提交 fc611a1a 编写于 作者: R Russell King 提交者: Russell King

[ARM] Don't include mach-types.h unnecessarily

It's pointless to include mach-types.h if you're not going to use
anything from it.  These references were removed as a result of:

grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type'
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 d0877904
......@@ -27,7 +27,6 @@
#include <linux/spinlock.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
......
......@@ -17,7 +17,6 @@
#include <asm/system.h>
#include <asm/io.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include "leds.h"
/*
......
......@@ -27,7 +27,6 @@ unsigned long iop3xx_pcibios_min_mem = 0;
/*
* Default power-off for EP80219
*/
#include <asm/mach-types.h>
static inline void ep80219_send_to_pic(__u8 c) {
}
......
......@@ -23,7 +23,6 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/mach-types.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
......
......@@ -23,7 +23,6 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/mach-types.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
......
......@@ -21,7 +21,6 @@
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>
/*
......
......@@ -21,7 +21,6 @@
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>
/*
......
......@@ -21,7 +21,6 @@
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>
/*
......
......@@ -21,7 +21,6 @@
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>
/*
......
......@@ -30,7 +30,6 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
......
......@@ -28,7 +28,6 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/mach/pci.h>
......
......@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/module.h>
#include <asm/mach-types.h>
#include <asm/arch/akita.h>
#include <asm/arch/corgi.h>
#include <asm/arch/hardware.h>
......
......@@ -40,7 +40,6 @@
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include "devs.h"
#include "usb-simtec.h"
......
......@@ -30,7 +30,6 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_clcd.h>
#include <asm/hardware/arm_timer.h>
......
......@@ -29,7 +29,6 @@
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
/*
* these spaces are mapped using the following base registers:
......
......@@ -25,7 +25,6 @@
#include <asm/mach/map.h>
#include <asm/hardware/clock.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/arch/board.h>
......
......@@ -21,7 +21,6 @@
#include <linux/err.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/system.h>
......
......@@ -33,7 +33,6 @@
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/mux.h>
#include <asm/arch/usb.h>
......
......@@ -39,7 +39,6 @@
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/mach/flash.h>
#include <asm/arch/map.h>
......
......@@ -30,7 +30,6 @@
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/flash.h>
#include <linux/reboot.h>
......
......@@ -26,7 +26,6 @@
#include <linux/ioport.h>
#include <linux/device.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/mach/flash.h>
#include <linux/reboot.h>
......
......@@ -42,7 +42,6 @@
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/flash.h>
#include <asm/arch/tc.h>
......
......@@ -21,7 +21,6 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/concat.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <asm/mach/flash.h>
......
......@@ -58,7 +58,6 @@
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/hardware/clock.h>
#include <asm/arch/regs-nand.h>
......
......@@ -22,7 +22,6 @@
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
#include <asm/arch/mux.h>
......
......@@ -82,8 +82,6 @@
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include <asm/mach-types.h>
/* structures */
struct s3c24xx_uart_info {
......
......@@ -17,7 +17,6 @@
*/
#include <asm/hardware.h>
#include <asm/mach-types.h>
extern int usb_disabled(void);
......
......@@ -20,7 +20,6 @@
*/
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/hardware/clock.h>
#include <asm/arch/usb-control.h>
......
......@@ -19,7 +19,6 @@
#include <linux/fb.h>
#include <linux/backlight.h>
#include <asm/mach-types.h>
#include <asm/arch/sharpsl.h>
#define CORGI_DEFAULT_INTENSITY 0x1f
......
......@@ -36,7 +36,6 @@
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/uaccess.h>
#include <asm/arch/imxfb.h>
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册