提交 fa0f2b38 编写于 作者: R Rafał Miłecki 提交者: John W. Linville

b43: N-PHY: update workarounds

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 858a455b
......@@ -1916,7 +1916,7 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
rx2tx_delays[6] = 1;
rx2tx_events[7] = 0x1F;
}
b43_nphy_set_rf_sequence(dev, 1, rx2tx_events, rx2tx_delays,
b43_nphy_set_rf_sequence(dev, 0, rx2tx_events, rx2tx_delays,
ARRAY_SIZE(rx2tx_events));
}
......@@ -1926,8 +1926,13 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
b43_phy_maskset(dev, 0x294, 0xF0FF, 0x0700);
b43_ntab_write(dev, B43_NTAB32(16, 3), 0x18D);
b43_ntab_write(dev, B43_NTAB32(16, 127), 0x18D);
if (!dev->phy.is_40mhz) {
b43_ntab_write(dev, B43_NTAB32(16, 3), 0x18D);
b43_ntab_write(dev, B43_NTAB32(16, 127), 0x18D);
} else {
b43_ntab_write(dev, B43_NTAB32(16, 3), 0x14D);
b43_ntab_write(dev, B43_NTAB32(16, 127), 0x14D);
}
b43_nphy_gain_ctl_workarounds(dev);
......@@ -1963,13 +1968,14 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
b43_ntab_write(dev, B43_NTAB32(30, 3), tmp32);
if (dev->phy.rev == 4 &&
b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
b43_radio_write(dev, B2056_TX0 | B2056_TX_GMBB_IDAC,
0x70);
b43_radio_write(dev, B2056_TX1 | B2056_TX_GMBB_IDAC,
0x70);
}
/* Dropped probably-always-true condition */
b43_phy_write(dev, 0x224, 0x03eb);
b43_phy_write(dev, 0x225, 0x03eb);
b43_phy_write(dev, 0x226, 0x0341);
......@@ -1982,6 +1988,9 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
b43_phy_write(dev, 0x22d, 0x042b);
b43_phy_write(dev, 0x22e, 0x0381);
b43_phy_write(dev, 0x22f, 0x0381);
if (dev->phy.rev >= 6 && sprom->boardflags2_lo & B43_BFL2_SINGLEANT_CCK)
; /* TODO: 0x0080000000000000 HF */
}
static void b43_nphy_workarounds_rev1_2(struct b43_wldev *dev)
......@@ -1996,6 +2005,12 @@ static void b43_nphy_workarounds_rev1_2(struct b43_wldev *dev)
u8 events2[7] = { 0x0, 0x3, 0x5, 0x4, 0x2, 0x1, 0x8 };
u8 delays2[7] = { 0x8, 0x6, 0x2, 0x4, 0x4, 0x6, 0x1 };
if (sprom->boardflags2_lo & B43_BFL2_SKWRKFEM_BRD ||
dev->dev->board_type == 0x8B) {
delays1[0] = 0x1;
delays1[5] = 0x14;
}
if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ &&
nphy->band5g_pwrgain) {
b43_radio_mask(dev, B2055_C1_TX_RF_SPARE, ~0x8);
......@@ -2007,8 +2022,10 @@ static void b43_nphy_workarounds_rev1_2(struct b43_wldev *dev)
b43_ntab_write(dev, B43_NTAB16(8, 0x00), 0x000A);
b43_ntab_write(dev, B43_NTAB16(8, 0x10), 0x000A);
b43_ntab_write(dev, B43_NTAB16(8, 0x02), 0xCDAA);
b43_ntab_write(dev, B43_NTAB16(8, 0x12), 0xCDAA);
if (dev->phy.rev < 3) {
b43_ntab_write(dev, B43_NTAB16(8, 0x02), 0xCDAA);
b43_ntab_write(dev, B43_NTAB16(8, 0x12), 0xCDAA);
}
if (dev->phy.rev < 2) {
b43_ntab_write(dev, B43_NTAB16(8, 0x08), 0x0000);
......@@ -2024,11 +2041,6 @@ static void b43_nphy_workarounds_rev1_2(struct b43_wldev *dev)
b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO2, 0x2D8);
b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301);
if (sprom->boardflags2_lo & B43_BFL2_SKWRKFEM_BRD &&
dev->dev->board_type == 0x8B) {
delays1[0] = 0x1;
delays1[5] = 0x14;
}
b43_nphy_set_rf_sequence(dev, 0, events1, delays1, 7);
b43_nphy_set_rf_sequence(dev, 1, events2, delays2, 7);
......@@ -2055,11 +2067,13 @@ static void b43_nphy_workarounds_rev1_2(struct b43_wldev *dev)
b43_phy_write(dev, B43_NPHY_PHASETR_B1, 0xCD);
b43_phy_write(dev, B43_NPHY_PHASETR_B2, 0x20);
b43_phy_mask(dev, B43_NPHY_PIL_DW1,
~B43_NPHY_PIL_DW_64QAM & 0xFFFF);
b43_phy_write(dev, B43_NPHY_TXF_20CO_S2B1, 0xB5);
b43_phy_write(dev, B43_NPHY_TXF_20CO_S2B2, 0xA4);
b43_phy_write(dev, B43_NPHY_TXF_20CO_S2B3, 0x00);
if (dev->phy.rev < 3) {
b43_phy_mask(dev, B43_NPHY_PIL_DW1,
~B43_NPHY_PIL_DW_64QAM & 0xFFFF);
b43_phy_write(dev, B43_NPHY_TXF_20CO_S2B1, 0xB5);
b43_phy_write(dev, B43_NPHY_TXF_20CO_S2B2, 0xA4);
b43_phy_write(dev, B43_NPHY_TXF_20CO_S2B3, 0x00);
}
if (dev->phy.rev == 2)
b43_phy_set(dev, B43_NPHY_FINERX2_CGC,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册