iommu/amd: Set the device table entry PPR bit for IOMMU V2 devices

The AMD IOMMU specification Rev 3.00 (December 2016) introduces a
new Enhanced PPR Handling Support (EPHSup) bit in the MMIO register
offset 0030h (IOMMU Extended Feature Register).

When EPHSup=1, the IOMMU hardware requires the PPR bit of the
device table entry (DTE) to be set in order to support PPR for a
particular endpoint device.

Please see https://support.amd.com/TechDocs/48882_IOMMU.pdf for
this revision of the AMD IOMMU specification.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

drivers/iommu/amd_iommu.c

@@ -1817,7 +1817,8 @@ static bool dma_ops_domain(struct protection_domain *domain)
 	return domain->flags & PD_DMA_OPS_MASK;
 }
 
-static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats)
+static void set_dte_entry(u16 devid, struct protection_domain *domain,
+			  bool ats, bool ppr)
 {
 	u64 pte_root = 0;
 	u64 flags = 0;
@@ -1834,6 +1835,13 @@ static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats)
 	if (ats)
 		flags |= DTE_FLAG_IOTLB;
 
+	if (ppr) {
+		struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
+
+		if (iommu_feature(iommu, FEATURE_EPHSUP))
+			pte_root |= 1ULL << DEV_ENTRY_PPR;
+	}
+
 	if (domain->flags & PD_IOMMUV2_MASK) {
 		u64 gcr3 = iommu_virt_to_phys(domain->gcr3_tbl);
 		u64 glx  = domain->glx;
@@ -1896,9 +1904,9 @@ static void do_attach(struct iommu_dev_data *dev_data,
 	domain->dev_cnt                 += 1;
 
 	/* Update device table */
-	set_dte_entry(dev_data->devid, domain, ats);
+	set_dte_entry(dev_data->devid, domain, ats, dev_data->iommu_v2);
 	if (alias != dev_data->devid)
-		set_dte_entry(alias, domain, ats);
+		set_dte_entry(alias, domain, ats, dev_data->iommu_v2);
 
 	device_flush_dte(dev_data);
 }
@@ -2277,13 +2285,15 @@ static void update_device_table(struct protection_domain *domain)
 	struct iommu_dev_data *dev_data;
 
 	list_for_each_entry(dev_data, &domain->dev_list, list) {
-		set_dte_entry(dev_data->devid, domain, dev_data->ats.enabled);
+		set_dte_entry(dev_data->devid, domain, dev_data->ats.enabled,
+			      dev_data->iommu_v2);
 
 		if (dev_data->devid == dev_data->alias)
 			continue;
 
 		/* There is an alias, update device table entry for it */
-		set_dte_entry(dev_data->alias, domain, dev_data->ats.enabled);
+		set_dte_entry(dev_data->alias, domain, dev_data->ats.enabled,
+			      dev_data->iommu_v2);
 	}
 }
 

drivers/iommu/amd_iommu_types.h

@@ -98,6 +98,7 @@
 #define FEATURE_HE		(1ULL<<8)
 #define FEATURE_PC		(1ULL<<9)
 #define FEATURE_GAM_VAPIC	(1ULL<<21)
+#define FEATURE_EPHSUP		(1ULL<<50)
 
 #define FEATURE_PASID_SHIFT	32
 #define FEATURE_PASID_MASK	(0x1fULL << FEATURE_PASID_SHIFT)
@@ -192,6 +193,7 @@
 /* macros and definitions for device table entries */
 #define DEV_ENTRY_VALID         0x00
 #define DEV_ENTRY_TRANSLATION   0x01
+#define DEV_ENTRY_PPR           0x34
 #define DEV_ENTRY_IR            0x3d
 #define DEV_ENTRY_IW            0x3e
 #define DEV_ENTRY_NO_PAGE_FAULT	0x62