Merge tag 'renesas-boards2-for-v3.15' of...

Merge tag 'renesas-boards2-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

Merge "Second Round of Renesas ARM Based SoC Board Updates for v3.15" from
Simon Horman:

* r7s72100 (RZ/A1H) based Genmai board
  - Enable SH ethernet
  - Add RSPI support

* r8a7791 (R-Car M2) based Koelsch board
  - Add QSPI support
  - Add I2C support
  - Pass SH ethernet PHY IRQ

* r8a7790 (R-Car H2) based Lager board
  - Switch QSPI to named IRQs
  - Add sound support
  - Add USB0 cable detection workaround
  - Pass SH ethernet PHY IRQ

* r8a7779 (R-Car H1) based Marzen board
  - Revert conditional selection of SMSC_PHY

* r8a7778 (R-Car M1) based Bock-W board
  - Use wp-gpios instead of WP pin

* tag 'renesas-boards2-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: genmai: Enable r7s72100-ether
  ARM: shmobile: lager legacy: Switch QSPI to named IRQs
  ARM: shmobile: koelsch legacy: Add QSPI support
  ARM: shmobile: genmai legacy: Add RSPI support
  Revert "ARM: shmobile: marzen: Conditionally select SMSC_PHY"
  ARM: shmobile: lager: add sound support
  ARM: shmobile: Lager USB0 cable detection workaround
  ARM: shmobile: bockw: use wp-gpios instead of WP pin
  ARM: shmobile: koelsch: Add I2C support
  ARM: shmobile: Koelsch: pass Ether PHY IRQ
  ARM: shmobile: Lager: pass Ether PHY IRQ

arch/arm/boot/dts/r8a7778-bockw-reference.dts

@@ -17,6 +17,7 @@
 /dts-v1/;
 #include "r8a7778.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "bockw";
@@ -84,7 +85,7 @@
 
 	sdhi0_pins: sd0 {
 		renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
-				  "sdhi0_cd", "sdhi0_wp";
+				  "sdhi0_cd";
 		renesas,function = "sdhi0";
 	};
 
@@ -101,6 +102,7 @@
 	vmmc-supply = <&fixedregulator3v3>;
 	bus-width = <4>;
 	status = "okay";
+	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
 };
 
 &hspi0 {

arch/arm/mach-shmobile/Kconfig

@@ -250,7 +250,6 @@ config MACH_MARZEN
 	depends on ARCH_R8A7779
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SMSC_PHY if SMSC911X
 	select USE_OF
 
 config MACH_MARZEN_REFERENCE
@@ -258,7 +257,6 @@ config MACH_MARZEN_REFERENCE
 	depends on ARCH_R8A7779
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SMSC_PHY if SMSC911X
 	select USE_OF
 	---help---
 	   Use reference implementation of Marzen board support
@@ -272,6 +270,7 @@ config MACH_LAGER
 	depends on ARCH_R8A7790
 	select USE_OF
 	select MICREL_PHY if SH_ETH
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 
 config MACH_KOELSCH
 	bool "Koelsch board"

arch/arm/mach-shmobile/board-genmai.c

@@ -20,15 +20,79 @@
 
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/sh_eth.h>
+#include <linux/spi/rspi.h>
+#include <linux/spi/spi.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/r7s72100.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* Ether */
+static const struct sh_eth_plat_data ether_pdata __initconst = {
+	.phy			= 0x00, /* PD60610 */
+	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
+	.no_ether_link		= 1
+};
+
+static const struct resource ether_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe8203000, 0x800),
+	DEFINE_RES_MEM(0xe8204800, 0x200),
+	DEFINE_RES_IRQ(gic_iid(359)),
+};
+
+/* RSPI */
+#define RSPI_RESOURCE(idx, baseaddr, irq)				\
+static const struct resource rspi##idx##_resources[] __initconst = {	\
+	DEFINE_RES_MEM(baseaddr, 0x24),					\
+	DEFINE_RES_IRQ_NAMED(irq, "error"),				\
+	DEFINE_RES_IRQ_NAMED(irq + 1, "rx"),				\
+	DEFINE_RES_IRQ_NAMED(irq + 2, "tx"),				\
+}
+
+RSPI_RESOURCE(0, 0xe800c800, gic_iid(270));
+RSPI_RESOURCE(1, 0xe800d000, gic_iid(273));
+RSPI_RESOURCE(2, 0xe800d800, gic_iid(276));
+RSPI_RESOURCE(3, 0xe800e000, gic_iid(279));
+RSPI_RESOURCE(4, 0xe800e800, gic_iid(282));
+
+static const struct rspi_plat_data rspi_pdata __initconst = {
+	.num_chipselect	= 1,
+};
+
+#define r7s72100_register_rspi(idx)					   \
+	platform_device_register_resndata(&platform_bus, "rspi-rz", idx,   \
+					rspi##idx##_resources,		   \
+					ARRAY_SIZE(rspi##idx##_resources), \
+					&rspi_pdata, sizeof(rspi_pdata))
+
+static const struct spi_board_info spi_info[] __initconst = {
+	{
+		.modalias               = "wm8978",
+		.max_speed_hz           = 5000000,
+		.bus_num                = 4,
+		.chip_select            = 0,
+	},
+};
+
 static void __init genmai_add_standard_devices(void)
 {
 	r7s72100_clock_init();
 	r7s72100_add_dt_devices();
+
+	platform_device_register_resndata(&platform_bus, "r7s72100-ether", -1,
+					  ether_resources,
+					  ARRAY_SIZE(ether_resources),
+					  &ether_pdata, sizeof(ether_pdata));
+
+	r7s72100_register_rspi(0);
+	r7s72100_register_rspi(1);
+	r7s72100_register_rspi(2);
+	r7s72100_register_rspi(3);
+	r7s72100_register_rspi(4);
+	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
 }
 
