When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

The Versatile PCI controller driver has the same issue.
Replace pci_remap_iospace() with the devm_ managed version to fix the bug.

Fixes: b7e78170 ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver")
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>

When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

The X-Gene PCI controller driver has the same issue.
Replace pci_remap_iospace() with the devm_ managed version so that the
pages get unmapped automagically on any probe failure.

Fixes: 5f6b6ccd ("PCI: xgene: Add APM X-Gene PCIe driver")
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>

When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

Introduce the devm_pci_remap_iospace() managed API and replace the
pci_remap_iospace() call with it to fix the bug.

Fixes: dbf9826d ("PCI: generic: Convert to DT resource parsing API")
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: split commit/updated the commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>

commit ef1433f7 ("PCI: endpoint: Create configfs entry for each
pci_epf_device_id table entry") while adding configfs entry for each
pci_epf_device_id table entry introduced a NULL pointer dereference error
when CONFIG_PCI_ENDPOINT_CONFIGFS is not enabled.

Fix it here.

Fixes: ef1433f7 ("PCI: endpoint: Create configfs entry for each
pci_epf_device_id table entry")
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
[lorenzo.pieralisi: updated commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Commit de0aa7b2 ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
uses local_bh_disable()/enable(), because hv_pci_onchannelcallback() can
also run in tasklet context as the channel event callback, so bottom halves
should be disabled to prevent a race condition.

With CONFIG_PROVE_LOCKING=y in the recent mainline, or old kernels that
don't have commit f71b74bc ("irq/softirqs: Use lockdep to assert IRQs
are disabled/enabled"), when the upper layer IRQ code calls
hv_compose_msi_msg() with local IRQs disabled, we'll see a warning at the
beginning of __local_bh_enable_ip():

  IRQs not enabled as expected
    WARNING: CPU: 0 PID: 408 at kernel/softirq.c:162 __local_bh_enable_ip

The warning exposes an issue in de0aa7b2: local_bh_enable() can
potentially call do_softirq(), which is not supposed to run when local IRQs
are disabled. Let's fix this by using local_irq_save()/restore() instead.

Note: hv_pci_onchannelcallback() is not a hot path because it's only called
when the PCI device is hot added and removed, which is infrequent.

Fixes: de0aa7b2 ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
Signed-off-by: NDexuan Cui <decui@microsoft.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>

Before 8d85a7a4 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"),
pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual
functions".  After 8d85a7a4, it means "we can't enable *any* VFs".

That broke this scenario where nfp intends to remove any limit on the
number of VFs that can be enabled:

  nfp_pci_probe
    nfp_pcie_sriov_read_nfd_limit
      nfp_rtsym_read_le("nfd_vf_cfg_max_vfs", &err)
      pci_sriov_set_totalvfs(pf->pdev, 0)   # if FW didn't expose a limit

  ...
  # userspace writes N to sysfs "sriov_numvfs":
  sriov_numvfs_store
    pci_sriov_get_totalvfs                  # now returns 0
    return -ERANGE

Prior to 8d85a7a4, pci_sriov_get_totalvfs() returned TotalVFs, but it
now returns 0.

Remove the pci_sriov_set_totalvfs(pdev, 0) calls so we don't limit the
number of VFs that can be enabled.

Fixes: 8d85a7a4 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
[bhelgaas: changelog]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The TotalVFs register in the SR-IOV capability is the hardware limit on the
number of VFs.  A PF driver can limit the number of VFs further with
pci_sriov_set_totalvfs().  When the PF driver is removed, reset any VF
limit that was imposed by the driver because that limit may not apply to
other drivers.

Before 8d85a7a4 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"),
pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual
functions", and the nfp driver used that to remove the VF limit when the
driver unloads.

8d85a7a4 broke that because instead of removing the VF limit,
pci_sriov_set_totalvfs(pdev, 0) actually sets the limit to zero, and that
limit persists even if another driver is loaded.

We could fix that by making the nfp driver reset the limit when it unloads,
but it seems more robust to do it in the PCI core instead of relying on the
driver.

