This patch adds the End.BPF action to the LWT seg6local infrastructure.
This action works like any other seg6local End action, meaning that an IPv6
header with SRH is needed, whose DA has to be equal to the SID of the
action. It will also advance the SRH to the next segment, the BPF program
does not have to take care of this.

Since the BPF program may not be a source of instability in the kernel, it
is important to ensure that the integrity of the packet is maintained
before yielding it back to the IPv6 layer. The hook hence keeps track if
the SRH has been altered through the helpers, and re-validates its
content if needed with seg6_validate_srh. The state kept for validation is
stored in a per-CPU buffer. The BPF program is not allowed to directly
write into the packet, and only some fields of the SRH can be altered
through the helper bpf_lwt_seg6_store_bytes.

Performances profiling has shown that the SRH re-validation does not induce
a significant overhead. If the altered SRH is deemed as invalid, the packet
is dropped.

This validation is also done before executing any action through
bpf_lwt_seg6_action, and will not be performed again if the SRH is not
modified after calling the action.

The BPF program may return 3 types of return codes:
    - BPF_OK: the End.BPF action will look up the next destination through
             seg6_lookup_nexthop.
    - BPF_REDIRECT: if an action has been executed through the
          bpf_lwt_seg6_action helper, the BPF program should return this
          value, as the skb's destination is already set and the default
          lookup should not be performed.
    - BPF_DROP : the packet will be dropped.
Signed-off-by: NMathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: NDavid Lebrun <dlebrun@google.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

The new bpf_lwt_push_encap helper should only be accessible within the
LWT BPF IN hook, and not the OUT one, as this may lead to a skb under
panic.

At the moment, both LWT BPF IN and OUT share the same list of helpers,
whose calls are authorized by the verifier. This patch separates the
verifier ops for the IN and OUT hooks, and allows the IN hook to call the
bpf_lwt_push_encap helper.

This patch is also the occasion to put all lwt_*_func_proto functions
together for clarity. At the moment, socks_op_func_proto is in the middle
of lwt_inout_func_proto and lwt_xmit_func_proto.
Signed-off-by: NMathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: NDavid Lebrun <dlebrun@google.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

The BPF seg6local hook should be powerful enough to enable users to
implement most of the use-cases one could think of. After some thinking,
we figured out that the following actions should be possible on a SRv6
packet, requiring 3 specific helpers :
    - bpf_lwt_seg6_store_bytes: Modify non-sensitive fields of the SRH
    - bpf_lwt_seg6_adjust_srh: Allow to grow or shrink a SRH
                               (to add/delete TLVs)
    - bpf_lwt_seg6_action: Apply some SRv6 network programming actions
                           (specifically End.X, End.T, End.B6 and
                            End.B6.Encap)

The specifications of these helpers are provided in the patch (see
include/uapi/linux/bpf.h).

The non-sensitive fields of the SRH are the following : flags, tag and
TLVs. The other fields can not be modified, to maintain the SRH
integrity. Flags, tag and TLVs can easily be modified as their validity
can be checked afterwards via seg6_validate_srh. It is not allowed to
modify the segments directly. If one wants to add segments on the path,
he should stack a new SRH using the End.B6 action via
bpf_lwt_seg6_action.

Growing, shrinking or editing TLVs via the helpers will flag the SRH as
invalid, and it will have to be re-validated before re-entering the IPv6
layer. This flag is stored in a per-CPU buffer, along with the current
header length in bytes.

Storing the SRH len in bytes in the control block is mandatory when using
bpf_lwt_seg6_adjust_srh. The Header Ext. Length field contains the SRH
len rounded to 8 bytes (a padding TLV can be inserted to ensure the 8-bytes
boundary). When adding/deleting TLVs within the BPF program, the SRH may
temporary be in an invalid state where its length cannot be rounded to 8
bytes without remainder, hence the need to store the length in bytes
separately. The caller of the BPF program can then ensure that the SRH's
final length is valid using this value. Again, a final SRH modified by a
BPF program which doesn’t respect the 8-bytes boundary will be discarded
as it will be considered as invalid.

