ARM: tegra: move resume vector define to irammap.h

irammap.h's purpose is to define the layout/usage of IRAM. As such,
TEGRA_IRAM_CODE_AREA should have been added there rather than iomap.h.
Move the define, and rename it something more descriptive.

Cc: Joseph Lo <josephl@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>

arch/arm/mach-tegra/iomap.h

@@ -24,8 +24,6 @@
 #define TEGRA_IRAM_BASE			0x40000000
 #define TEGRA_IRAM_SIZE			SZ_256K
 
-#define TEGRA_IRAM_CODE_AREA		(TEGRA_IRAM_BASE + SZ_4K)
-
 #define TEGRA_HOST1X_BASE		0x50000000
 #define TEGRA_HOST1X_SIZE		0x24000
 

arch/arm/mach-tegra/irammap.h

@@ -23,4 +23,10 @@
 #define TEGRA_IRAM_RESET_HANDLER_OFFSET	0
 #define TEGRA_IRAM_RESET_HANDLER_SIZE	SZ_1K
 
+/*
+ * This area is used for LPx resume vector, only while LPx power state is
+ * active. At other times, the AVP may use this area for arbitrary purposes
+ */
+#define TEGRA_IRAM_LPx_RESUME_AREA	(TEGRA_IRAM_BASE + SZ_4K)
+
 #endif

arch/arm/mach-tegra/pm.c

@@ -263,10 +263,10 @@ static void tegra_suspend_enter_lp1(void)
 	tegra_pmc_suspend();
 
 	/* copy the reset vector & SDRAM shutdown code into IRAM */
-	memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_CODE_AREA),
-		iram_save_size);
-	memcpy(IO_ADDRESS(TEGRA_IRAM_CODE_AREA), tegra_lp1_iram.start_addr,
+	memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
 		iram_save_size);
+	memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
+		tegra_lp1_iram.start_addr, iram_save_size);
 
 	*((u32 *)tegra_cpu_lp1_mask) = 1;
 }
@@ -276,7 +276,7 @@ static void tegra_suspend_exit_lp1(void)
 	tegra_pmc_resume();
 
 	/* restore IRAM */
-	memcpy(IO_ADDRESS(TEGRA_IRAM_CODE_AREA), iram_save_addr,
+	memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_addr,
 		iram_save_size);
 
 	*(u32 *)tegra_cpu_lp1_mask = 0;

arch/arm/mach-tegra/reset.c

@@ -82,7 +82,7 @@ void __init tegra_cpu_reset_handler_init(void)
 
 #ifdef CONFIG_PM_SLEEP
 	__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP1] =
-		TEGRA_IRAM_CODE_AREA;
+		TEGRA_IRAM_LPx_RESUME_AREA;
 	__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] =
 		virt_to_phys((void *)tegra_resume);
 #endif

arch/arm/mach-tegra/sleep-tegra20.S

@@ -25,6 +25,7 @@
 #include <asm/cp15.h>
 #include <asm/cache.h>
 
+#include "irammap.h"
 #include "sleep.h"
 #include "flowctrl.h"
 
@@ -235,7 +236,7 @@ ENTRY(tegra20_sleep_core_finish)
 	mov32	r0, tegra20_tear_down_core
 	mov32	r1, tegra20_iram_start
 	sub	r0, r0, r1
-	mov32	r1, TEGRA_IRAM_CODE_AREA
+	mov32	r1, TEGRA_IRAM_LPx_RESUME_AREA
 	add	r0, r0, r1
 
 	mov	pc, r3
@@ -328,7 +329,7 @@ tegra20_iram_start:
  * The physical address of tegra_resume expected to be stored in
  * PMC_SCRATCH41.
  *
- * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_CODE_AREA.
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
  */
 ENTRY(tegra20_lp1_reset)
 	/*

arch/arm/mach-tegra/sleep-tegra30.S

@@ -20,6 +20,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/cache.h>
 
+#include "irammap.h"
 #include "fuse.h"
 #include "sleep.h"
 #include "flowctrl.h"
@@ -262,7 +263,7 @@ ENTRY(tegra30_sleep_core_finish)
 	mov32	r0, tegra30_tear_down_core
 	mov32	r1, tegra30_iram_start
 	sub	r0, r0, r1
-	mov32	r1, TEGRA_IRAM_CODE_AREA
+	mov32	r1, TEGRA_IRAM_LPx_RESUME_AREA
 	add	r0, r0, r1
 
 	mov	pc, r3
@@ -314,7 +315,7 @@ tegra30_iram_start:
  * The physical address of tegra_resume expected to be stored in
  * PMC_SCRATCH41.
  *
- * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_CODE_AREA.
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
  */
 ENTRY(tegra30_lp1_reset)
 	/*