The regression scenario is:

  nfp_pci_probe (driver 1)
  ...
  nfp_pci_remove
    pci_sriov_set_totalvfs(pf->pdev, 0)   # limits VFs to 0

  ...
  nfp_pci_probe (driver 2)
    nfp_rtsym_read_le("nfd_vf_cfg_max_vfs")
    # no VF limit from firmware

Now driver 2 is broken because the VF limit is still 0 from driver 1.

Fixes: 8d85a7a4 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
[bhelgaas: changelog, rename functions]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The call to of_get_next_child() returns a node pointer with refcount
incremented thus it must be explicitly decremented here in the error
path and after the last usage.

Fixes: d3c68e0a ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver")
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>

The call to of_get_next_child() returns a node pointer with
refcount incremented thus it must be explicitly decremented
here after the last usage.

Fixes: ab597d35 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller")
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The call to of_get_next_child() returns a node pointer with refcount
incremented thus it must be explicitly decremented here after the last
usage.

Fixes: 8961def5 ("PCI: xilinx: Add Xilinx AXI PCIe Host Bridge IP driver")
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
[lorenzo.pieralisi@arm.com: reworked commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

We need to use list_for_each_entry_safe() because the
pci_ep_cfs_remove_epf_group() function frees "group".

Fixes: ef1433f7 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NKishon Vijay Abraham I <kishon@ti.com>

PCIE_DW_PLAT_HOST does not have any platform dependency, so it should
not default to yes.

Fixes: 1d906b22 ("PCI: dwc: Add support for EP mode")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NGustavo Pimentel <gustavo.pimentel@synopsys.com>

If the Gen3 PHY fails to power up, the code does not undo the
initialization caused by phy_init(). Add the missing failure
handling to the rcar_pcie_phy_init_gen3() function.

Fixes: 517ca93a ("PCI: rcar: Add R-Car gen3 PHY support")
Reported-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Wolfram Sang <wsa@the-dreams.de>

If anything fails past phy_init_fn() and the system is a Gen3 with
a PHY, the PHY will be left on and inited. This is caused by the
phy_init_fn, which is in fact a pointer to rcar_pcie_phy_init_gen3()
function, which starts the PHY, yet has no counterpart in the failpath.
Add that counterpart.

Fixes: 517ca93a ("PCI: rcar: Add R-Car gen3 PHY support")
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Wolfram Sang <wsa@the-dreams.de>

Commit 51bc085d ("PCI: Improve host drivers compile test coverage")
added configuration options to allow PCI host controller drivers to be
compile tested on all architectures.

Some host controller drivers (eg PCIE_ALTERA) config entries select the
PCI_DOMAINS config option to enable PCI domains management in the kernel.
Now that host controller drivers can be compiled on all architectures, this
triggers build regressions on arches that do not implement the PCI_DOMAINS
required API (ie pci_domain_nr()):

  drivers/ata/pata_ali.c: In function 'ali_init_chipset':
  drivers/ata/pata_ali.c:469:38: error: implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'?

Furthemore, some software configurations (ie Jailhouse) require a
PCI_DOMAINS enabled kernel to configure multiple host controllers without
having an explicit dependency on the ARM platform on which they run.

Make PCI_DOMAINS a visible configuration option on ARM so that software
configurations that need it can manually select it and move the PCI_DOMAINS
selection from PCI controllers configuration file to ARM sub-arch config
entries that currently require it, fixing the issue.

Fixes: 51bc085d ("PCI: Improve host drivers compile test coverage")
Link: https://lkml.kernel.org/r/20180612170229.GA10141@roeck-us.netReported-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <helgaas@kernel.org>
Acked-by: NJan Kiszka <jan.kiszka@siemens.com>
Acked-by: NLey Foon Tan <ley.foon.tan@intel.com>
Acked-by: NRob Herring <robh@kernel.org>
Cc: Scott Branden <scott.branden@broadcom.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Guenter Roeck <linux@roeck-us.net>

The endpoint library must be initialized before its users, which are in
drivers/pci/controllers.  The endpoint initialization currently depends on
link order.

This corrects a kernel crash when loading the Cadence EP driver, since it
calls devm_pci_epc_create() and this is only valid once the endpoint
library has been initialized.

Fixes: 6e0832fa ("PCI: Collect all native drivers under drivers/pci/controller/")
Signed-off-by: NAlan Douglas <adouglas@cadence.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

An SHPC can be operated either by platform firmware or by the OS.  The OS
uses a host bridge ACPI _OSC method to negotiate for control of SHPC.  If
firmware wants to prevent an OS from operating an SHPC, it must supply an
_OSC method that declines to grant SHPC ownership to the OS.

