Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 fe166148 编写于 作者: W Will Deacon 提交者： Russell King
浏览文件
操作

ARM: 6073/1: oprofile: remove old files and update KConfig 

Enable hardware perf-events if CPU_HAS_PMU and select
HAVE_OPROFILE if HAVE_PERF_EVENTS. If no hardware support
is present, OProfile will fall back to timer mode.

This patch also removes the old OProfile drivers in favour
of the code implemented by perf.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 8c1fc96f
隐藏空白更改
内联 并排
Showing with 3 addition and 1789 deletion
arch/arm/Kconfig
浏览文件 @ fe166148
...@@ -13,7 +13,7 @@ config ARM ...@@ -13,7 +13,7 @@ config ARM
select RTC_LIB select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION select SYS_SUPPORTS_APM_EMULATION
select GENERIC_ATOMIC64 if (!CPU_32v6K) select GENERIC_ATOMIC64 if (!CPU_32v6K)
select HAVE_OPROFILE select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL) select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_KRETPROBES if (HAVE_KPROBES)
...@@ -181,28 +181,6 @@ config ARM_L1_CACHE_SHIFT_6 ...@@ -181,28 +181,6 @@ config ARM_L1_CACHE_SHIFT_6
help help
Setting ARM L1 cache line size to 64 Bytes. Setting ARM L1 cache line size to 64 Bytes.
if OPROFILE
config OPROFILE_ARMV6
def_bool y
depends on CPU_V6 && !SMP
select OPROFILE_ARM11_CORE
config OPROFILE_MPCORE
def_bool y
depends on CPU_V6 && SMP
select OPROFILE_ARM11_CORE
config OPROFILE_ARM11_CORE
bool
config OPROFILE_ARMV7
def_bool y
depends on CPU_V7 && !SMP
bool
endif
config VECTORS_BASE config VECTORS_BASE
hex hex
default 0xffff0000 if MMU || CPU_HIGH_VECTOR default 0xffff0000 if MMU || CPU_HIGH_VECTOR
...@@ -1334,7 +1312,7 @@ config HIGHPTE ...@@ -1334,7 +1312,7 @@ config HIGHPTE
config HW_PERF_EVENTS config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events" bool "Enable hardware performance counter support for perf events"
depends on PERF_EVENTS && CPU_HAS_PMU && (CPU_V6 || CPU_V7) depends on PERF_EVENTS && CPU_HAS_PMU
default y default y
help help
Enable hardware performance counter support for perf events. If Enable hardware performance counter support for perf events. If
......
arch/arm/oprofile/Makefile
浏览文件 @ fe166148
...@@ -6,9 +6,4 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ ...@@ -6,9 +6,4 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
oprofilefs.o oprofile_stats.o \ oprofilefs.o oprofile_stats.o \
timer_int.o ) timer_int.o )
oprofile-y := $(DRIVER_OBJS) common.o backtrace.o oprofile-y := $(DRIVER_OBJS) common.o
oprofile-$(CONFIG_CPU_XSCALE) += op_model_xscale.o
oprofile-$(CONFIG_OPROFILE_ARM11_CORE) += op_model_arm11_core.o
oprofile-$(CONFIG_OPROFILE_ARMV6) += op_model_v6.o
oprofile-$(CONFIG_OPROFILE_MPCORE) += op_model_mpcore.o
oprofile-$(CONFIG_OPROFILE_ARMV7) += op_model_v7.o
arch/arm/oprofile/backtrace.c 已删除 100644 → 0
浏览文件 @ 8c1fc96f
/*
* Arm specific backtracing code for oprofile
*
* Copyright 2005 Openedhand Ltd.
*
* Author: Richard Purdie <rpurdie@openedhand.com>
*
* Based on i386 oprofile backtrace code by John Levon, David Smith
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/oprofile.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/uaccess.h>
#include <asm/ptrace.h>
#include <asm/stacktrace.h>
static int report_trace(struct stackframe *frame, void *d)
{
unsigned int *depth = d;
if (*depth) {
oprofile_add_trace(frame->pc);
(*depth)--;
}
return *depth == 0;
}
/*
* The registers we're interested in are at the end of the variable
* length saved register structure. The fp points at the end of this
* structure so the address of this struct is:
* (struct frame_tail *)(xxx->fp)-1
*/
struct frame_tail {
struct frame_tail *fp;
unsigned long sp;
unsigned long lr;
} __attribute__((packed));
static struct frame_tail* user_backtrace(struct frame_tail *tail)
{
struct frame_tail buftail[2];
/* Also check accessibility of one struct frame_tail beyond */
if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
return NULL;
if (__copy_from_user_inatomic(buftail, tail, sizeof(buftail)))
return NULL;
oprofile_add_trace(buftail[0].lr);
/* frame pointers should strictly progress back up the stack
* (towards higher addresses) */
if (tail >= buftail[0].fp)
return NULL;
return buftail[0].fp-1;
}
void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
{
struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1;
if (!user_mode(regs)) {
struct stackframe frame;
frame.fp = regs->ARM_fp;
frame.sp = regs->ARM_sp;
frame.lr = regs->ARM_lr;
frame.pc = regs->ARM_pc;
walk_stackframe(&frame, report_trace, &depth);
return;
}
while (depth-- && tail && !((unsigned long) tail & 3))
tail = user_backtrace(tail);
}
arch/arm/oprofile/op_arm_model.h 已删除 100644 → 0
浏览文件 @ 8c1fc96f
/**
* @file op_arm_model.h
* interface to ARM machine specific operations
*
* @remark Copyright 2004 Oprofile Authors
* @remark Read the file COPYING
*
* @author Zwane Mwaikambo
*/
#ifndef OP_ARM_MODEL_H
#define OP_ARM_MODEL_H
struct op_arm_model_spec {
int (*init)(void);
unsigned int num_counters;
int (*setup_ctrs)(void);
int (*start)(void);
void (*stop)(void);
char *name;
};
#ifdef CONFIG_CPU_XSCALE
extern struct op_arm_model_spec op_xscale_spec;
#endif
extern struct op_arm_model_spec op_armv6_spec;
extern struct op_arm_model_spec op_mpcore_spec;
extern struct op_arm_model_spec op_armv7_spec;
extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
extern void op_arm_exit(void);
#endif /* OP_ARM_MODEL_H */
arch/arm/oprofile/op_counter.h 已删除 100644 → 0
浏览文件 @ 8c1fc96f
/**
* @file op_counter.h
*
* @remark Copyright 2004 Oprofile Authors
* @remark Read the file COPYING
*
* @author Zwane Mwaikambo
*/
#ifndef OP_COUNTER_H
#define OP_COUNTER_H
/* Per performance monitor configuration as set via
* oprofilefs.