 static const char * const genmai_boards_compat_dt[] __initconst = {

arch/arm/mach-shmobile/board-koelsch.c

@@ -23,14 +23,20 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 #include <linux/phy.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/rcar-du.h>
 #include <linux/platform_device.h>
 #include <linux/sh_eth.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/rspi.h>
+#include <linux/spi/spi.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7791.h>
@@ -92,6 +98,7 @@ static void __init koelsch_add_du_device(void)
 /* Ether */
 static const struct sh_eth_plat_data ether_pdata __initconst = {
 	.phy			= 0x1,
+	.phy_irq		= irq_pin(0),
 	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
 	.phy_interface		= PHY_INTERFACE_MODE_RMII,
 	.ether_link_active_low	= 1,
@@ -148,6 +155,55 @@ static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = {
 	.nbuttons	= ARRAY_SIZE(gpio_buttons),
 };
 
+/* QSPI */
+static const struct resource qspi_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe6b10000, 0x1000),
+	DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),
+};
+
+static const struct rspi_plat_data qspi_pdata __initconst = {
+	.num_chipselect = 1,
+};
+
+/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64 MiB) */
+static struct mtd_partition spi_flash_part[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static const struct flash_platform_data spi_flash_data = {
+	.name		= "m25p80",
+	.parts		= spi_flash_part,
+	.nr_parts	= ARRAY_SIZE(spi_flash_part),
+	.type		= "s25fl512s",
+};
+
+static const struct spi_board_info spi_info[] __initconst = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &spi_flash_data,
+		.mode		= SPI_MODE_0,
+		.max_speed_hz	= 30000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
 /* SATA0 */
 static const struct resource sata0_resources[] __initconst = {
 	DEFINE_RES_MEM(0xee300000, 0x2000),
@@ -163,6 +219,38 @@ static const struct platform_device_info sata0_info __initconst = {
 	.dma_mask	= DMA_BIT_MASK(32),
 };
 
+/* I2C */
+static const struct resource i2c_resources[] __initconst = {
+	/* I2C0 */
+	DEFINE_RES_MEM(0xE6508000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(287)),
+	/* I2C1 */
+	DEFINE_RES_MEM(0xE6518000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(288)),
+	/* I2C2 */
+	DEFINE_RES_MEM(0xE6530000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(286)),
+	/* I2C3 */
+	DEFINE_RES_MEM(0xE6540000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(290)),
+	/* I2C4 */
+	DEFINE_RES_MEM(0xE6520000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(19)),
+	/* I2C5 */
+	DEFINE_RES_MEM(0xE6528000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(20)),
+};
+
+static void __init koelsch_add_i2c(unsigned idx)
+{
+	unsigned res_idx = idx * 2;
+
+	BUG_ON(res_idx >= ARRAY_SIZE(i2c_resources));
+
+	platform_device_register_simple("i2c-rcar_gen2", idx,
+					i2c_resources + res_idx, 2);
+}
+
 static const struct pinctrl_map koelsch_pinctrl_map[] = {
 	/* DU */
 	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
@@ -180,12 +268,26 @@ static const struct pinctrl_map koelsch_pinctrl_map[] = {
 				  "eth_rmii", "eth"),
 	PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
 				  "intc_irq0", "intc"),
+	/* QSPI */
+	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
+				  "qspi_ctrl", "qspi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
+				  "qspi_data4", "qspi"),
 	/* SCIF0 (CN19: DEBUG SERIAL0) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791",
 				  "scif0_data_d", "scif0"),
 	/* SCIF1 (CN20: DEBUG SERIAL1) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7791",
 				  "scif1_data_d", "scif1"),
+	/* I2C1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.1", "pfc-r8a7791",
+				  "i2c1_e", "i2c1"),
+	/* I2C2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.2", "pfc-r8a7791",
+				  "i2c2", "i2c2"),
+	/* I2C4 */
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.4", "pfc-r8a7791",
+				  "i2c4_c", "i2c4"),
 };
 
