提交 fafc79ef 编写于 作者: L Lothar Waßmann 提交者: Philipp Zabel

drm/imx: convey the pixelclk-active and de-active flags from DT to the ipu-di driver

The 'de-active' and 'pixelclk-active' DT properties are evaluated
by of_parse_display_timing() called from  of_get_drm_display_mode(),
but later lost in the conversion from videomode.flags to
drm_display_mode.flags.
Enhance of_get_drm_display_mode() to also return the bus flags in a
separate variable, so that they can be passed on to the ipu-di
driver.
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
上级 d72daa0d
...@@ -687,7 +687,8 @@ EXPORT_SYMBOL_GPL(drm_bus_flags_from_videomode); ...@@ -687,7 +687,8 @@ EXPORT_SYMBOL_GPL(drm_bus_flags_from_videomode);
* 0 on success, a negative errno code when no of videomode node was found. * 0 on success, a negative errno code when no of videomode node was found.
*/ */
int of_get_drm_display_mode(struct device_node *np, int of_get_drm_display_mode(struct device_node *np,
struct drm_display_mode *dmode, int index) struct drm_display_mode *dmode, u32 *bus_flags,
int index)
{ {
struct videomode vm; struct videomode vm;
int ret; int ret;
...@@ -697,6 +698,8 @@ int of_get_drm_display_mode(struct device_node *np, ...@@ -697,6 +698,8 @@ int of_get_drm_display_mode(struct device_node *np,
return ret; return ret;
drm_display_mode_from_videomode(&vm, dmode); drm_display_mode_from_videomode(&vm, dmode);
if (bus_flags)
drm_bus_flags_from_videomode(&vm, bus_flags);
pr_debug("%s: got %dx%d display mode from %s\n", pr_debug("%s: got %dx%d display mode from %s\n",
of_node_full_name(np), vm.hactive, vm.vactive, np->name); of_node_full_name(np), vm.hactive, vm.vactive, np->name);
......
...@@ -66,6 +66,7 @@ struct imx_ldb_channel { ...@@ -66,6 +66,7 @@ struct imx_ldb_channel {
struct drm_display_mode mode; struct drm_display_mode mode;
int mode_valid; int mode_valid;
u32 bus_format; u32 bus_format;
u32 bus_flags;
}; };
static inline struct imx_ldb_channel *con_to_imx_ldb_ch(struct drm_connector *c) static inline struct imx_ldb_channel *con_to_imx_ldb_ch(struct drm_connector *c)
...@@ -379,8 +380,13 @@ static int imx_ldb_encoder_atomic_check(struct drm_encoder *encoder, ...@@ -379,8 +380,13 @@ static int imx_ldb_encoder_atomic_check(struct drm_encoder *encoder,
u32 bus_format = imx_ldb_ch->bus_format; u32 bus_format = imx_ldb_ch->bus_format;
/* Bus format description in DT overrides connector display info. */ /* Bus format description in DT overrides connector display info. */
if (!bus_format && di->num_bus_formats) if (!bus_format && di->num_bus_formats) {
bus_format = di->bus_formats[0]; bus_format = di->bus_formats[0];
imx_crtc_state->bus_flags = di->bus_flags;
} else {
bus_format = imx_ldb_ch->bus_format;
imx_crtc_state->bus_flags = imx_ldb_ch->bus_flags;
}
switch (bus_format) { switch (bus_format) {
case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG: case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
imx_crtc_state->bus_format = MEDIA_BUS_FMT_RGB666_1X18; imx_crtc_state->bus_format = MEDIA_BUS_FMT_RGB666_1X18;
...@@ -674,6 +680,7 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) ...@@ -674,6 +680,7 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
/* fallback to display-timings node */ /* fallback to display-timings node */
ret = of_get_drm_display_mode(child, ret = of_get_drm_display_mode(child,
&channel->mode, &channel->mode,
&channel->bus_flags,
OF_USE_NATIVE_MODE); OF_USE_NATIVE_MODE);
if (!ret) if (!ret)
channel->mode_valid = 1; channel->mode_valid = 1;
......
...@@ -33,6 +33,7 @@ struct imx_parallel_display { ...@@ -33,6 +33,7 @@ struct imx_parallel_display {
void *edid; void *edid;
int edid_len; int edid_len;
u32 bus_format; u32 bus_format;
u32 bus_flags;
struct drm_display_mode mode; struct drm_display_mode mode;
struct drm_panel *panel; struct drm_panel *panel;
struct drm_bridge *bridge; struct drm_bridge *bridge;
...@@ -80,6 +81,7 @@ static int imx_pd_connector_get_modes(struct drm_connector *connector) ...@@ -80,6 +81,7 @@ static int imx_pd_connector_get_modes(struct drm_connector *connector)
return -EINVAL; return -EINVAL;
ret = of_get_drm_display_mode(np, &imxpd->mode, ret = of_get_drm_display_mode(np, &imxpd->mode,
&imxpd->bus_flags,
OF_USE_NATIVE_MODE); OF_USE_NATIVE_MODE);
if (ret) if (ret)
return ret; return ret;
...@@ -125,11 +127,13 @@ static int imx_pd_encoder_atomic_check(struct drm_encoder *encoder, ...@@ -125,11 +127,13 @@ static int imx_pd_encoder_atomic_check(struct drm_encoder *encoder,
struct drm_display_info *di = &conn_state->connector->display_info; struct drm_display_info *di = &conn_state->connector->display_info;
struct imx_parallel_display *imxpd = enc_to_imxpd(encoder); struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
imx_crtc_state->bus_flags = di->bus_flags; if (!imxpd->bus_format && di->num_bus_formats) {
if (!imxpd->bus_format && di->num_bus_formats) imx_crtc_state->bus_flags = di->bus_flags;
imx_crtc_state->bus_format = di->bus_formats[0]; imx_crtc_state->bus_format = di->bus_formats[0];
else } else {
imx_crtc_state->bus_flags = imxpd->bus_flags;
imx_crtc_state->bus_format = imxpd->bus_format; imx_crtc_state->bus_format = imxpd->bus_format;
}
imx_crtc_state->di_hsync_pin = 2; imx_crtc_state->di_hsync_pin = 2;
imx_crtc_state->di_vsync_pin = 3; imx_crtc_state->di_vsync_pin = 3;
......
...@@ -459,7 +459,7 @@ void drm_display_mode_to_videomode(const struct drm_display_mode *dmode, ...@@ -459,7 +459,7 @@ void drm_display_mode_to_videomode(const struct drm_display_mode *dmode,
struct videomode *vm); struct videomode *vm);
void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags); void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags);
int of_get_drm_display_mode(struct device_node *np, int of_get_drm_display_mode(struct device_node *np,
struct drm_display_mode *dmode, struct drm_display_mode *dmode, u32 *bus_flags,
int index); int index);
void drm_mode_set_name(struct drm_display_mode *mode); void drm_mode_set_name(struct drm_display_mode *mode);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册