*/
struct op_counter_config {
unsigned long count;
unsigned long enabled;
unsigned long event;
unsigned long unit_mask;
unsigned long kernel;
unsigned long user;
};
extern struct op_counter_config *counter_config;
#endif /* OP_COUNTER_H */
arch/arm/oprofile/op_model_arm11_core.c 已删除 100644 → 0
浏览文件 @ 8c1fc96f
/**
* @file op_model_arm11_core.c
* ARM11 Event Monitor Driver
* @remark Copyright 2004 ARM SMP Development Team
*/
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/smp.h>
#include "op_counter.h"
#include "op_arm_model.h"
#include "op_model_arm11_core.h"
/*
* ARM11 PMU support
*/
static inline void arm11_write_pmnc(u32 val)
{
/* upper 4bits and 7, 11 are write-as-0 */
val &= 0x0ffff77f;
asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r" (val));
}
static inline u32 arm11_read_pmnc(void)
{
u32 val;
asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r" (val));
return val;
}
static void arm11_reset_counter(unsigned int cnt)
{
u32 val = -(u32)counter_config[CPU_COUNTER(smp_processor_id(), cnt)].count;
switch (cnt) {
case CCNT:
asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r" (val));
break;
case PMN0:
asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r" (val));
break;
case PMN1:
asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r" (val));
break;
}
}
int arm11_setup_pmu(void)
{
unsigned int cnt;
u32 pmnc;
if (arm11_read_pmnc() & PMCR_E) {
printk(KERN_ERR "oprofile: CPU%u PMU still enabled when setup new event counter.\n", smp_processor_id());
return -EBUSY;
}
/* initialize PMNC, reset overflow, D bit, C bit and P bit. */
arm11_write_pmnc(PMCR_OFL_PMN0 | PMCR_OFL_PMN1 | PMCR_OFL_CCNT |
PMCR_C | PMCR_P);
for (pmnc = 0, cnt = PMN0; cnt <= CCNT; cnt++) {
unsigned long event;
if (!counter_config[CPU_COUNTER(smp_processor_id(), cnt)].enabled)
continue;
event = counter_config[CPU_COUNTER(smp_processor_id(), cnt)].event & 255;
/*
* Set event (if destined for PMNx counters)
*/
if (cnt == PMN0) {
pmnc |= event << 20;
} else if (cnt == PMN1) {
pmnc |= event << 12;
}
/*
* We don't need to set the event if it's a cycle count
* Enable interrupt for this counter
*/
pmnc |= PMCR_IEN_PMN0 << cnt;
arm11_reset_counter(cnt);
}
arm11_write_pmnc(pmnc);
return 0;
}
int arm11_start_pmu(void)
{
arm11_write_pmnc(arm11_read_pmnc() | PMCR_E);
return 0;
}
int arm11_stop_pmu(void)
{
unsigned int cnt;
arm11_write_pmnc(arm11_read_pmnc() & ~PMCR_E);
for (cnt = PMN0; cnt <= CCNT; cnt++)
arm11_reset_counter(cnt);
return 0;
}
/*
* CPU counters' IRQ handler (one IRQ per CPU)
*/
static irqreturn_t arm11_pmu_interrupt(int irq, void *arg)
{
struct pt_regs *regs = get_irq_regs();
unsigned int cnt;
u32 pmnc;
pmnc = arm11_read_pmnc();
for (cnt = PMN0; cnt <= CCNT; cnt++) {
if ((pmnc & (PMCR_OFL_PMN0 << cnt)) && (pmnc & (PMCR_IEN_PMN0 << cnt))) {
arm11_reset_counter(cnt);
oprofile_add_sample(regs, CPU_COUNTER(smp_processor_id(), cnt));
}
}
/* Clear counter flag(s) */
arm11_write_pmnc(pmnc);
return IRQ_HANDLED;
}
int arm11_request_interrupts(const int *irqs, int nr)
{
unsigned int i;
int ret = 0;
for(i = 0; i < nr; i++) {
ret = request_irq(irqs[i], arm11_pmu_interrupt, IRQF_DISABLED, "CP15 PMU", NULL);
if (ret != 0) {
printk(KERN_ERR "oprofile: unable to request IRQ%u for MPCORE-EM\n",
irqs[i]);
break;
}
}
if (i != nr)
while (i-- != 0)
free_irq(irqs[i], NULL);
return ret;
}
void arm11_release_interrupts(const int *irqs, int nr)
{
unsigned int i;
for (i = 0; i < nr; i++)
free_irq(irqs[i], NULL);
}
arch/arm/oprofile/op_model_arm11_core.h 已删除 100644 → 0
浏览文件 @ 8c1fc96f
/**
* @file op_model_arm11_core.h
* ARM11 Event Monitor Driver
* @remark Copyright 2004 ARM SMP Development Team
* @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
* @remark Copyright 2000-2004 MontaVista Software Inc
* @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
* @remark Copyright 2004 Intel Corporation
* @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
* @remark Copyright 2004 Oprofile Authors
*
* @remark Read the file COPYING
*
* @author Zwane Mwaikambo
*/
#ifndef OP_MODEL_ARM11_CORE_H
#define OP_MODEL_ARM11_CORE_H
/*
* Per-CPU PMCR
*/
#define PMCR_E (1 << 0) /* Enable */
#define PMCR_P (1 << 1) /* Count reset */
#define PMCR_C (1 << 2) /* Cycle counter reset */
#define PMCR_D (1 << 3) /* Cycle counter counts every 64th cpu cycle */
#define PMCR_IEN_PMN0 (1 << 4) /* Interrupt enable count reg 0 */
#define PMCR_IEN_PMN1 (1 << 5) /* Interrupt enable count reg 1 */
#define PMCR_IEN_CCNT (1 << 6) /* Interrupt enable cycle counter */
#define PMCR_OFL_PMN0 (1 << 8) /* Count reg 0 overflow */
#define PMCR_OFL_PMN1 (1 << 9) /* Count reg 1 overflow */
#define PMCR_OFL_CCNT (1 << 10) /* Cycle counter overflow */
#define PMN0 0
#define PMN1 1
#define CCNT 2
#define CPU_COUNTER(cpu, counter) ((cpu) * 3 + (counter))
int arm11_setup_pmu(void);
int arm11_start_pmu(void);