Finally, a fourth helper is provided, bpf_lwt_push_encap, which is
available from the LWT BPF IN hook, but not from the seg6local BPF one.
This helper allows to encapsulate a Segment Routing Header (either with
a new outer IPv6 header, or by inlining it directly in the existing IPv6
header) into a non-SRv6 packet. This helper is required if we want to
offer the possibility to dynamically encapsulate a SRH for non-SRv6 packet,
as the BPF seg6local hook only works on traffic already containing a SRH.
This is the BPF equivalent of the seg6 LWT infrastructure, which achieves
the same purpose but with a static SRH per route.

These helpers require CONFIG_IPV6=y (and not =m).
Signed-off-by: NMathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: NDavid Lebrun <dlebrun@google.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

The function lookup_nexthop is essential to implement most of the seg6local
actions. As we want to provide a BPF helper allowing to apply some of these
actions on the packet being processed, the helper should be able to call
this function, hence the need to make it public.

Moreover, if one argument is incorrect or if the next hop can not be found,
an error should be returned by the BPF helper so the BPF program can adapt
its processing of the packet (return an error, properly force the drop,
...). This patch hence makes this function return dst->error to indicate a
possible error.
Signed-off-by: NMathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: NDavid Lebrun <dlebrun@google.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

include/net/seg6.h cannot be included in a source file if CONFIG_IPV6 is
not enabled:
   include/net/seg6.h: In function 'seg6_pernet':
>> include/net/seg6.h:52:14: error: 'struct net' has no member named
                                        'ipv6'; did you mean 'ipv4'?
     return net->ipv6.seg6_data;
                 ^~~~
                 ipv4

This commit makes seg6_pernet return NULL if IPv6 is not compiled, hence
allowing seg6.h to be included regardless of the configuration.
Signed-off-by: NMathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Sandipan Das says:

====================
[1] Support for bpf-to-bpf function calls in the powerpc64 JIT compiler.

[2] Provide a way for resolving function calls because of the way JITed
    images are allocated in powerpc64.

[3] Fix to get JITed instruction dumps for multi-function programs from
    the bpf system call.

[4] Fix for bpftool to show delimited multi-function JITed image dumps.

v4:
 - Incorporate review comments from Jakub.
 - Fix JSON output for bpftool.

v3:
 - Change base tree tag to bpf-next.
 - Incorporate review comments from Alexei, Daniel and Jakub.
 - Make sure that the JITed image does not grow or shrink after
   the last pass due to the way the instruction sequence used
   to load a callee's address maybe optimized.
 - Make additional changes to the bpf system call and bpftool to
   make multi-function JITed dumps easier to correlate.

v2:
 - Incorporate review comments from Jakub.
====================
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This splits up the contiguous JITed dump obtained via the bpf
system call into more relatable chunks for each function in
the program. If the kernel symbols corresponding to these are
known, they are printed in the header for each JIT image dump
otherwise the masked start address is printed.

Before applying this patch:

  # bpftool prog dump jited id 1

     0:	push   %rbp
     1:	mov    %rsp,%rbp
  ...
    70:	leaveq
    71:	retq
    72:	push   %rbp
    73:	mov    %rsp,%rbp
  ...
    dd:	leaveq
    de:	retq

  # bpftool -p prog dump jited id 1

  [{
          "pc": "0x0",
          "operation": "push",
          "operands": ["%rbp"
          ]
      },{
  ...
      },{
          "pc": "0x71",
          "operation": "retq",
          "operands": [null
          ]
      },{
          "pc": "0x72",
          "operation": "push",
          "operands": ["%rbp"
          ]
      },{
  ...
      },{
          "pc": "0xde",
          "operation": "retq",
          "operands": [null
          ]
      }
  ]

After applying this patch:

  # echo 0 > /proc/sys/net/core/bpf_jit_kallsyms
  # bpftool prog dump jited id 1

  0xffffffffc02c7000:
     0:	push   %rbp
     1:	mov    %rsp,%rbp
  ...
    70:	leaveq
    71:	retq

