提交 fdde7084 编写于 作者: H Holger Schurig 提交者: David S. Miller

[PATCH] libertas: remove adapter->{rx,tx}antenna

There was nowhere any code that used the values of those
variables.

This patch also removes two static functions that are now unused.
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 4d4ce1ad
......@@ -570,26 +570,6 @@ static int wlan_cmd_802_11_rf_tx_power(wlan_private * priv,
return 0;
}
static int wlan_cmd_802_11_rf_antenna(wlan_private * priv,
struct cmd_ds_command *cmd,
u16 cmd_action, void *pdata_buf)
{
struct cmd_ds_802_11_rf_antenna *rant = &cmd->params.rant;
lbs_deb_enter(LBS_DEB_CMD);
cmd->command = cpu_to_le16(CMD_802_11_RF_ANTENNA);
cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_rf_antenna) +
S_DS_GEN);
rant->action = cpu_to_le16(cmd_action);
if ((cmd_action == CMD_ACT_SET_RX) || (cmd_action == CMD_ACT_SET_TX)) {
rant->antennamode = cpu_to_le16((u16) (*(u32 *) pdata_buf));
}
lbs_deb_leave(LBS_DEB_CMD);
return 0;
}
static int wlan_cmd_802_11_rate_adapt_rateset(wlan_private * priv,
struct cmd_ds_command *cmd,
u16 cmd_action)
......@@ -1252,11 +1232,6 @@ int libertas_prepare_and_send_command(wlan_private * priv,
ret = wlan_cmd_802_11_radio_control(priv, cmdptr, cmd_action);
break;
case CMD_802_11_RF_ANTENNA:
ret = wlan_cmd_802_11_rf_antenna(priv, cmdptr,
cmd_action, pdata_buf);
break;
case CMD_802_11_DATA_RATE:
ret = wlan_cmd_802_11_data_rate(priv, cmdptr, cmd_action);
break;
......
......@@ -383,27 +383,6 @@ static int wlan_ret_802_11_rf_tx_power(wlan_private * priv,
return 0;
}
static int wlan_ret_802_11_rf_antenna(wlan_private * priv,
struct cmd_ds_command *resp)
{
struct cmd_ds_802_11_rf_antenna *pAntenna = &resp->params.rant;
wlan_adapter *adapter = priv->adapter;
u16 action = le16_to_cpu(pAntenna->action);
lbs_deb_enter(LBS_DEB_CMD);
if (action == CMD_ACT_GET_RX)
adapter->rxantennamode = le16_to_cpu(pAntenna->antennamode);
if (action == CMD_ACT_GET_TX)
adapter->txantennamode = le16_to_cpu(pAntenna->antennamode);
lbs_deb_cmd("RF_ANT_RESP: action 0x%x, mode 0x%04x\n",
action, le16_to_cpu(pAntenna->antennamode));
lbs_deb_leave(LBS_DEB_CMD);
return 0;
}
static int wlan_ret_802_11_rate_adapt_rateset(wlan_private * priv,
struct cmd_ds_command *resp)
{
......@@ -620,9 +599,6 @@ static inline int handle_cmd_response(u16 respcmd,
spin_unlock_irqrestore(&adapter->driver_lock, flags);
break;
case CMD_RET(CMD_802_11_RF_ANTENNA):
ret = wlan_ret_802_11_rf_antenna(priv, resp);
break;
case CMD_RET(CMD_MAC_MULTICAST_ADR):
case CMD_RET(CMD_MAC_CONTROL):
......
......@@ -284,9 +284,6 @@ struct _wlan_adapter {
/** control G rates */
u8 adhoc_grate_enabled;
u32 txantenna;
u32 rxantenna;
u32 fragthsd;
u32 rtsthsd;
......@@ -337,9 +334,6 @@ struct _wlan_adapter {
u8 wpa_ie[MAX_WPA_IE_LEN];
u8 wpa_ie_len;
u16 rxantennamode;
u16 txantennamode;
/** Requested Signal Strength*/
u16 bcn_avg_factor;
u16 data_avg_factor;
......
......@@ -1049,8 +1049,6 @@ static void wlan_init_adapter(wlan_private * priv)
CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON;
adapter->radioon = RADIO_ON;
adapter->txantenna = RF_ANTENNA_2;
adapter->rxantenna = RF_ANTENNA_AUTO;
adapter->auto_rate = 1;
adapter->cur_rate = 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册