int arm11_stop_pmu(void);
int arm11_request_interrupts(const int *, int);
void arm11_release_interrupts(const int *, int);
#endif
arch/arm/oprofile/op_model_mpcore.c 已删除 100644 → 0
浏览文件 @ 8c1fc96f
/**
* @file op_model_mpcore.c
* MPCORE Event Monitor Driver
* @remark Copyright 2004 ARM SMP Development Team
* @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
* @remark Copyright 2000-2004 MontaVista Software Inc
* @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
* @remark Copyright 2004 Intel Corporation
* @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
* @remark Copyright 2004 Oprofile Authors
*
* @remark Read the file COPYING
*
* @author Zwane Mwaikambo
*
* Counters:
* 0: PMN0 on CPU0, per-cpu configurable event counter
* 1: PMN1 on CPU0, per-cpu configurable event counter
* 2: CCNT on CPU0
* 3: PMN0 on CPU1
* 4: PMN1 on CPU1
* 5: CCNT on CPU1
* 6: PMN0 on CPU1
* 7: PMN1 on CPU1
* 8: CCNT on CPU1
* 9: PMN0 on CPU1
* 10: PMN1 on CPU1
* 11: CCNT on CPU1
* 12-19: configurable SCU event counters
*/
/* #define DEBUG */
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/sched.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board-eb.h>
#include <asm/system.h>
#include <asm/pmu.h>
#include "op_counter.h"
#include "op_arm_model.h"
#include "op_model_arm11_core.h"
#include "op_model_mpcore.h"
/*
* MPCore SCU event monitor support
*/
#define SCU_EVENTMONITORS_VA_BASE __io_address(REALVIEW_EB11MP_SCU_BASE + 0x10)
/*
* Bitmask of used SCU counters
*/
static unsigned int scu_em_used;
static const struct pmu_irqs *pmu_irqs;
/*
* 2 helper fns take a counter number from 0-7 (not the userspace-visible counter number)
*/
static inline void scu_reset_counter(struct eventmonitor __iomem *emc, unsigned int n)
{
writel(-(u32)counter_config[SCU_COUNTER(n)].count, &emc->MC[n]);
}
static inline void scu_set_event(struct eventmonitor __iomem *emc, unsigned int n, u32 event)
{
event &= 0xff;
writeb(event, &emc->MCEB[n]);
}
/*
* SCU counters' IRQ handler (one IRQ per counter => 2 IRQs per CPU)
*/
static irqreturn_t scu_em_interrupt(int irq, void *arg)
{
struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
unsigned int cnt;
cnt = irq - IRQ_EB11MP_PMU_SCU0;
oprofile_add_sample(get_irq_regs(), SCU_COUNTER(cnt));
scu_reset_counter(emc, cnt);
/* Clear overflow flag for this counter */
writel(1 << (cnt + 16), &emc->PMCR);
return IRQ_HANDLED;
}
/* Configure just the SCU counters that the user has requested */
static void scu_setup(void)
{
struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
unsigned int i;
scu_em_used = 0;
for (i = 0; i < NUM_SCU_COUNTERS; i++) {
if (counter_config[SCU_COUNTER(i)].enabled &&
counter_config[SCU_COUNTER(i)].event) {
scu_set_event(emc, i, 0); /* disable counter for now */
scu_em_used |= 1 << i;
}
}
}
static int scu_start(void)
{
struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
unsigned int temp, i;
unsigned long event;
int ret = 0;
/*
* request the SCU counter interrupts that we need
*/
for (i = 0; i < NUM_SCU_COUNTERS; i++) {
if (scu_em_used & (1 << i)) {
ret = request_irq(IRQ_EB11MP_PMU_SCU0 + i, scu_em_interrupt, IRQF_DISABLED, "SCU PMU", NULL);
if (ret) {
printk(KERN_ERR "oprofile: unable to request IRQ%u for SCU Event Monitor\n",
IRQ_EB11MP_PMU_SCU0 + i);
goto err_free_scu;
}
}
}
/*
* clear overflow and enable interrupt for all used counters
*/
temp = readl(&emc->PMCR);
for (i = 0; i < NUM_SCU_COUNTERS; i++) {
if (scu_em_used & (1 << i)) {
scu_reset_counter(emc, i);
event = counter_config[SCU_COUNTER(i)].event;
scu_set_event(emc, i, event);
/* clear overflow/interrupt */
temp |= 1 << (i + 16);
/* enable interrupt*/
temp |= 1 << (i + 8);
}
}
/* Enable all 8 counters */
temp |= PMCR_E;
writel(temp, &emc->PMCR);
return 0;
err_free_scu:
while (i--)
free_irq(IRQ_EB11MP_PMU_SCU0 + i, NULL);
return ret;
}
static void scu_stop(void)
{
struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
unsigned int temp, i;
/* Disable counter interrupts */
/* Don't disable all 8 counters (with the E bit) as they may be in use */
temp = readl(&emc->PMCR);
for (i = 0; i < NUM_SCU_COUNTERS; i++) {
if (scu_em_used & (1 << i))
temp &= ~(1 << (i + 8));
}
writel(temp, &emc->PMCR);
/* Free counter interrupts and reset counters */
for (i = 0; i < NUM_SCU_COUNTERS; i++) {
if (scu_em_used & (1 << i)) {
scu_reset_counter(emc, i);
free_irq(IRQ_EB11MP_PMU_SCU0 + i, NULL);
}
}
}
struct em_function_data {
int (*fn)(void);
int ret;
};
static void em_func(void *data)
{
struct em_function_data *d = data;
int ret = d->fn();
if (ret)
d->ret = ret;
}
static int em_call_function(int (*fn)(void))
{
struct em_function_data data;
data.fn = fn;
data.ret = 0;
preempt_disable();
smp_call_function(em_func, &data, 1);
em_func(&data);
preempt_enable();
return data.ret;
}
/*
* Glue to stick the individual ARM11 PMUs and the SCU
* into the oprofile framework.
