提交 fe1a83b4 编写于 作者: X Xiaolei Yu 提交者: Jiri Kosina

HID: uclogic: add support for Ugee Tablet EX07S

This device has a different vendor id but responds to initialization.
Signed-off-by: NXiaolei Yu <dreifachstein@gmail.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
上级 4d20c332
......@@ -2096,6 +2096,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_45) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_DRAWIMAGE_G3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER, USB_DEVICE_ID_UGTIZER_TABLET_GP0610) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_TABLET_EX07S) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SUPER_JOY_BOX_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD) },
......
......@@ -1028,6 +1028,9 @@
#define USB_DEVICE_ID_UGEE_TABLET_45 0x0045
#define USB_DEVICE_ID_YIYNOVA_TABLET 0x004d
#define USB_VENDOR_ID_UGEE 0x28bd
#define USB_DEVICE_ID_UGEE_TABLET_EX07S 0x0071
#define USB_VENDOR_ID_UNITEC 0x227d
#define USB_DEVICE_ID_UNITEC_USB_TOUCH_0709 0x0709
#define USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19 0x0a19
......
......@@ -977,6 +977,7 @@ static int uclogic_probe(struct hid_device *hdev,
}
break;
case USB_DEVICE_ID_UGTIZER_TABLET_GP0610:
case USB_DEVICE_ID_UGEE_TABLET_EX07S:
/* If this is the pen interface */
if (intf->cur_altsetting->desc.bInterfaceNumber == 1) {
rc = uclogic_tablet_enable(hdev);
......@@ -1069,6 +1070,7 @@ static const struct hid_device_id uclogic_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_45) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_DRAWIMAGE_G3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER, USB_DEVICE_ID_UGTIZER_TABLET_GP0610) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_TABLET_EX07S) },
{ }
};
MODULE_DEVICE_TABLE(hid, uclogic_devices);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册