提交 fa917052 编写于 作者: M Milo Kim 提交者: Lee Jones

mfd: tps65217: Make an interrupt handler simpler

Rework the IRQ handler by using HW IRQ number and status bit.

Each HW IRQ number is matched with TPS65217 register layout[*].
(USB IRQ number is 0, AC is 1, Push button is 2)

When an interrupt is enabled, mask bit should be cleared (unmasked).
If an interrupt is disabled, then mask bit should be set (masked).
This mask value is updated into the TPS65217 register in irq_sync_unlock().

Mask bit and interrupt status bit can be handled with HW IRQ number.
Eventually, additional IRQ data, 'tps65217_irqs[]' and the function,
'irq_to_tps65217_irq()' are not necessary.

[*] TPS65217 interrupt register layout

 Bit7  6     5     4     3    2     1     0
----------------------------------------------
| x | PBM | ACM | USBM | x | PBI | ACI | USBI

PBM:  Push button status change interrupt mask
ACM:  AC interrupt mask
USBM: USB power status change interrupt mask
PBI:  Push button status change interrupt
ACI:  AC power status change interrupt
USBI: USB power status change interrupt
x:    Not used
Signed-off-by: NMilo Kim <woogyom.kim@gmail.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
上级 6d2c2b9f
......@@ -42,26 +42,6 @@ static struct resource pb_resources[] = {
DEFINE_RES_IRQ_NAMED(TPS65217_IRQ_PB, "PB"),
};
struct tps65217_irq {
int mask;
int interrupt;
};
static const struct tps65217_irq tps65217_irqs[] = {
[TPS65217_IRQ_PB] = {
.mask = TPS65217_INT_PBM,
.interrupt = TPS65217_INT_PBI,
},
[TPS65217_IRQ_AC] = {
.mask = TPS65217_INT_ACM,
.interrupt = TPS65217_INT_ACI,
},
[TPS65217_IRQ_USB] = {
.mask = TPS65217_INT_USBM,
.interrupt = TPS65217_INT_USBI,
},
};
static void tps65217_irq_lock(struct irq_data *data)
{
struct tps65217 *tps = irq_data_get_irq_chip_data(data);
......@@ -74,34 +54,28 @@ static void tps65217_irq_sync_unlock(struct irq_data *data)
struct tps65217 *tps = irq_data_get_irq_chip_data(data);
int ret;
ret = tps65217_reg_write(tps, TPS65217_REG_INT, tps->irq_mask,
TPS65217_PROTECT_NONE);
ret = tps65217_set_bits(tps, TPS65217_REG_INT, TPS65217_INT_MASK,
tps->irq_mask, TPS65217_PROTECT_NONE);
if (ret != 0)
dev_err(tps->dev, "Failed to sync IRQ masks\n");
mutex_unlock(&tps->irq_lock);
}
static inline const struct tps65217_irq *
irq_to_tps65217_irq(struct tps65217 *tps, struct irq_data *data)
{
return &tps65217_irqs[data->hwirq];
}
static void tps65217_irq_enable(struct irq_data *data)
{
struct tps65217 *tps = irq_data_get_irq_chip_data(data);
const struct tps65217_irq *irq_data = irq_to_tps65217_irq(tps, data);
u8 mask = BIT(data->hwirq) << TPS65217_INT_SHIFT;
tps->irq_mask &= ~irq_data->mask;
tps->irq_mask &= ~mask;
}
static void tps65217_irq_disable(struct irq_data *data)
{
struct tps65217 *tps = irq_data_get_irq_chip_data(data);
const struct tps65217_irq *irq_data = irq_to_tps65217_irq(tps, data);
u8 mask = BIT(data->hwirq) << TPS65217_INT_SHIFT;
tps->irq_mask |= irq_data->mask;
tps->irq_mask |= mask;
}
static struct irq_chip tps65217_irq_chip = {
......@@ -150,8 +124,8 @@ static irqreturn_t tps65217_irq_thread(int irq, void *data)
return IRQ_NONE;
}
for (i = 0; i < ARRAY_SIZE(tps65217_irqs); i++) {
if (status & tps65217_irqs[i].interrupt) {
for (i = 0; i < TPS65217_NUM_IRQ; i++) {
if (status & BIT(i)) {
handle_nested_irq(irq_find_mapping(tps->irq_domain, i));
handled = true;
}
......@@ -430,7 +404,7 @@ static int tps65217_remove(struct i2c_client *client)
unsigned int virq;
int i;
for (i = 0; i < ARRAY_SIZE(tps65217_irqs); i++) {
for (i = 0; i < TPS65217_NUM_IRQ; i++) {
virq = irq_find_mapping(tps->irq_domain, i);
if (virq)
irq_dispose_mapping(virq);
......
......@@ -79,6 +79,7 @@
#define TPS65217_INT_PBI BIT(2)
#define TPS65217_INT_ACI BIT(1)
#define TPS65217_INT_USBI BIT(0)
#define TPS65217_INT_SHIFT 4
#define TPS65217_INT_MASK (TPS65217_INT_PBM | TPS65217_INT_ACM | \
TPS65217_INT_USBM)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册