*/
static int em_setup_ctrs(void)
{
int ret;
/* Configure CPU counters by cross-calling to the other CPUs */
ret = em_call_function(arm11_setup_pmu);
if (ret == 0)
scu_setup();
return 0;
}
static int em_start(void)
{
int ret;
pmu_irqs = reserve_pmu();
if (IS_ERR(pmu_irqs)) {
ret = PTR_ERR(pmu_irqs);
goto out;
}
ret = arm11_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
if (ret == 0) {
em_call_function(arm11_start_pmu);
ret = scu_start();
if (ret) {
arm11_release_interrupts(pmu_irqs->irqs,
pmu_irqs->num_irqs);
} else {
release_pmu(pmu_irqs);
pmu_irqs = NULL;
}
}
out:
return ret;
}
static void em_stop(void)
{
em_call_function(arm11_stop_pmu);
arm11_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
scu_stop();
release_pmu(pmu_irqs);
}
/*
* Why isn't there a function to route an IRQ to a specific CPU in
* genirq?
*/
static void em_route_irq(int irq, unsigned int cpu)
{
struct irq_desc *desc = irq_desc + irq;
const struct cpumask *mask = cpumask_of(cpu);
spin_lock_irq(&desc->lock);
cpumask_copy(desc->affinity, mask);
desc->chip->set_affinity(irq, mask);
spin_unlock_irq(&desc->lock);
}
static int em_setup(void)
{
/*
* Send SCU PMU interrupts to the "owner" CPU.
*/
em_route_irq(IRQ_EB11MP_PMU_SCU0, 0);
em_route_irq(IRQ_EB11MP_PMU_SCU1, 0);
em_route_irq(IRQ_EB11MP_PMU_SCU2, 1);
em_route_irq(IRQ_EB11MP_PMU_SCU3, 1);
em_route_irq(IRQ_EB11MP_PMU_SCU4, 2);
em_route_irq(IRQ_EB11MP_PMU_SCU5, 2);
em_route_irq(IRQ_EB11MP_PMU_SCU6, 3);
em_route_irq(IRQ_EB11MP_PMU_SCU7, 3);
return init_pmu();
}
struct op_arm_model_spec op_mpcore_spec = {
.init = em_setup,
.num_counters = MPCORE_NUM_COUNTERS,
.setup_ctrs = em_setup_ctrs,
.start = em_start,
.stop = em_stop,
.name = "arm/mpcore",
};
arch/arm/oprofile/op_model_mpcore.h 已删除 100644 → 0
浏览文件 @ 8c1fc96f
/**
* @file op_model_mpcore.c
* MPCORE Event Monitor Driver
* @remark Copyright 2004 ARM SMP Development Team
* @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
* @remark Copyright 2000-2004 MontaVista Software Inc
* @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
* @remark Copyright 2004 Intel Corporation
* @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
* @remark Copyright 2004 Oprofile Authors
*
* @remark Read the file COPYING
*
* @author Zwane Mwaikambo
*/
#ifndef OP_MODEL_MPCORE_H
#define OP_MODEL_MPCORE_H
struct eventmonitor {
unsigned long PMCR;
unsigned char MCEB[8];
unsigned long MC[8];
};
/*
* List of userspace counter numbers: note that the structure is important.
* The code relies on CPUn's counters being CPU0's counters + 3n
* and on CPU0's counters starting at 0
*/
#define COUNTER_CPU0_PMN0 0
#define COUNTER_CPU0_PMN1 1
#define COUNTER_CPU0_CCNT 2
#define COUNTER_CPU1_PMN0 3
#define COUNTER_CPU1_PMN1 4
#define COUNTER_CPU1_CCNT 5
#define COUNTER_CPU2_PMN0 6
#define COUNTER_CPU2_PMN1 7
#define COUNTER_CPU2_CCNT 8
#define COUNTER_CPU3_PMN0 9
#define COUNTER_CPU3_PMN1 10
#define COUNTER_CPU3_CCNT 11
#define COUNTER_SCU_MN0 12
#define COUNTER_SCU_MN1 13
#define COUNTER_SCU_MN2 14
#define COUNTER_SCU_MN3 15
#define COUNTER_SCU_MN4 16
#define COUNTER_SCU_MN5 17
#define COUNTER_SCU_MN6 18
#define COUNTER_SCU_MN7 19
#define NUM_SCU_COUNTERS 8
#define SCU_COUNTER(number) ((number) + COUNTER_SCU_MN0)
#define MPCORE_NUM_COUNTERS SCU_COUNTER(NUM_SCU_COUNTERS)
#endif
arch/arm/oprofile/op_model_v6.c 已删除 100644 → 0
浏览文件 @ 8c1fc96f
/**
* @file op_model_v6.c
* ARM11 Performance Monitor Driver
*
* Based on op_model_xscale.c
*
* @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
* @remark Copyright 2000-2004 MontaVista Software Inc
* @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
* @remark Copyright 2004 Intel Corporation
* @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
* @remark Copyright 2004 OProfile Authors
*
* @remark Read the file COPYING
*
* @author Tony Lindgren <tony@atomide.com>
*/
/* #define DEBUG */
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/sched.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/pmu.h>
#include "op_counter.h"
#include "op_arm_model.h"
#include "op_model_arm11_core.h"
static const struct pmu_irqs *pmu_irqs;
static void armv6_pmu_stop(void)
{
arm11_stop_pmu();
arm11_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
release_pmu(pmu_irqs);
pmu_irqs = NULL;
}
static int armv6_pmu_start(void)
{
int ret;
pmu_irqs = reserve_pmu();
if (IS_ERR(pmu_irqs)) {
ret = PTR_ERR(pmu_irqs);
goto out;
}
ret = arm11_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
if (ret >= 0) {
ret = arm11_start_pmu();
} else {
release_pmu(pmu_irqs);
pmu_irqs = NULL;
}
out:
return ret;
}
static int armv6_detect_pmu(void)
{
return 0;
}
struct op_arm_model_spec op_armv6_spec = {
.init = armv6_detect_pmu,
.num_counters = 3,
.setup_ctrs = arm11_setup_pmu,
.start = armv6_pmu_start,
.stop = armv6_pmu_stop,
.name = "arm/armv6",
};
arch/arm/oprofile/op_model_v7.c 已删除 100644 → 0
浏览文件 @ 8c1fc96f
/**
* op_model_v7.c
* ARM V7 (Cortex A8) Event Monitor Driver
*
* Copyright 2008 Jean Pihet <jpihet@mvista.com>
* Copyright 2004 ARM SMP Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/smp.h>
#include <asm/pmu.h>
#include "op_counter.h"
#include "op_arm_model.h"
#include "op_model_v7.h"
/* #define DEBUG */
/*
* ARM V7 PMNC support
*/
static u32 cnt_en[CNTMAX];
static inline void armv7_pmnc_write(u32 val)