If acpi_pci_find_root() returns NULL, it means there's no ACPI host bridge
device (PNP0A03 or PNP0A08) and hence no _OSC method, so the OS is always
allowed to manage the SHPC.

Fix a NULL pointer dereference when CONFIG_ACPI=y but the current
hardware/firmware platform doesn't support ACPI.  In that case,
acpi_get_hp_hw_control_from_firmware() is implemented but
acpi_pci_find_root() returns NULL.

Fixes: 90cc0c3c ("PCI: shpchp: Add shpchp_is_native()")
Link: https://lkml.kernel.org/r/20180621164715.28160-1-marc.zyngier@arm.comReported-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>

Pull block fixes from Jens Axboe:
 "A collection of fixes that should go into -rc1. This contains:

   - bsg_open vs bsg_unregister race fix (Anatoliy)

   - NVMe pull request from Christoph, with fixes for regressions in
     this window, FC connect/reconnect path code unification, and a
     trace point addition.

   - timeout fix (Christoph)

   - remove a few unused functions (Christoph)

   - blk-mq tag_set reinit fix (Roman)"

* tag 'for-linus-20180616' of git://git.kernel.dk/linux-block:
  bsg: fix race of bsg_open and bsg_unregister
  block: remov blk_queue_invalidate_tags
  nvme-fabrics: fix and refine state checks in __nvmf_check_ready
  nvme-fabrics: handle the admin-only case properly in nvmf_check_ready
  nvme-fabrics: refactor queue ready check
  blk-mq: remove blk_mq_tagset_iter
  nvme: remove nvme_reinit_tagset
  nvme-fc: fix nulling of queue data on reconnect
  nvme-fc: remove reinit_request routine
  blk-mq: don't time out requests again that are in the timeout handler
  nvme-fc: change controllers first connect to use reconnect path
  nvme: don't rely on the changed namespace list log
  nvmet: free smart-log buffer after use
  nvme-rdma: fix error flow during mapping request data
  nvme: add bio remapping tracepoint
  nvme: fix NULL pointer dereference in nvme_init_subsystem
  blk-mq: reinit q->tag_set_list entry only after grace period

Pull documentation fixes from Mauro Carvalho Chehab:
 "This solves a series of broken links for files under Documentation,
  and improves a script meant to detect such broken links (see
  scripts/documentation-file-ref-check).

  The changes on this series are:

   - can.rst: fix a footnote reference;

   - crypto_engine.rst: Fix two parsing warnings;

   - Fix a lot of broken references to Documentation/*;

   - improve the scripts/documentation-file-ref-check script, in order
     to help detecting/fixing broken references, preventing
     false-positives.

  After this patch series, only 33 broken references to doc files are
  detected by scripts/documentation-file-ref-check"

* tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental: (26 commits)
  fix a series of Documentation/ broken file name references
  Documentation: rstFlatTable.py: fix a broken reference
  ABI: sysfs-devices-system-cpu: remove a broken reference
  devicetree: fix a series of wrong file references
  devicetree: fix name of pinctrl-bindings.txt
  devicetree: fix some bindings file names
  MAINTAINERS: fix location of DT npcm files
  MAINTAINERS: fix location of some display DT bindings
  kernel-parameters.txt: fix pointers to sound parameters
  bindings: nvmem/zii: Fix location of nvmem.txt
  docs: Fix more broken references
  scripts/documentation-file-ref-check: check tools/*/Documentation
  scripts/documentation-file-ref-check: get rid of false-positives
  scripts/documentation-file-ref-check: hint: dash or underline
  scripts/documentation-file-ref-check: add a fix logic for DT
  scripts/documentation-file-ref-check: accept more wildcards at filenames
  scripts/documentation-file-ref-check: fix help message
  media: max2175: fix location of driver's companion documentation
  media: v4l: fix broken video4linux docs locations
  media: dvb: point to the location of the old README.dvb-usb file
  ...

Pull fsnotify updates from Jan Kara:
 "fsnotify cleanups unifying handling of different watch types.

