e1000e: cleanup: rename e1000_get_cfg_done()

In keeping with the e1000e driver function naming convention, the subject
function is renamed to indicate it is generic, i.e. it is applicable to
more than just a single MAC family (e.g. 80003es2lan, 82571, ich8lan).
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/e1000e/82571.c

@@ -1940,7 +1940,7 @@ static const struct e1000_phy_operations e82_phy_ops_m88 = {
 	.check_reset_block	= e1000e_check_reset_block_generic,
 	.commit			= e1000e_phy_sw_reset,
 	.force_speed_duplex	= e1000e_phy_force_speed_duplex_m88,
-	.get_cfg_done		= e1000e_get_cfg_done,
+	.get_cfg_done		= e1000e_get_cfg_done_generic,
 	.get_cable_length	= e1000e_get_cable_length_m88,
 	.get_info		= e1000e_get_phy_info_m88,
 	.read_reg		= e1000e_read_phy_reg_m88,
@@ -1958,7 +1958,7 @@ static const struct e1000_phy_operations e82_phy_ops_bm = {
 	.check_reset_block	= e1000e_check_reset_block_generic,
 	.commit			= e1000e_phy_sw_reset,
 	.force_speed_duplex	= e1000e_phy_force_speed_duplex_m88,
-	.get_cfg_done		= e1000e_get_cfg_done,
+	.get_cfg_done		= e1000e_get_cfg_done_generic,
 	.get_cable_length	= e1000e_get_cable_length_m88,
 	.get_info		= e1000e_get_phy_info_m88,
 	.read_reg		= e1000e_read_phy_reg_bm2,

drivers/net/ethernet/intel/e1000e/e1000.h

@@ -654,7 +654,7 @@ extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
                                            u16 data);
 extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
 extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
-extern s32 e1000e_get_cfg_done(struct e1000_hw *hw);
+extern s32 e1000e_get_cfg_done_generic(struct e1000_hw *hw);
 extern s32 e1000e_get_cable_length_m88(struct e1000_hw *hw);
 extern s32 e1000e_get_phy_info_m88(struct e1000_hw *hw);
 extern s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);

drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -4378,7 +4378,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
 	u32 bank = 0;
 	u32 status;
 
-	e1000e_get_cfg_done(hw);
+	e1000e_get_cfg_done_generic(hw);
 
 	/* Wait for indication from h/w that it has completed basic config */
 	if (hw->mac.type >= e1000_ich10lan) {

drivers/net/ethernet/intel/e1000e/phy.c

@@ -2169,13 +2169,13 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
 }
 
 /**
- *  e1000e_get_cfg_done - Generic configuration done
+ *  e1000e_get_cfg_done_generic - Generic configuration done
  *  @hw: pointer to the HW structure
  *
  *  Generic function to wait 10 milli-seconds for configuration to complete
  *  and return success.
  **/
-s32 e1000e_get_cfg_done(struct e1000_hw *hw)
+s32 e1000e_get_cfg_done_generic(struct e1000_hw *hw)
 {
 	mdelay(10);