{
val &= PMNC_MASK;
asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r" (val));
}
static inline u32 armv7_pmnc_read(void)
{
u32 val;
asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
return val;
}
static inline u32 armv7_pmnc_enable_counter(unsigned int cnt)
{
u32 val;
if (cnt >= CNTMAX) {
printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
" %d\n", smp_processor_id(), cnt);
return -1;
}
if (cnt == CCNT)
val = CNTENS_C;
else
val = (1 << (cnt - CNT0));
val &= CNTENS_MASK;
asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
return cnt;
}
static inline u32 armv7_pmnc_disable_counter(unsigned int cnt)
{
u32 val;
if (cnt >= CNTMAX) {
printk(KERN_ERR "oprofile: CPU%u disabling wrong PMNC counter"
" %d\n", smp_processor_id(), cnt);
return -1;
}
if (cnt == CCNT)
val = CNTENC_C;
else
val = (1 << (cnt - CNT0));
val &= CNTENC_MASK;
asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
return cnt;
}
static inline u32 armv7_pmnc_enable_intens(unsigned int cnt)
{
u32 val;
if (cnt >= CNTMAX) {
printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
" interrupt enable %d\n", smp_processor_id(), cnt);
return -1;
}
if (cnt == CCNT)
val = INTENS_C;
else
val = (1 << (cnt - CNT0));
val &= INTENS_MASK;
asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
return cnt;
}
static inline u32 armv7_pmnc_getreset_flags(void)
{
u32 val;
/* Read */
asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
/* Write to clear flags */
val &= FLAG_MASK;
asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
return val;
}
static inline int armv7_pmnc_select_counter(unsigned int cnt)
{
u32 val;
if ((cnt == CCNT) || (cnt >= CNTMAX)) {
printk(KERN_ERR "oprofile: CPU%u selecting wrong PMNC counteri"
" %d\n", smp_processor_id(), cnt);
return -1;
}
val = (cnt - CNT0) & SELECT_MASK;
asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
return cnt;
}
static inline void armv7_pmnc_write_evtsel(unsigned int cnt, u32 val)
{
if (armv7_pmnc_select_counter(cnt) == cnt) {
val &= EVTSEL_MASK;
asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
}
}
static void armv7_pmnc_reset_counter(unsigned int cnt)
{
u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
u32 val = -(u32)counter_config[cpu_cnt].count;
switch (cnt) {
case CCNT:
armv7_pmnc_disable_counter(cnt);
asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (val));
if (cnt_en[cnt] != 0)
armv7_pmnc_enable_counter(cnt);
break;
case CNT0:
case CNT1:
case CNT2:
case CNT3:
armv7_pmnc_disable_counter(cnt);
if (armv7_pmnc_select_counter(cnt) == cnt)
asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (val));
if (cnt_en[cnt] != 0)
armv7_pmnc_enable_counter(cnt);
break;
default:
printk(KERN_ERR "oprofile: CPU%u resetting wrong PMNC counter"
" %d\n", smp_processor_id(), cnt);
break;
}
}
int armv7_setup_pmnc(void)
{
unsigned int cnt;
if (armv7_pmnc_read() & PMNC_E) {
printk(KERN_ERR "oprofile: CPU%u PMNC still enabled when setup"
" new event counter.\n", smp_processor_id());
return -EBUSY;
}
/* Initialize & Reset PMNC: C bit and P bit */
armv7_pmnc_write(PMNC_P | PMNC_C);
for (cnt = CCNT; cnt < CNTMAX; cnt++) {
unsigned long event;
u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
/*
* Disable counter
*/
armv7_pmnc_disable_counter(cnt);
cnt_en[cnt] = 0;
if (!counter_config[cpu_cnt].enabled)
continue;
event = counter_config[cpu_cnt].event & 255;
/*
* Set event (if destined for PMNx counters)
* We don't need to set the event if it's a cycle count
*/
if (cnt != CCNT)
armv7_pmnc_write_evtsel(cnt, event);
/*
* Enable interrupt for this counter
*/
armv7_pmnc_enable_intens(cnt);
/*
* Reset counter
*/
armv7_pmnc_reset_counter(cnt);
/*
* Enable counter
*/
armv7_pmnc_enable_counter(cnt);
cnt_en[cnt] = 1;
}
return 0;
}
static inline void armv7_start_pmnc(void)
{
armv7_pmnc_write(armv7_pmnc_read() | PMNC_E);
}
static inline void armv7_stop_pmnc(void)
{
armv7_pmnc_write(armv7_pmnc_read() & ~PMNC_E);
}
/*
* CPU counters' IRQ handler (one IRQ per CPU)
*/
static irqreturn_t armv7_pmnc_interrupt(int irq, void *arg)
{
struct pt_regs *regs = get_irq_regs();
unsigned int cnt;
u32 flags;
/*
* Stop IRQ generation
*/
armv7_stop_pmnc();
/*
* Get and reset overflow status flags
*/
flags = armv7_pmnc_getreset_flags();
/*
* Cycle counter
*/
if (flags & FLAG_C) {
u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), CCNT);
armv7_pmnc_reset_counter(CCNT);
oprofile_add_sample(regs, cpu_cnt);
}
/*
* PMNC counters 0:3
*/
for (cnt = CNT0; cnt < CNTMAX; cnt++) {
if (flags & (1 << (cnt - CNT0))) {
u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
armv7_pmnc_reset_counter(cnt);
oprofile_add_sample(regs, cpu_cnt);
}
}
/*
* Allow IRQ generation
*/
armv7_start_pmnc();
return IRQ_HANDLED;
}
int armv7_request_interrupts(const int *irqs, int nr)
{
unsigned int i;
int ret = 0;
for (i = 0; i < nr; i++) {
ret = request_irq(irqs[i], armv7_pmnc_interrupt,
IRQF_DISABLED, "CP15 PMNC", NULL);
if (ret != 0) {
printk(KERN_ERR "oprofile: unable to request IRQ%u"
" for ARMv7\n",
irqs[i]);
break;
}
}
if (i != nr)
while (i-- != 0)
free_irq(irqs[i], NULL);
return ret;
}
void armv7_release_interrupts(const int *irqs, int nr)
{
unsigned int i;
for (i = 0; i < nr; i++)
free_irq(irqs[i], NULL);
}
#ifdef DEBUG
static void armv7_pmnc_dump_regs(void)
{
u32 val;
unsigned int cnt;
