meissner <andreas.meissner@sphairon.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrej Gelenberg 提交于
Ideapad quirks working for my ThinkPad X100e (microphone is not tested). Signed-off-by: NAndrej Gelenberg <andrej.gelenberg@udo.edu> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] Retry commands with UNIT_ATTENTION sense codes to fix ext3/ext4 I/O error [SCSI] Enable retries for SYNCRONIZE_CACHE commands to fix I/O error [SCSI] scsi_debug: virtual_gb ignores sector_size [SCSI] libiscsi: regression: fix header digest errors [SCSI] fix locking around blk_abort_request() [SCSI] advansys: fix narrow board error path
-
由 Arjan van de Ven 提交于
commit 672917dc ("cpuidle: menu governor: reduce latency on exit") added an optimization, where the analysis on the past idle period moved from the end of idle, to the beginning of the new idle. Unfortunately, this optimization had a bug where it zeroed one key variable for new use, that is needed for the analysis. The fix is simple, zero the variable after doing the work from the previous idle. During the audit of the code that found this issue, another issue was also found; the ->measured_us data structure member is never set, a local variable is always used instead. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Cc: Corrado Zoccolo <czoccolo@gmail.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 5月, 2010 12 次提交
-
-
由 Alan Stern 提交于
Although the usbhid driver allocates its usbhid structure in the probe routine, several critical fields in that structure don't get initialized until usbhid_start(). However if report descriptor parsing fails then usbhid_start() is never called. This leads to problems during system suspend -- the system will freeze. This patch (as1378) fixes the bug by moving the initialization statements up into usbhid_probe(). Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Reported-by: NBruno Prémont <bonbons@linux-vserver.org> Tested-By: NBruno Prémont <bonbons@linux-vserver.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md: restore ability of spare drives to spin down. md/raid6: Fix raid-6 read-error correction in degraded state
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6由 Linus Torvalds 提交于
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix compilation after 16bit state locking changes pcmcia: order userspace suspend and resume requests pcmcia: avoid pccard_validate_cis failure in resume callpath
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: blk-cgroup: Fix an RCU warning in blkiocg_create() blk-cgroup: Fix RCU correctness warning in cfq_init_queue() drbd: don't expose failed local READ to upper layers
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/ttm: Remove the ttm_bo_block_reservation() function. drm/ttm: Remove some leftover debug messages. drm/radeon: async event synchronization for drmWaitVblank
-
由 Stijn Tintel 提交于
Move initialization of the virtio framework before the initialization of mtd, so that block2mtd can be used on virtio-based block devices. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15644Signed-off-by: NStijn Tintel <stijn@linux-ipv6.be> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Fix RCU issues in the NFSv4 delegation code NFSv4: Fix the locking in nfs_inode_reclaim_delegation()
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: sleep: init_set_sci_en_on_resume for Dell Studio 155x ACPI: fix acpi_hest_firmware_first_pci() caused oops sbshc: acpi_device_class "smbus_host_controller" too long power_meter: acpi_device_class "power_meter_resource" too long acpi_pad: "processor_aggregator" name too long PNP: don't check for conflicts with bridge windows ACPI: DMI init_set_sci_en_on_resume for multiple Lenovo ThinkPads PNPACPI: compute Address Space length rather than using _LEN ACPI: silence kmemcheck false positive
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'v4l_for_2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: pxa_camera: move fifo reset direct before dma start V4L/DVB: video: testing unsigned for less than 0 V4L/DVB: mx1-camera: compile fix V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer dereference" V4L/DVB: ngene: Workaround for stuck DiSEqC pin V4L/DVB: saa7146: fix regression of the av7110/budget-av driver V4L/DVB: v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1 V4L/DVB: feature-removal: announce videotext.h removal V4L/DVB: V4L - vpfe capture - fix for kernel crash V4L/DVB: gspca: make usb id 0461:0815 get handled by the right driver V4L/DVB: gspca - stv06xx: Remove the 046d:08da from the stv06xx driver V4L/DVB: gspca - sn9c20x: Correct onstack wait_queue_head declaration V4L/DVB: saa7146: fix up bytesperline if it is an impossible value V4L/DVB: V4L: vpfe_capture - free ccdc_lock when memory allocation fails V4L/DVB: V4L - Makfile:Removed duplicate entry of davinci V4L/DVB: omap24xxcam: potential buffer overflow
