提交 f9931a4d 编写于 作者: S Sergei Shtylyov 提交者: Linus Walleij

pinctrl: sh-pfc: r8a77970: Fix pin I/O voltage control support

I've included the pin I/O voltage control into the R8A77970 PFC driver but
it was incomplete because:
- SH_PFC_PIN_CFG_IO_VOLTAGE pin flags weren't set properly;
- sh_pfc_soc_info::ioctrl_regs wasn't set at all...

Fixes: b92ac66a ("pinctrl: sh-pfc: Add R8A77970 PFC support")
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 b374c90f
......@@ -21,13 +21,15 @@
#include "core.h"
#include "sh_pfc.h"
#define CFG_FLAGS SH_PFC_PIN_CFG_DRIVE_STRENGTH
#define CPU_ALL_PORT(fn, sfx) \
PORT_GP_CFG_22(0, fn, sfx, SH_PFC_PIN_CFG_DRIVE_STRENGTH), \
PORT_GP_CFG_28(1, fn, sfx, SH_PFC_PIN_CFG_DRIVE_STRENGTH), \
PORT_GP_CFG_17(2, fn, sfx, SH_PFC_PIN_CFG_DRIVE_STRENGTH), \
PORT_GP_CFG_17(3, fn, sfx, SH_PFC_PIN_CFG_DRIVE_STRENGTH), \
PORT_GP_CFG_6(4, fn, sfx, SH_PFC_PIN_CFG_DRIVE_STRENGTH), \
PORT_GP_CFG_15(5, fn, sfx, SH_PFC_PIN_CFG_DRIVE_STRENGTH)
PORT_GP_CFG_22(0, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE), \
PORT_GP_CFG_28(1, fn, sfx, CFG_FLAGS), \
PORT_GP_CFG_17(2, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE), \
PORT_GP_CFG_17(3, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE), \
PORT_GP_CFG_6(4, fn, sfx, CFG_FLAGS), \
PORT_GP_CFG_15(5, fn, sfx, CFG_FLAGS)
/*
* F_() : just information
* FM() : macro for FN_xxx / xxx_MARK
......@@ -2382,18 +2384,31 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
{ },
};
enum ioctrl_regs {
IOCTRL30,
IOCTRL31,
IOCTRL32,
};
static const struct pinmux_ioctrl_reg pinmux_ioctrl_regs[] = {
[IOCTRL30] = { 0xe6060380 },
[IOCTRL31] = { 0xe6060384 },
[IOCTRL32] = { 0xe6060388 },
{ /* sentinel */ },
};
static int r8a77970_pin_to_pocctrl(struct sh_pfc *pfc, unsigned int pin,
u32 *pocctrl)
{
int bit = pin & 0x1f;
*pocctrl = 0xe6060380;
*pocctrl = pinmux_ioctrl_regs[IOCTRL30].reg;
if (pin >= RCAR_GP_PIN(0, 0) && pin <= RCAR_GP_PIN(0, 21))
return bit;
if (pin >= RCAR_GP_PIN(2, 0) && pin <= RCAR_GP_PIN(2, 9))
return bit + 22;
*pocctrl += 4;
*pocctrl = pinmux_ioctrl_regs[IOCTRL31].reg;
if (pin >= RCAR_GP_PIN(2, 10) && pin <= RCAR_GP_PIN(2, 16))
return bit - 10;
if (pin >= RCAR_GP_PIN(3, 0) && pin <= RCAR_GP_PIN(3, 16))
......@@ -2421,6 +2436,7 @@ const struct sh_pfc_soc_info r8a77970_pinmux_info = {
.nr_functions = ARRAY_SIZE(pinmux_functions),
.cfg_regs = pinmux_config_regs,
.ioctrl_regs = pinmux_ioctrl_regs,
.pinmux_data = pinmux_data,
.pinmux_data_size = ARRAY_SIZE(pinmux_data),
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册