printk(KERN_INFO "PMNC registers dump:\n");
asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
printk(KERN_INFO "PMNC =0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
printk(KERN_INFO "CNTENS=0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
printk(KERN_INFO "INTENS=0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
printk(KERN_INFO "FLAGS =0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
printk(KERN_INFO "SELECT=0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
printk(KERN_INFO "CCNT =0x%08x\n", val);
for (cnt = CNT0; cnt < CNTMAX; cnt++) {
armv7_pmnc_select_counter(cnt);
asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
printk(KERN_INFO "CNT[%d] count =0x%08x\n", cnt-CNT0, val);
asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", cnt-CNT0, val);
}
}
#endif
static const struct pmu_irqs *pmu_irqs;
static void armv7_pmnc_stop(void)
{
#ifdef DEBUG
armv7_pmnc_dump_regs();
#endif
armv7_stop_pmnc();
armv7_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
release_pmu(pmu_irqs);
pmu_irqs = NULL;
}
static int armv7_pmnc_start(void)
{
int ret;
pmu_irqs = reserve_pmu();
if (IS_ERR(pmu_irqs))
return PTR_ERR(pmu_irqs);
#ifdef DEBUG
armv7_pmnc_dump_regs();
#endif
ret = armv7_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
if (ret >= 0) {
armv7_start_pmnc();
} else {
release_pmu(pmu_irqs);
pmu_irqs = NULL;
}
return ret;
}
static int armv7_detect_pmnc(void)
{
return 0;
}
struct op_arm_model_spec op_armv7_spec = {
.init = armv7_detect_pmnc,
.num_counters = 5,
.setup_ctrs = armv7_setup_pmnc,
.start = armv7_pmnc_start,
.stop = armv7_pmnc_stop,
.name = "arm/armv7",
};
arch/arm/oprofile/op_model_v7.h 已删除 100644 → 0
浏览文件 @ 8c1fc96f
/**
* op_model_v7.h
* ARM v7 (Cortex A8) Event Monitor Driver
*
* Copyright 2008 Jean Pihet <jpihet@mvista.com>
* Copyright 2004 ARM SMP Development Team
* Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
* Copyright 2000-2004 MontaVista Software Inc
* Copyright 2004 Dave Jiang <dave.jiang@intel.com>
* Copyright 2004 Intel Corporation
* Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
* Copyright 2004 Oprofile Authors
*
* Read the file COPYING
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef OP_MODEL_V7_H
#define OP_MODEL_V7_H
/*
* Per-CPU PMNC: config reg
*/
#define PMNC_E (1 << 0) /* Enable all counters */
#define PMNC_P (1 << 1) /* Reset all counters */
#define PMNC_C (1 << 2) /* Cycle counter reset */
#define PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */
#define PMNC_X (1 << 4) /* Export to ETM */
#define PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/
#define PMNC_MASK 0x3f /* Mask for writable bits */
/*
* Available counters
*/
#define CCNT 0
#define CNT0 1
#define CNT1 2
#define CNT2 3
#define CNT3 4
#define CNTMAX 5
#define CPU_COUNTER(cpu, counter) ((cpu) * CNTMAX + (counter))
/*
* CNTENS: counters enable reg
*/
#define CNTENS_P0 (1 << 0)
#define CNTENS_P1 (1 << 1)
#define CNTENS_P2 (1 << 2)
#define CNTENS_P3 (1 << 3)
#define CNTENS_C (1 << 31)
#define CNTENS_MASK 0x8000000f /* Mask for writable bits */
/*
* CNTENC: counters disable reg
*/
#define CNTENC_P0 (1 << 0)
#define CNTENC_P1 (1 << 1)
#define CNTENC_P2 (1 << 2)
#define CNTENC_P3 (1 << 3)
#define CNTENC_C (1 << 31)
#define CNTENC_MASK 0x8000000f /* Mask for writable bits */
/*
* INTENS: counters overflow interrupt enable reg
*/
#define INTENS_P0 (1 << 0)
#define INTENS_P1 (1 << 1)
#define INTENS_P2 (1 << 2)
#define INTENS_P3 (1 << 3)
#define INTENS_C (1 << 31)
#define INTENS_MASK 0x8000000f /* Mask for writable bits */
/*
* EVTSEL: Event selection reg
*/
#define EVTSEL_MASK 0x7f /* Mask for writable bits */
/*
* SELECT: Counter selection reg
*/
#define SELECT_MASK 0x1f /* Mask for writable bits */
/*
* FLAG: counters overflow flag status reg
*/
#define FLAG_P0 (1 << 0)
#define FLAG_P1 (1 << 1)
#define FLAG_P2 (1 << 2)
#define FLAG_P3 (1 << 3)
#define FLAG_C (1 << 31)
#define FLAG_MASK 0x8000000f /* Mask for writable bits */
int armv7_setup_pmu(void);
int armv7_start_pmu(void);
int armv7_stop_pmu(void);
int armv7_request_interrupts(const int *, int);
void armv7_release_interrupts(const int *, int);
#endif
arch/arm/oprofile/op_model_xscale.c 已删除 100644 → 0
浏览文件 @ 8c1fc96f
/**
* @file op_model_xscale.c
* XScale Performance Monitor Driver
*
* @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
* @remark Copyright 2000-2004 MontaVista Software Inc
* @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
* @remark Copyright 2004 Intel Corporation
* @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
* @remark Copyright 2004 OProfile Authors
*
* @remark Read the file COPYING
*
* @author Zwane Mwaikambo
*/
/* #define DEBUG */
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/sched.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/cputype.h>
#include <asm/pmu.h>
#include "op_counter.h"
#include "op_arm_model.h"
#define PMU_ENABLE 0x001 /* Enable counters */
#define PMN_RESET 0x002 /* Reset event counters */
#define CCNT_RESET 0x004 /* Reset clock counter */
#define PMU_RESET (CCNT_RESET | PMN_RESET)
#define PMU_CNT64 0x008 /* Make CCNT count every 64th cycle */
/*
* Different types of events that can be counted by the XScale PMU
* as used by Oprofile userspace. Here primarily for documentation
* purposes.