  0xffffffffc02cf000:
     0:	push   %rbp
     1:	mov    %rsp,%rbp
  ...
    6b:	leaveq
    6c:	retq

  # bpftool -p prog dump jited id 1

  [{
          "name": "0xffffffffc02c7000",
          "insns": [{
                  "pc": "0x0",
                  "operation": "push",
                  "operands": ["%rbp"
                  ]
              },{
  ...
              },{
                  "pc": "0x71",
                  "operation": "retq",
                  "operands": [null
                  ]
              }
          ]
      },{
          "name": "0xffffffffc02cf000",
          "insns": [{
                  "pc": "0x0",
                  "operation": "push",
                  "operands": ["%rbp"
                  ]
              },{
  ...
              },{
                  "pc": "0x6c",
                  "operation": "retq",
                  "operands": [null
                  ]
              }
          ]
      }
  ]

  # echo 1 > /proc/sys/net/core/bpf_jit_kallsyms
  # bpftool prog dump jited id 1

  bpf_prog_b811aab41a39ad3d_foo:
     0:	push   %rbp
     1:	mov    %rsp,%rbp
  ...
    70:	leaveq
    71:	retq

  bpf_prog_cf418ac8b67bebd9_F:
     0:	push   %rbp
     1:	mov    %rsp,%rbp
  ...
    6b:	leaveq
    6c:	retq

  # bpftool -p prog dump jited id 1

  [{
          "name": "bpf_prog_b811aab41a39ad3d_foo",
          "insns": [{
                  "pc": "0x0",
                  "operation": "push",
                  "operands": ["%rbp"
                  ]
              },{
  ...
              },{
                  "pc": "0x71",
                  "operation": "retq",
                  "operands": [null
                  ]
              }
          ]
      },{
          "name": "bpf_prog_cf418ac8b67bebd9_F",
          "insns": [{
                  "pc": "0x0",
                  "operation": "push",
                  "operands": ["%rbp"
                  ]
              },{
  ...
              },{
                  "pc": "0x6c",
                  "operation": "retq",
                  "operands": [null
                  ]
              }
          ]
      }
  ]
Signed-off-by: NSandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Syncing the bpf.h uapi header with tools so that struct
bpf_prog_info has the two new fields for passing on the
JITed image lengths of each function in a multi-function
program.
Signed-off-by: NSandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This adds new two new fields to struct bpf_prog_info. For
multi-function programs, these fields can be used to pass
a list of the JITed image lengths of each function for a
given program to userspace using the bpf system call with
the BPF_OBJ_GET_INFO_BY_FD command.

This can be used by userspace applications like bpftool
to split up the contiguous JITed dump, also obtained via
the system call, into more relatable chunks corresponding
to each function.
Signed-off-by: NSandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Currently, for multi-function programs, we cannot get the JITed
instructions using the bpf system call's BPF_OBJ_GET_INFO_BY_FD
command. Because of this, userspace tools such as bpftool fail
to identify a multi-function program as being JITed or not.

With the JIT enabled and the test program running, this can be
verified as follows:

  # cat /proc/sys/net/core/bpf_jit_enable
  1

Before applying this patch:

  # bpftool prog list
  1: kprobe  name foo  tag b811aab41a39ad3d  gpl
          loaded_at 2018-05-16T11:43:38+0530  uid 0
          xlated 216B  not jited  memlock 65536B
  ...

  # bpftool prog dump jited id 1
  no instructions returned

After applying this patch:

  # bpftool prog list
  1: kprobe  name foo  tag b811aab41a39ad3d  gpl
          loaded_at 2018-05-16T12:13:01+0530  uid 0
          xlated 216B  jited 308B  memlock 65536B
  ...

  # bpftool prog dump jited id 1
     0:   nop
     4:   nop
     8:   mflr    r0
     c:   std     r0,16(r1)
    10:   stdu    r1,-112(r1)
    14:   std     r31,104(r1)
    18:   addi    r31,r1,48
    1c:   li      r3,10
  ...
Signed-off-by: NSandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Currently, we resolve the callee's address for a JITed function
call by using the imm field of the call instruction as an offset
from __bpf_call_base. If bpf_jit_kallsyms is enabled, we further
use this address to get the callee's kernel symbol's name.