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: create rcu_my_thread_group_empty() wrapper memcg: css_id() must be called under rcu_read_lock() cgroup: Check task_lock in task_subsys_state() sched: Fix an RCU warning in print_task() cgroup: Fix an RCU warning in alloc_css_id() cgroup: Fix an RCU warning in cgroup_path() KEYS: Fix an RCU warning in the reading of user keys KEYS: Fix an RCU warning
-
由 Reinette Chatre 提交于
In https://bugzilla.kernel.org/show_bug.cgi?id=15794 a user encountered the following: [18967.469098] wlan0: authenticated [18967.472527] wlan0: associate with 00:1c:10:b8:e3:ea (try 1) [18967.472585] wlan0: deauthenticating from 00:1c:10:b8:e3:ea by local choice (reason=3) [18967.672057] wlan0: associate with 00:1c:10:b8:e3:ea (try 2) [18967.872357] wlan0: associate with 00:1c:10:b8:e3:ea (try 3) [18968.072960] wlan0: association with 00:1c:10:b8:e3:ea timed out [18968.076890] ------------[ cut here ]------------ [18968.076898] WARNING: at net/wireless/mlme.c:341 cfg80211_send_assoc_timeout+0xa8/0x140() [18968.076900] Hardware name: GX628 [18968.076924] Pid: 1408, comm: phy0 Not tainted 2.6.34-rc4-00082-g250541fc-dirty #3 [18968.076926] Call Trace: [18968.076931] [<ffffffff8103459e>] ? warn_slowpath_common+0x6e/0xb0 [18968.076934] [<ffffffff8157c2d8>] ? cfg80211_send_assoc_timeout+0xa8/0x140 [18968.076937] [<ffffffff8103ff8b>] ? mod_timer+0x10b/0x180 [18968.076940] [<ffffffff8158f0fc>] ? ieee80211_assoc_done+0xbc/0xc0 [18968.076943] [<ffffffff81590d53>] ? ieee80211_work_work+0x553/0x11c0 [18968.076945] [<ffffffff8102d931>] ? finish_task_switch+0x41/0xb0 [18968.076948] [<ffffffff81590800>] ? ieee80211_work_work+0x0/0x11c0 [18968.076951] [<ffffffff810476fb>] ? worker_thread+0x13b/0x210 [18968.076954] [<ffffffff8104b6b0>] ? autoremove_wake_function+0x0/0x30 [18968.076956] [<ffffffff810475c0>] ? worker_thread+0x0/0x210 [18968.076959] [<ffffffff8104b21e>] ? kthread+0x8e/0xa0 [18968.076962] [<ffffffff810031f4>] ? kernel_thread_helper+0x4/0x10 [18968.076964] [<ffffffff8104b190>] ? kthread+0x0/0xa0 [18968.076966] [<ffffffff810031f0>] ? kernel_thread_helper+0x0/0x10 [18968.076968] ---[ end trace 8aa6265f4b1adfe0 ]--- As explained by Johannes Berg <johannes@sipsolutions.net>: We authenticate successfully, and then userspace requests association. Then we start that process, but the AP doesn't respond. While we're still waiting for an AP response, userspace asks for a deauth. We do the deauth, but don't abort the association work. Then once the association work times out we tell cfg80211, but it no longer wants to know since for all it is concerned we accepted the deauth that also kills the association attempt. Fix this by, upon receipt of deauth request, removing the association work and continuing to send the deauth. Unfortunately the user reporting the issue is not able to reproduce this problem anymore and cannot verify this fix. This seems like a well understood issue though and I thus present the patch. Bug-identified-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch fixes a regression introduced by the following patch: "ar9170: load firmware asynchronously" When we kick off a firmware loading request and then unbind, or disconnect the usb device right away, we get into trouble: > ------------[ cut here ]------------ > WARNING: at lib/kref.c:44 kref_get+0x1c/0x20() > Hardware name: 18666GU > Modules linked in: ar9170usb [...] > Pid: 6588, comm: firmware/ar9170 Not tainted 2.6.34-rc5-wl #43 > Call Trace: > [<c102b05e>] ? warn_slowpath_common+0x6e/0xb0 > [<c117c93c>] ? kref_get+0x1c/0x20 > [<c102b0b3>] ? warn_slowpath_null+0x13/0x20 > [<c117c93c>] ? kref_get+0x1c/0x20 > [<c117bb2f>] ? kobject_get+0xf/0x20 > [<c124d630>] ? get_device+0x10/0x20 > [<c124e5a0>] ? device_add+0x60/0x530 > [<c117b8b5>] ? kobject_init+0x25/0xa0 > [<c12569f9>] ? _request_firmware+0x139/0x3e0 > [<c1256cc0>] ? request_firmware_work_func+0x20/0x70 > [<c1256ca0>] ? request_firmware_work_func+0x0/0x70 > [<c103ff24>] ? kthread+0x74/0x80 > [<c103feb0>] ? kthread+0x0/0x80 > [<c1003136>] ? kernel_thread_helper+0x6/0x10 >---[ end trace 2d50bd818f64a1b7 ]--- - followed by a random Oops - Avoid that by waiting for the firmware loading to finish (whether successfully or not) before the unbind in ar9170_usb_disconnect. Reported-by: NJohannes Berg <johannes@sipsolutions.net> Bug-fixed-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 07 5月, 2010 7 次提交