*/
#define EVT_ICACHE_MISS 0x00
#define EVT_ICACHE_NO_DELIVER 0x01
#define EVT_DATA_STALL 0x02
#define EVT_ITLB_MISS 0x03
#define EVT_DTLB_MISS 0x04
#define EVT_BRANCH 0x05
#define EVT_BRANCH_MISS 0x06
#define EVT_INSTRUCTION 0x07
#define EVT_DCACHE_FULL_STALL 0x08
#define EVT_DCACHE_FULL_STALL_CONTIG 0x09
#define EVT_DCACHE_ACCESS 0x0A
#define EVT_DCACHE_MISS 0x0B
#define EVT_DCACE_WRITE_BACK 0x0C
#define EVT_PC_CHANGED 0x0D
#define EVT_BCU_REQUEST 0x10
#define EVT_BCU_FULL 0x11
#define EVT_BCU_DRAIN 0x12
#define EVT_BCU_ECC_NO_ELOG 0x14
#define EVT_BCU_1_BIT_ERR 0x15
#define EVT_RMW 0x16
/* EVT_CCNT is not hardware defined */
#define EVT_CCNT 0xFE
#define EVT_UNUSED 0xFF
struct pmu_counter {
volatile unsigned long ovf;
unsigned long reset_counter;
};
enum { CCNT, PMN0, PMN1, PMN2, PMN3, MAX_COUNTERS };
static struct pmu_counter results[MAX_COUNTERS];
/*
* There are two versions of the PMU in current XScale processors
* with differing register layouts and number of performance counters.
* e.g. IOP32x is xsc1 whilst IOP33x is xsc2.
* We detect which register layout to use in xscale_detect_pmu()
*/
enum { PMU_XSC1, PMU_XSC2 };
struct pmu_type {
int id;
char *name;
int num_counters;
unsigned int int_enable;
unsigned int cnt_ovf[MAX_COUNTERS];
unsigned int int_mask[MAX_COUNTERS];
};
static struct pmu_type pmu_parms[] = {
{
.id = PMU_XSC1,
.name = "arm/xscale1",
.num_counters = 3,
.int_mask = { [PMN0] = 0x10, [PMN1] = 0x20,
[CCNT] = 0x40 },
.cnt_ovf = { [CCNT] = 0x400, [PMN0] = 0x100,
[PMN1] = 0x200},
},
{
.id = PMU_XSC2,
.name = "arm/xscale2",
.num_counters = 5,
.int_mask = { [CCNT] = 0x01, [PMN0] = 0x02,
[PMN1] = 0x04, [PMN2] = 0x08,
[PMN3] = 0x10 },
.cnt_ovf = { [CCNT] = 0x01, [PMN0] = 0x02,
[PMN1] = 0x04, [PMN2] = 0x08,
[PMN3] = 0x10 },
},
};
static struct pmu_type *pmu;
static void write_pmnc(u32 val)
{
if (pmu->id == PMU_XSC1) {
/* upper 4bits and 7, 11 are write-as-0 */
val &= 0xffff77f;
__asm__ __volatile__ ("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
} else {
/* bits 4-23 are write-as-0, 24-31 are write ignored */
val &= 0xf;
__asm__ __volatile__ ("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
}
}
static u32 read_pmnc(void)
{
u32 val;
if (pmu->id == PMU_XSC1)
__asm__ __volatile__ ("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
else {
__asm__ __volatile__ ("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
/* bits 1-2 and 4-23 are read-unpredictable */
val &= 0xff000009;
}
return val;
}
static u32 __xsc1_read_counter(int counter)
{
u32 val = 0;
switch (counter) {
case CCNT:
__asm__ __volatile__ ("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
break;
case PMN0:
__asm__ __volatile__ ("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
break;
case PMN1:
__asm__ __volatile__ ("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
break;
}
return val;
}
static u32 __xsc2_read_counter(int counter)
{
u32 val = 0;
switch (counter) {
case CCNT:
__asm__ __volatile__ ("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
break;
case PMN0:
__asm__ __volatile__ ("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
break;
case PMN1:
__asm__ __volatile__ ("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
break;
case PMN2:
__asm__ __volatile__ ("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
break;
case PMN3:
__asm__ __volatile__ ("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
break;
}
return val;
}
static u32 read_counter(int counter)
{
u32 val;
if (pmu->id == PMU_XSC1)
val = __xsc1_read_counter(counter);
else
val = __xsc2_read_counter(counter);
return val;
}
static void __xsc1_write_counter(int counter, u32 val)
{
switch (counter) {
case CCNT:
__asm__ __volatile__ ("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
break;
case PMN0:
__asm__ __volatile__ ("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
break;
case PMN1:
__asm__ __volatile__ ("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
break;
}
}
static void __xsc2_write_counter(int counter, u32 val)
{
switch (counter) {
case CCNT:
__asm__ __volatile__ ("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
break;
case PMN0:
__asm__ __volatile__ ("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
break;
case PMN1:
__asm__ __volatile__ ("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
break;
case PMN2:
__asm__ __volatile__ ("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
break;