For some architectures, such as powerpc64, the imm field is not
large enough to hold this offset. So, instead of assigning this
offset to the imm field, the verifier now assigns the subprog
id. Also, a list of kernel symbol addresses for all the JITed
functions is provided in the program info. We now use the imm
field as an index for this list to lookup a callee's symbol's
address and resolve its name.
Suggested-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Syncing the bpf.h uapi header with tools so that struct
bpf_prog_info has the two new fields for passing on the
addresses of the kernel symbols corresponding to each
function in a program.
Signed-off-by: NSandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This adds new two new fields to struct bpf_prog_info. For
multi-function programs, these fields can be used to pass
a list of kernel symbol addresses for all functions in a
given program to userspace using the bpf system call with
the BPF_OBJ_GET_INFO_BY_FD command.

When bpf_jit_kallsyms is enabled, we can get the address
of the corresponding kernel symbol for a callee function
and resolve the symbol's name. The address is determined
by adding the value of the call instruction's imm field
to __bpf_call_base. This offset gets assigned to the imm
field by the verifier.

For some architectures, such as powerpc64, the imm field
is not large enough to hold this offset.

We resolve this by:

[1] Assigning the subprog id to the imm field of a call
    instruction in the verifier instead of the offset of
    the callee's symbol's address from __bpf_call_base.

[2] Determining the address of a callee's corresponding
    symbol by using the imm field as an index for the
    list of kernel symbol addresses now available from
    the program info.
Suggested-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This adds support for bpf-to-bpf function calls in the powerpc64
JIT compiler. The JIT compiler converts the bpf call instructions
to native branch instructions. After a round of the usual passes,
the start addresses of the JITed images for the callee functions
are known. Finally, to fixup the branch target addresses, we need
to perform an extra pass.

Because of the address range in which JITed images are allocated
on powerpc64, the offsets of the start addresses of these images
from __bpf_call_base are as large as 64 bits. So, for a function
call, we cannot use the imm field of the instruction to determine
the callee's address. Instead, we use the alternative method of
getting it from the list of function addresses in the auxiliary
data of the caller by using the off field as an index.
Signed-off-by: NSandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

For multi-function programs, loading the address of a callee
function to a register requires emitting instructions whose
count varies from one to five depending on the nature of the
address.

Since we come to know of the callee's address only before the
extra pass, the number of instructions required to load this
address may vary from what was previously generated. This can
make the JITed image grow or shrink.

To avoid this, we should generate a constant five-instruction
when loading function addresses by padding the optimized load
sequence with NOPs.
Signed-off-by: NSandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

The imm field of a bpf instruction is a signed 32-bit integer.
For JITed bpf-to-bpf function calls, it holds the offset of the
start address of the callee's JITed image from __bpf_call_base.

For some architectures, such as powerpc64, this offset may be
as large as 64 bits and cannot be accomodated in the imm field
without truncation.

We resolve this by:

[1] Additionally using the auxiliary data of each function to
    keep a list of start addresses of the JITed images for all
    functions determined by the verifier.

[2] Retaining the subprog id inside the off field of the call
    instructions and using it to index into the list mentioned
    above and lookup the callee's address.

To make sure that the existing JIT compilers continue to work
without requiring changes, we keep the imm field as it is.
Signed-off-by: NSandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Sparse warning:
kernel/bpf/btf.c:1985:34: warning: Variable length array is used.

This patch directly uses ARRAY_SIZE().

Fixes: f80442a4 ("bpf: btf: Change how section is supported in btf_header")
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

On arm32, 'cd tools/testing/selftests/bpf && make' fails with:

libbpf.c:80:10: error: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘int64_t {aka long long int}’ [-Werror=format=]
   (func)("libbpf: " fmt, ##__VA_ARGS__); \
          ^
libbpf.c:83:30: note: in expansion of macro ‘__pr’
 #define pr_warning(fmt, ...) __pr(__pr_warning, fmt, ##__VA_ARGS__)
                              ^~~~
libbpf.c:1072:3: note: in expansion of macro ‘pr_warning’
   pr_warning("map:%s value_type:%s has BTF type_size:%ld != value_size:%u\n",

To fix, typecast 'key_size' and amend format string.
Signed-off-by: NSirio Balmelli <sirio@b-ad.ch>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Selftests fail to build on several distros/architectures because of
	missing headers files.

