提交 f9baad02 编写于 作者: N Nathan Williams 提交者: David S. Miller

solos-pci: add GPIO support for newer versions on Geos board

dwmw2: Tidy up a little, simpler matching on which GPIO is being accessed,
       only register on newer boards, register under PCI device instead of
       duplicating them under each ATM device.
Signed-off-by: NNathan Williams <nathan@traverse.com.au>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 83c34fd0
......@@ -56,6 +56,7 @@
#define FLASH_BUSY 0x60
#define FPGA_MODE 0x5C
#define FLASH_MODE 0x58
#define GPIO_STATUS 0x54
#define TX_DMA_ADDR(port) (0x40 + (4 * (port)))
#define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
......@@ -498,6 +499,78 @@ static ssize_t console_store(struct device *dev, struct device_attribute *attr,
return err?:count;
}
struct geos_gpio_attr {
struct device_attribute attr;
int offset;
};
#define SOLOS_GPIO_ATTR(_name, _mode, _show, _store, _offset) \
struct geos_gpio_attr gpio_attr_##_name = { \
.attr = __ATTR(_name, _mode, _show, _store), \
.offset = _offset }
static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
struct solos_card *card = pci_get_drvdata(pdev);
uint32_t data32;
if (count != 1 && (count != 2 || buf[1] != '\n'))
return -EINVAL;
spin_lock_irq(&card->param_queue_lock);
data32 = ioread32(card->config_regs + GPIO_STATUS);
if (buf[0] == '1') {
data32 |= 1 << gattr->offset;
iowrite32(data32, card->config_regs + GPIO_STATUS);
} else if (buf[0] == '0') {
data32 &= ~(1 << gattr->offset);
iowrite32(data32, card->config_regs + GPIO_STATUS);
} else {
count = -EINVAL;
}
spin_lock_irq(&card->param_queue_lock);
return count;
}
static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
struct solos_card *card = pci_get_drvdata(pdev);
uint32_t data32;
data32 = ioread32(card->config_regs + GPIO_STATUS);
data32 = (data32 >> gattr->offset) & 1;
return sprintf(buf, "%d\n", data32);
}
static ssize_t hardware_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
struct solos_card *card = pci_get_drvdata(pdev);
uint32_t data32;
data32 = ioread32(card->config_regs + GPIO_STATUS);
switch (gattr->offset) {
case 0:
/* HardwareVersion */
data32 = data32 & 0x1F;
break;
case 1:
/* HardwareVariant */
data32 = (data32 >> 5) & 0x0F;
break;
}
return sprintf(buf, "%d\n", data32);
}
static DEVICE_ATTR(console, 0644, console_show, console_store);
......@@ -506,6 +579,14 @@ static DEVICE_ATTR(console, 0644, console_show, console_store);
#include "solos-attrlist.c"
static SOLOS_GPIO_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store, 9);
static SOLOS_GPIO_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store, 10);
static SOLOS_GPIO_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store, 11);
static SOLOS_GPIO_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store, 12);
static SOLOS_GPIO_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store, 13);
static SOLOS_GPIO_ATTR(PushButton, 0444, geos_gpio_show, NULL, 14);
static SOLOS_GPIO_ATTR(HardwareVersion, 0444, hardware_show, NULL, 0);
static SOLOS_GPIO_ATTR(HardwareVariant, 0444, hardware_show, NULL, 1);
#undef SOLOS_ATTR_RO
#undef SOLOS_ATTR_RW
......@@ -522,6 +603,23 @@ static struct attribute_group solos_attr_group = {
.name = "parameters",
};
static struct attribute *gpio_attrs[] = {
&gpio_attr_GPIO1.attr.attr,
&gpio_attr_GPIO2.attr.attr,
&gpio_attr_GPIO3.attr.attr,
&gpio_attr_GPIO4.attr.attr,
&gpio_attr_GPIO5.attr.attr,
&gpio_attr_PushButton.attr.attr,
&gpio_attr_HardwareVersion.attr.attr,
&gpio_attr_HardwareVariant.attr.attr,
NULL
};
static struct attribute_group gpio_attr_group = {
.attrs = gpio_attrs,
.name = "gpio",
};
static int flash_upgrade(struct solos_card *card, int chip)
{
const struct firmware *fw;
......@@ -1179,6 +1277,10 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (err)
goto out_free_irq;
if (card->fpga_version >= DMA_SUPPORTED &&
sysfs_create_group(&card->dev->dev.kobj, &gpio_attr_group))
dev_err(&card->dev->dev, "Could not register parameter group for GPIOs\n");
return 0;
out_free_irq:
......@@ -1289,6 +1391,9 @@ static void fpga_remove(struct pci_dev *dev)
iowrite32(1, card->config_regs + FPGA_MODE);
(void)ioread32(card->config_regs + FPGA_MODE);
if (card->fpga_version >= DMA_SUPPORTED)
sysfs_remove_group(&card->dev->dev.kobj, &gpio_attr_group);
atm_remove(card);
free_irq(dev->irq, card);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册