 static void __init koelsch_add_standard_devices(void)
@@ -205,10 +307,20 @@ static void __init koelsch_add_standard_devices(void)
 	platform_device_register_data(&platform_bus, "gpio-keys", -1,
 				      &koelsch_keys_pdata,
 				      sizeof(koelsch_keys_pdata));
+	platform_device_register_resndata(&platform_bus, "qspi", 0,
+					  qspi_resources,
+					  ARRAY_SIZE(qspi_resources),
+					  &qspi_pdata, sizeof(qspi_pdata));
+	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
 
 	koelsch_add_du_device();
 
 	platform_device_register_full(&sata0_info);
+
+	koelsch_add_i2c(1);
+	koelsch_add_i2c(2);
+	koelsch_add_i2c(4);
+	koelsch_add_i2c(5);
 }
 
 /*
@@ -232,6 +344,8 @@ static void __init koelsch_init(void)
 {
 	koelsch_add_standard_devices();
 
+	irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);
+
 	if (IS_ENABLED(CONFIG_PHYLIB))
 		phy_register_fixup_for_id("r8a7791-ether-ff:01",
 					  koelsch_ksz8041_fixup);

arch/arm/mach-shmobile/board-lager.c

@@ -20,8 +20,10 @@
 
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
+#include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
 #include <linux/mmc/host.h>
@@ -51,6 +53,20 @@
 #include <linux/spi/flash.h>
 #include <linux/spi/rspi.h>
 #include <linux/spi/spi.h>
+#include <sound/rcar_snd.h>
+#include <sound/simple_card.h>
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * this command is required when playback.
+ *
+ * # amixer set "LINEOUT Mixer DACL" on
+ */
 
 /* DU */
 static struct rcar_du_encoder_data lager_du_encoders[] = {
@@ -233,6 +249,7 @@ static const struct resource mmcif1_resources[] __initconst = {
 /* Ether */
 static const struct sh_eth_plat_data ether_pdata __initconst = {
 	.phy			= 0x1,
+	.phy_irq		= irq_pin(0),
 	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
 	.phy_interface		= PHY_INTERFACE_MODE_RMII,
 	.ether_link_active_low	= 1,
@@ -293,7 +310,7 @@ static const struct spi_board_info spi_info[] __initconst = {
 /* QSPI resource */
 static const struct resource qspi_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe6b10000, 0x1000),
-	DEFINE_RES_IRQ(gic_spi(184)),
+	DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),
 };
 
 /* VIN */
@@ -406,13 +423,30 @@ static int usbhs_hardware_init(struct platform_device *pdev)
 {
 	struct usbhs_private *priv = usbhs_get_priv(pdev);
 	struct usb_phy *phy;
+	int ret;
+
+	/* USB0 Function - use PWEN as GPIO input to detect DIP Switch SW5
+	 * setting to avoid VBUS short circuit due to wrong cable.
+	 * PWEN should be pulled up high if USB Function is selected by SW5
+	 */
+	gpio_request_one(RCAR_GP_PIN(5, 18), GPIOF_IN, NULL); /* USB0_PWEN */
+	if (!gpio_get_value(RCAR_GP_PIN(5, 18))) {
+		pr_warn("Error: USB Function not selected - check SW5 + SW6\n");
+		ret = -ENOTSUPP;
+		goto error;
+	}
 
 	phy = usb_get_phy_dev(&pdev->dev, 0);
-	if (IS_ERR(phy))
-		return PTR_ERR(phy);
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		goto error;
+	}
 
 	priv->phy = phy;
 	return 0;
+ error:
+	gpio_free(RCAR_GP_PIN(5, 18));
+	return ret;
 }
 
 static int usbhs_hardware_exit(struct platform_device *pdev)
@@ -424,6 +458,8 @@ static int usbhs_hardware_exit(struct platform_device *pdev)
 
 	usb_put_phy(priv->phy);
 	priv->phy = NULL;
+
+	gpio_free(RCAR_GP_PIN(5, 18));
 	return 0;
 }
 
@@ -488,6 +524,77 @@ static const struct resource usbhs_phy_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe6590100, 0x100),
 };
 