On a Ubuntu/x86_64 some missing headers are:
	asm/byteorder.h, asm/socket.h, asm/sockios.h

On a Debian/arm32 build already fails at sys/cdefs.h

In both cases, these already exist in /usr/include/<arch-specific-dir>,
but Clang does not include these when using '-target bpf' flag,
since it is no longer compiling against the host architecture.

The solution is to:

- run Clang without '-target bpf' and extract the include chain for the
current system

- add these to the bpf build with '-idirafter'

The choice of -idirafter is to catch this error without injecting
unexpected include behavior: if an arch-specific tree is built
for bpf in the future, this will be correctly found by Clang.
Signed-off-by: NSirio Balmelli <sirio@b-ad.ch>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Martin KaFai Lau says:

====================
This patch set makes some changes to cleanup the unused
bits in BTF uapi.  It also makes the btf_header extensible.

Please see individual patches for details.

v2:
- Remove NR_SECS from patch 2
- Remove "unsigned" check on array->index_type from patch 3
- Remove BTF_INT_VARARGS and further limit BTF_INT_ENCODING
  from 8 bits to 4 bits in patch 4
- Adjustments in test_btf.c to reflect changes in v2
====================
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch does the followings:
1. Modify libbpf and test_btf to reflect the uapi changes in btf
2. Add test for the btf_header changes
3. Add tests for array->index_type
4. Add err_str check to the tests
5. Fix a 4 bytes hole in "struct test #1" by swapping "m" and "n"
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch sync the uapi bpf.h and btf.h to tools.
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

In "struct bpf_map_info", the name "btf_id", "btf_key_id" and "btf_value_id"
could cause confusion because the "id" of "btf_id" means the BPF obj id
given to the BTF object while
"btf_key_id" and "btf_value_id" means the BTF type id within
that BTF object.

To make it clear, btf_key_id and btf_value_id are
renamed to btf_key_type_id and btf_value_type_id.
Suggested-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch does the followings:
1. Limit BTF_MAX_TYPES and BTF_MAX_NAME_OFFSET to 64k.  We can
   raise it later.

2. Remove the BTF_TYPE_PARENT and BTF_STR_TBL_ELF_ID.  They are
   currently encoded at the highest bit of a u32.
   It is because the current use case does not require supporting
   parent type (i.e type_id referring to a type in another BTF file).
   It also does not support referring to a string in ELF.

   The BTF_TYPE_PARENT and BTF_STR_TBL_ELF_ID checks are replaced
   by BTF_TYPE_ID_CHECK and BTF_STR_OFFSET_CHECK which are
   defined in btf.c instead of uapi/linux/btf.h.

3. Limit the BTF_INFO_KIND from 5 bits to 4 bits which is enough.
   There is unused bits headroom if we ever needed it later.

4. The root bit in BTF_INFO is also removed because it is not
   used in the current use case.

5. Remove BTF_INT_VARARGS since func type is not supported now.
   The BTF_INT_ENCODING is limited to 4 bits instead of 8 bits.

The above can be added back later because the verifier
ensures the unused bits are zeros.
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Instead of ingoring the array->index_type field.  Enforce that
it must be a BTF_KIND_INT in size 1/2/4/8 bytes.
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

There are currently unused section descriptions in the btf_header.  Those
sections are here to support future BTF use cases.  For example, the
func section (func_off) is to support function signature (e.g. the BPF
prog function signature).

Instead of spelling out all potential sections up-front in the btf_header.
This patch makes changes to btf_header such that extending it (e.g. adding
a section) is possible later.  The unused ones can be removed for now and
they can be added back later.

This patch:
1. adds a hdr_len to the btf_header.  It will allow adding
sections (and other info like parent_label and parent_name)
later.  The check is similar to the existing bpf_attr.
If a user passes in a longer hdr_len, the kernel
ensures the extra tailing bytes are 0.

