mtd: delete SBC82xx/SBC8560 MTD mapping support

The SBC8260 support was dropped back when we moved from ppc to
powerpc.  We are now also dropping the support for the EOL SBC8560,
so we can also delete this mapping support, as they were the only
users of it.

Artem: also remove the symbol from the Makefile.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

drivers/mtd/maps/Kconfig

@@ -447,18 +447,6 @@ config MTD_UCLINUX
 	help
 	  Map driver to support image based filesystems for uClinux.
 
-config MTD_WRSBC8260
-	tristate "Map driver for WindRiver PowerQUICC II MPC82xx board"
-	depends on (SBC82xx || SBC8560)
-	select MTD_MAP_BANK_WIDTH_4
-	select MTD_MAP_BANK_WIDTH_1
-	select MTD_CFI_I1
-	select MTD_CFI_I4
-	help
-	  Map driver for WindRiver PowerQUICC II MPC82xx board. Drives
-	  all three flash regions on CS0, CS1 and CS6 if they are configured
-	  correctly by the boot loader.
-
 config MTD_DMV182
         tristate "Map driver for Dy-4 SVME/DMV-182 board."
         depends on DMV182

drivers/mtd/maps/Makefile

@@ -47,7 +47,6 @@ obj-$(CONFIG_MTD_SCB2_FLASH)	+= scb2_flash.o
 obj-$(CONFIG_MTD_H720X)		+= h720x-flash.o
 obj-$(CONFIG_MTD_IXP4XX)	+= ixp4xx.o
 obj-$(CONFIG_MTD_IXP2000)	+= ixp2000.o
-obj-$(CONFIG_MTD_WRSBC8260)	+= wr_sbc82xx_flash.o
 obj-$(CONFIG_MTD_DMV182)	+= dmv182.o
 obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
 obj-$(CONFIG_MTD_INTEL_VR_NOR)	+= intel_vr_nor.o

drivers/mtd/maps/wr_sbc82xx_flash.c

-/*
- * Map for flash chips on Wind River PowerQUICC II SBC82xx board.
- *
- * Copyright (C) 2004 Red Hat, Inc.
- *
- * Author: David Woodhouse <dwmw2@infradead.org>
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/immap_cpm2.h>
-
-static struct mtd_info *sbcmtd[3];
-
-struct map_info sbc82xx_flash_map[3] = {
-	{.name = "Boot flash"},
-	{.name = "Alternate boot flash"},
-	{.name = "User flash"}
-};
-
-static struct mtd_partition smallflash_parts[] = {
-	{
-		.name =		"space",
-		.size =		0x100000,
-		.offset =	0,
-	}, {
-		.name =		"bootloader",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	MTDPART_OFS_APPEND,
-	}
-};
-
-static struct mtd_partition bigflash_parts[] = {
-	{
-		.name =		"bootloader",
-		.size =		0x00100000,
-		.offset =	0,
-	}, {
-		.name =		"file system",
-		.size =		0x01f00000,
-		.offset =	MTDPART_OFS_APPEND,
-	}, {
-		.name =		"boot config",
-		.size =		0x00100000,
-		.offset =	MTDPART_OFS_APPEND,
-	}, {
-		.name =		"space",
-		.size =		0x01f00000,
-		.offset =	MTDPART_OFS_APPEND,
-	}
-};
-
-static const char *part_probes[] __initconst = {"cmdlinepart", "RedBoot", NULL};
-
-#define init_sbc82xx_one_flash(map, br, or)			\
-do {								\
-	(map).phys = (br & 1) ? (br & 0xffff8000) : 0;		\
-	(map).size = (br & 1) ? (~(or & 0xffff8000) + 1) : 0;	\
-	switch (br & 0x00001800) {				\
-	case 0x00000000:					\
-	case 0x00000800:	(map).bankwidth = 1;	break;	\
-	case 0x00001000:	(map).bankwidth = 2;	break;	\
-	case 0x00001800:	(map).bankwidth = 4;	break;	\
-	}							\
-} while (0);
-
-static int __init init_sbc82xx_flash(void)
-{
-	volatile memctl_cpm2_t *mc = &cpm2_immr->im_memctl;
-	int bigflash;
-	int i;
-
-#ifdef CONFIG_SBC8560
-	mc = ioremap(0xff700000 + 0x5000, sizeof(memctl_cpm2_t));
-#else
-	mc = &cpm2_immr->im_memctl;
-#endif
-
-	bigflash = 1;
-	if ((mc->memc_br0 & 0x00001800) == 0x00001800)
-		bigflash = 0;
-
-	init_sbc82xx_one_flash(sbc82xx_flash_map[0], mc->memc_br0, mc->memc_or0);
-	init_sbc82xx_one_flash(sbc82xx_flash_map[1], mc->memc_br6, mc->memc_or6);
-	init_sbc82xx_one_flash(sbc82xx_flash_map[2], mc->memc_br1, mc->memc_or1);
-
-#ifdef CONFIG_SBC8560
-	iounmap((void *) mc);
-#endif
-
-	for (i=0; i<3; i++) {
-		int8_t flashcs[3] = { 0, 6, 1 };
-		int nr_parts;
-		struct mtd_partition *defparts;
-
-		printk(KERN_NOTICE "PowerQUICC II %s (%ld MiB on CS%d",
-		       sbc82xx_flash_map[i].name,
-		       (sbc82xx_flash_map[i].size >> 20),
-		       flashcs[i]);
-		if (!sbc82xx_flash_map[i].phys) {
-			/* We know it can't be at zero. */
-			printk("): disabled by bootloader.\n");
-			continue;
-		}
-		printk(" at %08lx)\n",  sbc82xx_flash_map[i].phys);
-
-		sbc82xx_flash_map[i].virt = ioremap(sbc82xx_flash_map[i].phys,
-						    sbc82xx_flash_map[i].size);
-
-		if (!sbc82xx_flash_map[i].virt) {
-			printk("Failed to ioremap\n");
-			continue;
-		}
-
-		simple_map_init(&sbc82xx_flash_map[i]);
-
-		sbcmtd[i] = do_map_probe("cfi_probe", &sbc82xx_flash_map[i]);
-
-		if (!sbcmtd[i])
-			continue;
-
-		sbcmtd[i]->owner = THIS_MODULE;
-
-		/* No partitioning detected. Use default */
-		if (i == 2) {
-			defparts = NULL;
-			nr_parts = 0;
-		} else if (i == bigflash) {
-			defparts = bigflash_parts;
-			nr_parts = ARRAY_SIZE(bigflash_parts);
-		} else {
-			defparts = smallflash_parts;
-			nr_parts = ARRAY_SIZE(smallflash_parts);
-		}
-
-		mtd_device_parse_register(sbcmtd[i], part_probes, NULL,
-					  defparts, nr_parts);
-	}
-	return 0;
-}
-
-static void __exit cleanup_sbc82xx_flash(void)
-{
-	int i;
-
-	for (i=0; i<3; i++) {
-		if (!sbcmtd[i])
-			continue;
-
-		mtd_device_unregister(sbcmtd[i]);
-
-		map_destroy(sbcmtd[i]);
-
-		iounmap((void *)sbc82xx_flash_map[i].virt);
-		sbc82xx_flash_map[i].virt = 0;
-	}
-}
-
-module_init(init_sbc82xx_flash);
-module_exit(cleanup_sbc82xx_flash);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("Flash map driver for WindRiver PowerQUICC II");