  This is the shortened fsnotify series from Amir with the last five
  patches pulled out. Amir has modified those patches to not change
  struct inode but obviously it's too late for those to go into this
  merge window"

* tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: add fsnotify_add_inode_mark() wrappers
  fanotify: generalize fanotify_should_send_event()
  fsnotify: generalize send_to_group()
  fsnotify: generalize iteration of marks by object type
  fsnotify: introduce marks iteration helpers
  fsnotify: remove redundant arguments to handle_event()
  fsnotify: use type id to identify connector object type

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "There is nothing really major here, few small fixes, some cleanups and
  dead drivers removal:

   - mark omapfb drivers as orphans in MAINTAINERS file (Tomi Valkeinen)

   - add missing module license tags to omap/omapfb driver (Arnd
     Bergmann)

   - add missing GPIOLIB dependendy to omap2/omapfb driver (Arnd
     Bergmann)

   - convert savagefb, aty128fb & radeonfb drivers to use msleep & co.
     (Jia-Ju Bai)

   - allow COMPILE_TEST build for viafb driver (media part was reviewed
     by media subsystem Maintainer)

   - remove unused MERAM support from sh_mobile_lcdcfb and shmob-drm
     drivers (drm parts were acked by shmob-drm driver Maintainer)

   - remove unused auo_k190xfb drivers

   - misc cleanups (Souptick Joarder, Wolfram Sang, Markus Elfring, Andy
     Shevchenko, Colin Ian King)"

* tag 'fbdev-v4.18' of git://github.com/bzolnier/linux: (26 commits)
  fb_omap2: add gpiolib dependency
  video/omap: add module license tags
  MAINTAINERS: make omapfb orphan
  video: fbdev: pxafb: match_string() conversion fixup
  video: fbdev: nvidia: fix spelling mistake: "scaleing" -> "scaling"
  video: fbdev: fix spelling mistake: "frambuffer" -> "framebuffer"
  video: fbdev: pxafb: Convert to use match_string() helper
  video: fbdev: via: allow COMPILE_TEST build
  video: fbdev: remove unused sh_mobile_meram driver
  drm: shmobile: remove unused MERAM support
  video: fbdev: sh_mobile_lcdcfb: remove unused MERAM support
  video: fbdev: remove unused auo_k190xfb drivers
  video: omap: Improve a size determination in omapfb_do_probe()
  video: sm501fb: Improve a size determination in sm501fb_probe()
  video: fbdev-MMP: Improve a size determination in path_init()
  video: fbdev-MMP: Delete an error message for a failed memory allocation in two functions
  video: auo_k190x: Delete an error message for a failed memory allocation in auok190x_common_probe()
  video: sh_mobile_lcdcfb: Delete an error message for a failed memory allocation in two functions
  video: sh_mobile_meram: Delete an error message for a failed memory allocation in sh_mobile_meram_probe()
  video: fbdev: sh_mobile_meram: Drop SUPERH platform dependency
  ...

Pull AFS updates from Al Viro:
 "Assorted AFS stuff - ended up in vfs.git since most of that consists
  of David's AFS-related followups to Christoph's procfs series"

* 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  afs: Optimise callback breaking by not repeating volume lookup
  afs: Display manually added cells in dynamic root mount
  afs: Enable IPv6 DNS lookups
  afs: Show all of a server's addresses in /proc/fs/afs/servers
  afs: Handle CONFIG_PROC_FS=n
  proc: Make inline name size calculation automatic
  afs: Implement network namespacing
  afs: Mark afs_net::ws_cell as __rcu and set using rcu functions
  afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus()
  proc: Add a way to make network proc files writable
  afs: Rearrange fs/afs/proc.c to remove remaining predeclarations.
  afs: Rearrange fs/afs/proc.c to move the show routines up
  afs: Rearrange fs/afs/proc.c by moving fops and open functions down
  afs: Move /proc management functions to the end of the file

Pull compat updates from Al Viro:
 "Some biarch patches - getting rid of assorted (mis)uses of
  compat_alloc_user_space().

  Not much in that area this cycle..."

* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  orangefs: simplify compat ioctl handling
  signalfd: lift sigmask copyin and size checks to callers of do_signalfd4()
  vmsplice(): lift importing iovec into vmsplice(2) and compat counterpart

Pull aio fixes from Al Viro:
 "Assorted AIO followups and fixes"

* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  eventpoll: switch to ->poll_mask
  aio: only return events requested in poll_mask() for IOCB_CMD_POLL
  eventfd: only return events requested in poll_mask()
  aio: mark __aio_sigset::sigmask const

Pull networking fixes from David Miller:

 1) Various netfilter fixlets from Pablo and the netfilter team.

 2) Fix regression in IPVS caused by lack of PMTU exceptions on local
    routes in ipv6, from Julian Anastasov.

 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia.

 4) Don't crash on poll in TLS, from Daniel Borkmann.

 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things
    including Avahi mDNS. From Bart Van Assche.

 6) Missing of_node_put in qcom/emac driver, from Yue Haibing.

 7) We lack checking of the TCP checking in one special case during SYN
    receive, from Frank van der Linden.

 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg.

 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman.

10) Must grab HW caps before doing quirk checks in stmmac driver, from
    Jose Abreu.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
  net: stmmac: Run HWIF Quirks after getting HW caps
  neighbour: skip NTF_EXT_LEARNED entries during forced gc
  net: cxgb3: add error handling for sysfs_create_group
  tls: fix waitall behavior in tls_sw_recvmsg
  tls: fix use-after-free in tls_push_record
  l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
  l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
  mlxsw: spectrum_switchdev: Fix port_vlan refcounting
  mlxsw: spectrum_router: Align with new route replace logic
  mlxsw: spectrum_router: Allow appending to dev-only routes
  ipv6: Only emit append events for appended routes
  stmmac: added support for 802.1ad vlan stripping
  cfg80211: fix rcu in cfg80211_unregister_wdev
  mac80211: Move up init of TXQs
  mac80211_hwsim: fix module init error paths
  cfg80211: initialize sinfo in cfg80211_get_station
  nl80211: fix some kernel doc tag mistakes
  hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload
  rds: avoid unenecessary cong_update in loop transport
  l2tp: clean up stale tunnel or session in pppol2tp_connect's error path
  ...

Pull module updates from Jessica Yu:
 "Minor code cleanup and also allow sig_enforce param to be shown in
  sysfs with CONFIG_MODULE_SIG_FORCE"

* tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Allow to always show the status of modsign
  module: Do not access sig_enforce directly

Pull uml updates from Richard Weinberger:
 "Minor updates for UML:

   - fixes for our new vector network driver by Anton

   - initcall cleanup by Alexander

   - We have a new mailinglist, sourceforge.net sucks"

* 'for-linus-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Fix raw interface options
  um: Fix initialization of vector queues
  um: remove uml initcalls
  um: Update mailing list address

Merge tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains some small RISC-V updates I'd like to target for 4.18.

  They are all fairly small this time. Here's a short summary, there's
  more info in the commits/merges:

   - a fix to __clear_user to respect the passed arguments.

   - enough support for the perf subsystem to work with RISC-V's ISA
     defined performance counters.

   - support for sparse and cleanups suggested by it.

   - support for R_RISCV_32 (a relocation, not the 32-bit ISA).

   - some MAINTAINERS cleanups.

   - the addition of CONFIG_HVC_RISCV_SBI to our defconfig, as it's
     always present.

  I've given these a simple build+boot test"

* tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig
  RISC-V: Handle R_RISCV_32 in modules
  riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't set
  riscv: add riscv-specific predefines to CHECKFLAGS
  riscv: split the declaration of __copy_user
  riscv: no __user for probe_kernel_address()
  riscv: use NULL instead of a plain 0
  perf: riscv: Add Document for Future Porting Guide
  perf: riscv: preliminary RISC-V support
  MAINTAINERS: Update Albert's email, he's back at Berkeley
  MAINTAINERS: Add myself as a maintainer for SiFive's drivers
  riscv: Fix the bug in memory access fixup code

Pull more kvm updates from Paolo Bonzini:
 "Mostly the PPC part of the release, but also switching to Arnd's fix
  for the hyperv config issue and a typo fix.