2. allows the section order in the BTF object to be
different from its sec_off order in btf_header.

3. each sec_off is followed by a sec_len.  It must not have gap or
overlapping among sections.

The string section is ensured to be at the end due to the 4 bytes
alignment requirement of the type section.

The above changes will allow enough flexibility to
add new sections (and other info) to the btf_header later.

This patch also removes an unnecessary !err check
at the end of btf_parse().
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch exposes check_uarg_tail_zero() which will
be reused by a later BTF patch.  Its name is changed to
bpf_check_uarg_tail_zero().
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

David Ahern says:

====================
Packets that exceed the egress MTU can not be forwarded in the fast path.
Add IPv4 and IPv6 MTU helpers that take a FIB lookup result (versus the
typical dst path) and add the calls to bpf_ipv{4,6}_fib_lookup.

v2
- add ip6_mtu_from_fib6 to ipv6_stub
- only call the new MTU helpers for fib lookups in XDP path; skb
  path uses is_skb_forwardable to determine if the packet can be
  sent via the egress device from the FIB lookup
====================
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add check that egress MTU can handle packet to be forwarded. If
the MTU is less than the packet length, return 0 meaning the
packet is expected to continue up the stack for help - eg.,
fragmenting the packet or sending an ICMP.

The XDP path needs to leverage the FIB entry for an MTU on the
route spec or an exception entry for a given destination. The
skb path lets is_skb_forwardable decide if the packet can be
sent.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Determine path MTU from a FIB lookup result. Logic is based on
ip6_dst_mtu_forward plus lookup of nexthop exception.

Add ip6_dst_mtu_forward to ipv6_stubs to handle access by core
bpf code.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Determine path MTU from a FIB lookup result. Logic is a distillation of
ip_dst_mtu_maybe_forward.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Björn Töpel says:

====================
This the second follow-up set. The first four patches are uapi
changes:

* Removing rebind support
* Getting rid of structure hole
* Removing explicit cache line alignment
* Stricter bind checks

The last patches do some cleanups, where the umem and refcount_t
changes were suggested by Daniel.

* Add a missing write-barrier and use READ_ONCE for data-dependencies
* Clean up umem and do proper locking
* Convert atomic_t to refcount_t
====================
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Introduce refcount_t, in favor of atomic_t.
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

As suggested by Daniel Borkmann, the umem setup code was a too
defensive and complex. Here, we reduce the number of checks. Also, the
memory pinning is now folded into the umem creation, and we do correct
locking.
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Here, we add a missing write-barrier, and use READ_ONCE for the
data-dependency barrier.
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Adapt xdpsock to use the new getsockopt introduced in the previous
commit.
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

In this commit we remove the explicit ring structure from the the
uapi. It is tricky for an uapi to depend on a certain L1 cache line
size, since it can differ for variants of the same architecture. Now,
we let the user application determine the offsets of the producer,
consumer and descriptors by asking the socket via getsockopt.

A typical flow would be (Rx ring):

  struct xdp_mmap_offsets off;
  struct xdp_desc *ring;
  u32 *prod, *cons;
  void *map;
  ...

  getsockopt(fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen);

  map = mmap(NULL, off.rx.desc +
		   NUM_DESCS * sizeof(struct xdp_desc),
		   PROT_READ | PROT_WRITE,
		   MAP_SHARED | MAP_POPULATE, sfd,
		   XDP_PGOFF_RX_RING);
  prod = map + off.rx.producer;
  cons = map + off.rx.consumer;
  ring = map + off.rx.desc;
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Validate the queue id against both Rx and Tx on the netdev. Also, make
sure that the queue exists at xmit time.
Reported-by: NJesper Dangaard Brouer <brouer@redhat.com>
Tested-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Move the sxdp_flags up, avoiding a hole in the uapi structure.
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Supporting rebind, i.e. after a successful bind the process can call
bind again without closing the socket, makes the AF_XDP setup state
machine more complex. Constrain the state space, by not supporting
rebind.
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>