case PMN3:
__asm__ __volatile__ ("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
break;
}
}
static void write_counter(int counter, u32 val)
{
if (pmu->id == PMU_XSC1)
__xsc1_write_counter(counter, val);
else
__xsc2_write_counter(counter, val);
}
static int xscale_setup_ctrs(void)
{
u32 evtsel, pmnc;
int i;
for (i = CCNT; i < MAX_COUNTERS; i++) {
if (counter_config[i].enabled)
continue;
counter_config[i].event = EVT_UNUSED;
}
switch (pmu->id) {
case PMU_XSC1:
pmnc = (counter_config[PMN1].event << 20) | (counter_config[PMN0].event << 12);
pr_debug("xscale_setup_ctrs: pmnc: %#08x\n", pmnc);
write_pmnc(pmnc);
break;
case PMU_XSC2:
evtsel = counter_config[PMN0].event | (counter_config[PMN1].event << 8) |
(counter_config[PMN2].event << 16) | (counter_config[PMN3].event << 24);
pr_debug("xscale_setup_ctrs: evtsel %#08x\n", evtsel);
__asm__ __volatile__ ("mcr p14, 0, %0, c8, c1, 0" : : "r" (evtsel));
break;
}
for (i = CCNT; i < MAX_COUNTERS; i++) {
if (counter_config[i].event == EVT_UNUSED) {
counter_config[i].event = 0;
pmu->int_enable &= ~pmu->int_mask[i];
continue;
}
results[i].reset_counter = counter_config[i].count;
write_counter(i, -(u32)counter_config[i].count);
pmu->int_enable |= pmu->int_mask[i];
pr_debug("xscale_setup_ctrs: counter%d %#08x from %#08lx\n", i,
read_counter(i), counter_config[i].count);
}
return 0;
}
static void inline __xsc1_check_ctrs(void)
{
int i;
u32 pmnc = read_pmnc();
/* NOTE: there's an A stepping errata that states if an overflow */
/* bit already exists and another occurs, the previous */
/* Overflow bit gets cleared. There's no workaround. */
/* Fixed in B stepping or later */
/* Write the value back to clear the overflow flags. Overflow */
/* flags remain in pmnc for use below */
write_pmnc(pmnc & ~PMU_ENABLE);
for (i = CCNT; i <= PMN1; i++) {
if (!(pmu->int_mask[i] & pmu->int_enable))
continue;
if (pmnc & pmu->cnt_ovf[i])
results[i].ovf++;
}
}
static void inline __xsc2_check_ctrs(void)
{
int i;
u32 flag = 0, pmnc = read_pmnc();
pmnc &= ~PMU_ENABLE;
write_pmnc(pmnc);
/* read overflow flag register */
__asm__ __volatile__ ("mrc p14, 0, %0, c5, c1, 0" : "=r" (flag));
for (i = CCNT; i <= PMN3; i++) {
if (!(pmu->int_mask[i] & pmu->int_enable))
continue;
if (flag & pmu->cnt_ovf[i])
results[i].ovf++;
}
/* writeback clears overflow bits */
__asm__ __volatile__ ("mcr p14, 0, %0, c5, c1, 0" : : "r" (flag));
}
static irqreturn_t xscale_pmu_interrupt(int irq, void *arg)
{
int i;
u32 pmnc;
if (pmu->id == PMU_XSC1)
__xsc1_check_ctrs();
else
__xsc2_check_ctrs();
for (i = CCNT; i < MAX_COUNTERS; i++) {
if (!results[i].ovf)
continue;
write_counter(i, -(u32)results[i].reset_counter);
oprofile_add_sample(get_irq_regs(), i);
results[i].ovf--;
}
pmnc = read_pmnc() | PMU_ENABLE;
write_pmnc(pmnc);
return IRQ_HANDLED;
}
static const struct pmu_irqs *pmu_irqs;
static void xscale_pmu_stop(void)
{
u32 pmnc = read_pmnc();
pmnc &= ~PMU_ENABLE;
write_pmnc(pmnc);
free_irq(pmu_irqs->irqs[0], results);
release_pmu(pmu_irqs);
pmu_irqs = NULL;
}
static int xscale_pmu_start(void)
{
int ret;
u32 pmnc;
pmu_irqs = reserve_pmu();
if (IS_ERR(pmu_irqs))
return PTR_ERR(pmu_irqs);
pmnc = read_pmnc();
ret = request_irq(pmu_irqs->irqs[0], xscale_pmu_interrupt,
IRQF_DISABLED, "XScale PMU", (void *)results);
if (ret < 0) {
printk(KERN_ERR "oprofile: unable to request IRQ%d for XScale PMU\n",
pmu_irqs->irqs[0]);
release_pmu(pmu_irqs);
pmu_irqs = NULL;
return ret;
}
if (pmu->id == PMU_XSC1)
pmnc |= pmu->int_enable;
else {
__asm__ __volatile__ ("mcr p14, 0, %0, c4, c1, 0" : : "r" (pmu->int_enable));
pmnc &= ~PMU_CNT64;
}
pmnc |= PMU_ENABLE;
write_pmnc(pmnc);
pr_debug("xscale_pmu_start: pmnc: %#08x mask: %08x\n", pmnc, pmu->int_enable);
return 0;
}
static int xscale_detect_pmu(void)
{
int ret = 0;
u32 id;
id = (read_cpuid(CPUID_ID) >> 13) & 0x7;
switch (id) {
case 1:
pmu = &pmu_parms[PMU_XSC1];
break;
case 2:
pmu = &pmu_parms[PMU_XSC2];
break;
default:
ret = -ENODEV;
break;
}
if (!ret) {
op_xscale_spec.name = pmu->name;
op_xscale_spec.num_counters = pmu->num_counters;
pr_debug("xscale_detect_pmu: detected %s PMU\n", pmu->name);
}
return ret;
}
struct op_arm_model_spec op_xscale_spec = {
.init = xscale_detect_pmu,
.setup_ctrs = xscale_setup_ctrs,
.start = xscale_pmu_start,
.stop = xscale_pmu_stop,
};
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或