  Main PPC changes:

   - reimplement the MMIO instruction emulation

   - transactional memory support for PR KVM

   - improve radix page table handling"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (63 commits)
  KVM: x86: VMX: redo fix for link error without CONFIG_HYPERV
  KVM: x86: fix typo at kvm_arch_hardware_setup comment
  KVM: PPC: Book3S PR: Fix failure status setting in tabort. emulation
  KVM: PPC: Book3S PR: Enable use on POWER9 bare-metal hosts in HPT mode
  KVM: PPC: Book3S PR: Don't let PAPR guest set MSR hypervisor bit
  KVM: PPC: Book3S PR: Fix failure status setting in treclaim. emulation
  KVM: PPC: Book3S PR: Fix MSR setting when delivering interrupts
  KVM: PPC: Book3S PR: Handle additional interrupt types
  KVM: PPC: Book3S PR: Enable kvmppc_get/set_one_reg_pr() for HTM registers
  KVM: PPC: Book3S: Remove load/put vcpu for KVM_GET_REGS/KVM_SET_REGS
  KVM: PPC: Remove load/put vcpu for KVM_GET/SET_ONE_REG ioctl
  KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl
  KVM: PPC: Book3S PR: Enable HTM for PR KVM for KVM_CHECK_EXTENSION ioctl
  KVM: PPC: Book3S PR: Support TAR handling for PR KVM HTM
  KVM: PPC: Book3S PR: Add guard code to prevent returning to guest with PR=0 and Transactional state
  KVM: PPC: Book3S PR: Add emulation for tabort. in privileged state
  KVM: PPC: Book3S PR: Add emulation for trechkpt.
  KVM: PPC: Book3S PR: Add emulation for treclaim.
  KVM: PPC: Book3S PR: Restore NV regs after emulating mfspr from TM SPRs
  KVM: PPC: Book3S PR: Always fail transactions in guest privileged state
  ...

Pull virtio updates from Michael Tsirkin:
 "virtio, vhost: features, fixes

   - PCI virtual function support for virtio

   - DMA barriers for virtio strong barriers

   - bugfixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio: update the comments for transport features
  virtio_pci: support enabling VFs
  vhost: fix info leak due to uninitialized memory
  virtio_ring: switch to dma_XX barriers for rpmsg

As files move around, their previous links break. Fix the
references for them.
Acked-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

The old HOWTO was removed a long time ago. The flat table
version is not metioned elsewhere, so just get rid of the
text.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

This file doesn't exist anymore:
	Documentation/cpu-freq/user-guide.txt

As the ABI already points to Documentation/cpu-freq, just
remove the broken link and the associated text.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

As files got renamed, their references broke.

Manually fix a series of broken refs at the DT bindings.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

Rename:
	pinctrl-binding.txt -> pinctrl-bindings.txt

In order to match the current name of this file.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

There were some file movements that changed the location for
some DT bindings. Fix them with:
	scripts/documentation-file-ref-check --fix

After manually checking if the new file makes sense.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

The specified locations are not right. Fix the wildcard logic
to point to the correct directories.

Without that, get-maintainer won't get things right:

	$ ./scripts/get_maintainer.pl --no-git-fallback --no-r --no-n --no-l -f Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
	robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
	mark.rutland@arm.com (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)

After the patch, it will properly point to NPCM arch maintainers:
	$ ./scripts/get_maintainer.pl --no-git-fallback --no-r --no-n --no-l -f Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
	avifishman70@gmail.com (supporter:ARM/NUVOTON NPCM ARCHITECTURE)
	tmaimon77@gmail.com (supporter:ARM/NUVOTON NPCM ARCHITECTURE)
	robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
	mark.rutland@arm.com (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)

Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Cc: Patrick Venture <venture@google.com>
Cc: Nancy Yuen <yuenn@google.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

Those files got a manufacturer's name prepended and were moved around.
Adjust their references accordingly.

Also, due those movements, Documentation/devicetree/bindings/video
doesn't exist anymore.

Cc: David Airlie <airlied@linux.ie>
Cc: David Lechner <david@lechnology.com>
Cc: Peter Senna Tschudin <peter.senna@collabora.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@nxp.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

The alsa parameters file was renamed to alsa-configuration.rst.

With regards to OSS, it got retired as a hole by  at changeset
727dede0 ("sound: Retire OSS"). So, it doesn't make sense
to keep mentioning it at kernel-parameters.txt.

Fixes: 727dede0 ("sound: Retire OSS")
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>