- 25 4月, 2017 2 次提交
-
-
由 Jisheng Zhang 提交于
sdhci_pltfm_init() has already set the platform drvdata for us, remove the unnecessary platform_set_drvdata() call. Signed-off-by: NJisheng Zhang <jszhang@marvell.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
由 Alexey Khoroshilov 提交于
There is no check if clk_prepare_enable() succeed in sdhci_pxav2_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: NAdrian Hunter <adrian.hunter@intel.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
- 29 7月, 2016 1 次提交
-
-
由 Ulf Hansson 提交于
Due to previous changes this define has no longer a purpose. Instead move the sdhci-pltfm drivers over to use the exported struct sdhci_pltfm_pmops. Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
- 29 2月, 2016 1 次提交
-
-
由 Jisheng Zhang 提交于
The sdhci_pltfm_init() function has initialized the priv member as NULL, so there's no need to do it again. Signed-off-by: NJisheng Zhang <jszhang@marvell.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NAdrian Hunter <adrian.hunter@intel.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
- 01 6月, 2015 1 次提交
-
-
由 Axel Lin 提交于
This eliminates having an #ifdef returning NULL for the case when OF is disabled. Signed-off-by: NAxel Lin <axel.lin@ingics.com> Acked-by: NJisheng Zhang <jszhang@marvell.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
- 10 11月, 2014 1 次提交
-
-
由 Sebastian Hesselbarth 提交于
struct sdhci_pxa is private data of PXA SDHCI driver, but not used in sdhci-pxav2 at all. Drop unused references to struct sdhci_pxa. Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
- 09 9月, 2014 1 次提交
-
-
由 Peter Griffin 提交于
This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway. Signed-off-by: NPeter Griffin <peter.griffin@linaro.org> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
- 22 5月, 2014 4 次提交
-
-
由 Russell King 提交于
Add sdhci_set_uhs_signaling() and always call the set_uhs_signaling method. This avoids quirks being added into sdhci_set_uhs_signaling(). Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Tested-by: NMarkus Pargmann <mpa@pengutronix.de> Tested-by: NStephen Warren <swarren@nvidia.com> [Ulf Hansson] Resolved conflict Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Tested-by: NMarkus Pargmann <mpa@pengutronix.de> Tested-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Russell King 提交于
Rather than having platform_reset_enter/platform_reset_exit methods, turn the core of the reset handling into a library function which platforms can call at the appropriate moment in their (new) reset method. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Tested-by: NMarkus Pargmann <mpa@pengutronix.de> Tested-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Tested-by: NMarkus Pargmann <mpa@pengutronix.de> Tested-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NChris Ball <chris@printf.net>
-
- 31 5月, 2013 1 次提交
-
-
由 Christian Daudt 提交于
Add a param to allow users of sdhci_pltfm to allocate private space in calls to sdhci_pltfm_init+sdhci_pltfm_register. This is implemented in the same way as sdhci does for its users. None of the users have been migrated yet and are passing in zero to retain their private allocation. - todo: migrate clients to using allocation this way - todo: remove priv variable once migration is complete Also removed unused variable in sdhci_pltfm_init fn Signed-off-by: NChristian Daudt <csd@broadcom.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 27 5月, 2013 1 次提交
-
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Acked-by: NSonic Zhang <sonic.zhang@analog.com> Acked-by: NSeungwon Jeon <tgih.jun@samsung.com> Acked-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com> Acked-by: NJaehoon Chung <jh80.chung@samsung.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NTony Prisk <linux@prisktech.co.nz> Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 23 3月, 2013 1 次提交
-
-
由 Lars-Peter Clausen 提交于
Basically all drivers can have sdhci_ops struct const, but almost none do. This patch constifies all sdhci_ops struct declarations where possible. The patch was auto-generated with the following coccinelle semantic patch: // <smpl> @r1@ identifier ops; identifier fld; @@ ops.fld = ...; @disable optional_qualifier@ identifier ops != r1.ops; @@ static +const struct sdhci_ops ops = { ... }; // </smpl> Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 25 2月, 2013 2 次提交
-
-
由 Lars-Peter Clausen 提交于
Quite a few drivers have a implementation of the get_timeout_clock callback which simply returns the result of clk_get_rate on the device's clock. This patch adds a common implementation of this to the sdhci-pltfm module and replaces all custom implementations with the common one. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Tested-by: NStephen Warren <swarren@wwwdotorg.org> Acked-by: NShawn Guo <shawn.guo@linaro.org> Tested-by: NKevin Liu <kliu5@marvell.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Sascha Hauer 提交于
The 8bit in the function name is misleading. When set, it will be used to set the bus width, regardless of whether 8bit or another bus width is requested, so change the function name to platform_bus_width. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Tested-by: NDirk Behme <dirk.behme@de.bosch.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 29 11月, 2012 3 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Chris Ball <cjb@laptop.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: NLudovic Desroches <ludovic.desroches@atmel.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Chris Ball <cjb@laptop.org> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 05 9月, 2012 1 次提交
-
-
由 Chao Xie 提交于
Prepare the clock before enabling it. Signed-off-by: NChao Xie <xiechao.mail@gmail.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 21 7月, 2012 1 次提交
-
-
由 Chris Ball 提交于
Tested on an OLPC XO-1.75. (MMP2, sdhci-pxav3, CONFIG_MACH_MMP2_DT=y) Signed-off-by: NChris Ball <cjb@laptop.org> Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
-
- 12 1月, 2012 1 次提交
-
-
由 Axel Lin 提交于
This patch converts the drivers in drivers/mmc/host/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: N"Michał Mirosław" <mirq-linux@rere.qmqm.pl> Acked-by: NDavid Brown <davidb@codeaurora.org> Acked-by: NViresh Kumar <viresh.kumar@st.com> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NAnton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 20 12月, 2011 1 次提交
-
-
由 Manuel Lauss 提交于
Drop the "state" argument from sdhci_suspend_host. Its only user is the PCI glue; this allows to move all SDHCI glues to use dev_pm_ops instead. Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com> Acked-by: NAdrian Hunter <adrian.hunter@intel.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 27 10月, 2011 2 次提交
-
-
由 Paul Gortmaker 提交于
We are cleaning up the implicit presence of module.h; these guys are some of the people who just assume it will be there. Call it out explitly for those that really need it. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Tanmay Upadhyay 提交于
Signed-off-by: NTanmay Upadhyay <tanmay.upadhyay@einfochips.com> Acked-by: NZhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 21 7月, 2011 2 次提交
-
-
由 Zhangfei Gao 提交于
As suggested by Arnd, move platform data to include/linux/platform_data in order to improve build coverage for the driver. Signed-off-by: NZhangfei Gao <zhangfei.gao@marvell.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Zhangfei Gao 提交于
sdhci-pltfm driver for PXAV2 SoCs, such as pxa910. Signed-off-by: NZhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: NJun Nie <njun@marvell.com> Signed-off-by: NQiming Wu <wuqm@marvell.com> Acked-by: NPhilip Rakity <prakity@marvell.com> Acked-by: NMark F. Brown <mark.brown314@gmail.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-