+/* I2C */
+static struct i2c_board_info i2c2_devices[] = {
+	{
+		I2C_BOARD_INFO("ak4643", 0x12),
+	}
+};
+
+/* Sound */
+static struct resource rsnd_resources[] __initdata = {
+	[RSND_GEN2_SCU]  = DEFINE_RES_MEM(0xec500000, 0x1000),
+	[RSND_GEN2_ADG]  = DEFINE_RES_MEM(0xec5a0000, 0x100),
+	[RSND_GEN2_SSIU] = DEFINE_RES_MEM(0xec540000, 0x1000),
+	[RSND_GEN2_SSI]  = DEFINE_RES_MEM(0xec541000, 0x1280),
+};
+
+static struct rsnd_ssi_platform_info rsnd_ssi[] = {
+	RSND_SSI_SET(0, 0, gic_spi(370), RSND_SSI_PLAY),
+	RSND_SSI_SET(0, 0, gic_spi(371), RSND_SSI_CLK_PIN_SHARE),
+};
+
+static struct rsnd_scu_platform_info rsnd_scu[2] = {
+	/* no member at this point */
+};
+
+static struct rcar_snd_info rsnd_info = {
+	.flags		= RSND_GEN2,
+	.ssi_info	= rsnd_ssi,
+	.ssi_info_nr	= ARRAY_SIZE(rsnd_ssi),
+	.scu_info	= rsnd_scu,
+	.scu_info_nr	= ARRAY_SIZE(rsnd_scu),
+};
+
+static struct asoc_simple_card_info rsnd_card_info = {
+	.name		= "AK4643",
+	.card		= "SSI01-AK4643",
+	.codec		= "ak4642-codec.2-0012",
+	.platform	= "rcar_sound",
+	.daifmt		= SND_SOC_DAIFMT_LEFT_J,
+	.cpu_dai = {
+		.name	= "rcar_sound",
+		.fmt	= SND_SOC_DAIFMT_CBS_CFS,
+	},
+	.codec_dai = {
+		.name	= "ak4642-hifi",
+		.fmt	= SND_SOC_DAIFMT_CBM_CFM,
+		.sysclk	= 11289600,
+	},
+};
+
+static void __init lager_add_rsnd_device(void)
+{
+	struct platform_device_info cardinfo = {
+		.parent         = &platform_bus,
+		.name           = "asoc-simple-card",
+		.id             = -1,
+		.data           = &rsnd_card_info,
+		.size_data      = sizeof(struct asoc_simple_card_info),
+		.dma_mask       = DMA_BIT_MASK(32),
+	};
+
+	i2c_register_board_info(2, i2c2_devices,
+				ARRAY_SIZE(i2c2_devices));
+
+	platform_device_register_resndata(
+		&platform_bus, "rcar_sound", -1,
+		rsnd_resources, ARRAY_SIZE(rsnd_resources),
+		&rsnd_info, sizeof(rsnd_info));
+
+	platform_device_register_full(&cardinfo);
+}
+
 static const struct pinctrl_map lager_pinctrl_map[] = {
 	/* DU (CN10: ARGB0, CN13: LVDS) */
 	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
@@ -496,12 +603,24 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
 				  "du_sync_1", "du"),
 	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
 				  "du_clk_out_0", "du"),
+	/* I2C2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar.2", "pfc-r8a7790",
+				  "i2c2", "i2c2"),
 	/* SCIF0 (CN19: DEBUG SERIAL0) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
 				  "scif0_data", "scif0"),
 	/* SCIF1 (CN20: DEBUG SERIAL1) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
 				  "scif1_data", "scif1"),
+	/* SSI (CN17: sound) */
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
+				  "ssi0129_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
+				  "ssi0_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
+				  "ssi1_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
+				  "audio_clk_a", "audio_clk"),
 	/* MMCIF1 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
 				  "mmc1_data8", "mmc1"),
@@ -534,7 +653,7 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
 				  "vin1_clk", "vin1"),
 	/* USB0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7790",
-				  "usb0", "usb0"),
+				  "usb0_ovc_vbus", "usb0"),
 };
 
 static void __init lager_add_standard_devices(void)
@@ -595,6 +714,8 @@ static void __init lager_add_standard_devices(void)
 					  &usbhs_phy_pdata,
 					  sizeof(usbhs_phy_pdata));
 	lager_register_usbhs();
+
+	lager_add_rsnd_device();
 }
 
 /*
@@ -618,6 +739,8 @@ static void __init lager_init(void)
 {
 	lager_add_standard_devices();
 
+	irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);
+
 	if (IS_ENABLED(CONFIG_PHYLIB))
 		phy_register_fixup_for_id("r8a7790-ether-ff:01",
 					  lager_ksz8041_fixup);