-
-
由 NeilBrown 提交于
Some time ago we stopped the clean/active metadata updates from being written to a 'spare' device in most cases so that it could spin down and say spun down. Device failure/removal etc are still recorded on spares. However commit 51d5668c broke this 50% of the time, depending on whether the event count is even or odd. The change log entry said: This means that the alignment between 'odd/even' and 'clean/dirty' might take a little longer to attain, how ever the code makes no attempt to create that alignment, so it could take arbitrarily long. So when we find that clean/dirty is not aligned with odd/even, force a second metadata-update immediately. There are already cases where a second metadata-update is needed immediately (e.g. when a device fails during the metadata update). We just piggy-back on that. Reported-by: NJoe Bryant <tenminjoe@yahoo.com> Signed-off-by: NNeilBrown <neilb@suse.de> Cc: stable@kernel.org
-
由 Gabriele A. Trombetti 提交于
Fix: Raid-6 was not trying to correct a read-error when in singly-degraded state and was instead dropping one more device, going to doubly-degraded state. This patch fixes this behaviour. Tested-by: NJanos Haar <janos.haar@netcenter.hu> Signed-off-by: NGabriele A. Trombetti <g.trombetti.lkrnl1213@logicschema.com> Reported-by: NJanos Haar <janos.haar@netcenter.hu> Signed-off-by: NNeilBrown <neilb@suse.de> Cc: stable@kernel.org
-
由 Wu Fengguang 提交于
This reverts part of commit 52dc4386, in order to fix a regression: broken SPDIF output on Intel DG45FC motherboard (IDT 92HD73E1X5 codec). --- DG45FC-IDT-codec-2.6.32 (SPDIF OK) +++ DG45FC-IDT-codec-2.6.33 (SPDIF broken) Node 0x22 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT - Pin Default 0x40f000f0: [N/A] Other at Ext N/A - Conn = Unknown, Color = Unknown - DefAssociation = 0xf, Sequence = 0x0 - Pin-ctls: 0x00: + Pin Default 0x014510a0: [Jack] SPDIF Out at Ext Rear + Conn = Optical, Color = Black + DefAssociation = 0xa, Sequence = 0x0 + Pin-ctls: 0x40: OUT Connection: 3 0x25* 0x20 0x21 Node 0x23 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT - Pin Default 0x01451140: [Jack] SPDIF Out at Ext Rear + Pin Default 0x074510b0: [Jack] SPDIF Out at Ext Rear Panel Conn = Optical, Color = Black - DefAssociation = 0x4, Sequence = 0x0 - Misc = NO_PRESENCE - Pin-ctls: 0x40: OUT + DefAssociation = 0xb, Sequence = 0x0 + Pin-ctls: 0x00: Connection: 3 0x26* 0x20 0x21 Cc: <stable@kernel.org> Cc: Alexey Fisher <bug-track@fisher-privat.net> Tested-by: NDavid Härdeman <david@hardeman.nu> Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Li Zefan 提交于
with CONFIG_PROVE_RCU=y, a warning can be triggered: # mount -t cgroup -o blkio xxx /mnt # mkdir /mnt/subgroup ... kernel/cgroup.c:4442 invoked rcu_dereference_check() without protection! ... To fix this, we avoid caling css_depth() here, which is a bit simpler than the original code. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Bjørn Mork 提交于
commit 2783ef23 moved the initialisation of saddr and daddr after pskb_may_pull() to avoid a potential data corruption. Unfortunately also placing it after the short packet and bad checksum error paths, where these variables are used for logging. The result is bogus output like [92238.389505] UDP: short packet: From 2.0.0.0:65535 23715/178 to 0.0.0.0:65535 Moving the saddr and daddr initialisation above the error paths, while still keeping it after the pskb_may_pull() to keep the fix from commit 2783ef23. Signed-off-by: NBjørn Mork <bjorn@mork.no> Cc: stable@kernel.org Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Len Brown 提交于
Merge branches 'bugzilla-14337', 'bugzilla-14998', 'bugzilla-15407', 'bugzilla-15903' and 'misc-2.6.34' into release
-
由 Thomas Hellstrom 提交于
It's unused and buggy in its current form, since it can place a bo in the reserved state without removing it from lru lists. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-