提交 f9337405 编写于 作者: S s-paulraj@ti.com 提交者: Kevin Hilman

davinci: DM355 IRQ Definitions

Adding IRQ defintions for DaVinci DM355 and default interrupt
priorities for DM355
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
上级 9e16469c
......@@ -152,4 +152,55 @@
#define IRQ_DM646X_DDRINT 59
#define IRQ_DM646X_AEMIFINT 60
/* DaVinci DM355-specific Interrupts */
#define IRQ_DM355_CCDC_VDINT0 0
#define IRQ_DM355_CCDC_VDINT1 1
#define IRQ_DM355_CCDC_VDINT2 2
#define IRQ_DM355_IPIPE_HST 3
#define IRQ_DM355_H3AINT 4
#define IRQ_DM355_IPIPE_SDR 5
#define IRQ_DM355_IPIPEIFINT 6
#define IRQ_DM355_OSDINT 7
#define IRQ_DM355_VENCINT 8
#define IRQ_DM355_IMCOPINT 11
#define IRQ_DM355_RTOINT 13
#define IRQ_DM355_TINT4 13
#define IRQ_DM355_TINT2_TINT12 13
#define IRQ_DM355_UARTINT2 14
#define IRQ_DM355_TINT5 14
#define IRQ_DM355_TINT2_TINT34 14
#define IRQ_DM355_TINT6 15
#define IRQ_DM355_TINT3_TINT12 15
#define IRQ_DM355_SPINT1_0 17
#define IRQ_DM355_SPINT1_1 18
#define IRQ_DM355_SPINT2_0 19
#define IRQ_DM355_SPINT2_1 21
#define IRQ_DM355_TINT7 22
#define IRQ_DM355_TINT3_TINT34 22
#define IRQ_DM355_SDIOINT0 23
#define IRQ_DM355_MMCINT0 26
#define IRQ_DM355_MSINT 26
#define IRQ_DM355_MMCINT1 27
#define IRQ_DM355_PWMINT3 28
#define IRQ_DM355_SDIOINT1 31
#define IRQ_DM355_SPINT0_0 42
#define IRQ_DM355_SPINT0_1 43
#define IRQ_DM355_GPIO0 44
#define IRQ_DM355_GPIO1 45
#define IRQ_DM355_GPIO2 46
#define IRQ_DM355_GPIO3 47
#define IRQ_DM355_GPIO4 48
#define IRQ_DM355_GPIO5 49
#define IRQ_DM355_GPIO6 50
#define IRQ_DM355_GPIO7 51
#define IRQ_DM355_GPIO8 52
#define IRQ_DM355_GPIO9 53
#define IRQ_DM355_GPIOBNK0 54
#define IRQ_DM355_GPIOBNK1 55
#define IRQ_DM355_GPIOBNK2 56
#define IRQ_DM355_GPIOBNK3 57
#define IRQ_DM355_GPIOBNK4 58
#define IRQ_DM355_GPIOBNK5 59
#define IRQ_DM355_GPIOBNK6 60
#endif /* __ASM_ARCH_IRQS_H */
......@@ -248,6 +248,71 @@ static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
[IRQ_EMUINT] = 7,
};
static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
[IRQ_DM355_CCDC_VDINT0] = 2,
[IRQ_DM355_CCDC_VDINT1] = 6,
[IRQ_DM355_CCDC_VDINT2] = 6,
[IRQ_DM355_IPIPE_HST] = 6,
[IRQ_DM355_H3AINT] = 6,
[IRQ_DM355_IPIPE_SDR] = 6,
[IRQ_DM355_IPIPEIFINT] = 6,
[IRQ_DM355_OSDINT] = 7,
[IRQ_DM355_VENCINT] = 6,
[IRQ_ASQINT] = 6,
[IRQ_IMXINT] = 6,
[IRQ_USBINT] = 4,
[IRQ_DM355_RTOINT] = 4,
[IRQ_DM355_UARTINT2] = 7,
[IRQ_DM355_TINT6] = 7,
[IRQ_CCINT0] = 5, /* dma */
[IRQ_CCERRINT] = 5, /* dma */
[IRQ_TCERRINT0] = 5, /* dma */
[IRQ_TCERRINT] = 5, /* dma */
[IRQ_DM355_SPINT2_1] = 7,
[IRQ_DM355_TINT7] = 4,
[IRQ_DM355_SDIOINT0] = 7,
[IRQ_MBXINT] = 7,
[IRQ_MBRINT] = 7,
[IRQ_MMCINT] = 7,
[IRQ_DM355_MMCINT1] = 7,
[IRQ_DM355_PWMINT3] = 7,
[IRQ_DDRINT] = 7,
[IRQ_AEMIFINT] = 7,
[IRQ_DM355_SDIOINT1] = 4,
[IRQ_TINT0_TINT12] = 2, /* clockevent */
[IRQ_TINT0_TINT34] = 2, /* clocksource */
[IRQ_TINT1_TINT12] = 7, /* DSP timer */
[IRQ_TINT1_TINT34] = 7, /* system tick */
[IRQ_PWMINT0] = 7,
[IRQ_PWMINT1] = 7,
[IRQ_PWMINT2] = 7,
[IRQ_I2C] = 3,
[IRQ_UARTINT0] = 3,
[IRQ_UARTINT1] = 3,
[IRQ_DM355_SPINT0_0] = 3,
[IRQ_DM355_SPINT0_1] = 3,
[IRQ_DM355_GPIO0] = 3,
[IRQ_DM355_GPIO1] = 7,
[IRQ_DM355_GPIO2] = 4,
[IRQ_DM355_GPIO3] = 4,
[IRQ_DM355_GPIO4] = 7,
[IRQ_DM355_GPIO5] = 7,
[IRQ_DM355_GPIO6] = 7,
[IRQ_DM355_GPIO7] = 7,
[IRQ_DM355_GPIO8] = 7,
[IRQ_DM355_GPIO9] = 7,
[IRQ_DM355_GPIOBNK0] = 7,
[IRQ_DM355_GPIOBNK1] = 7,
[IRQ_DM355_GPIOBNK2] = 7,
[IRQ_DM355_GPIOBNK3] = 7,
[IRQ_DM355_GPIOBNK4] = 7,
[IRQ_DM355_GPIOBNK5] = 7,
[IRQ_DM355_GPIOBNK6] = 7,
[IRQ_COMMTX] = 7,
[IRQ_COMMRX] = 7,
[IRQ_EMUINT] = 7,
};
/* ARM Interrupt Controller Initialization */
void __init davinci_irq_init(void)
{
......@@ -257,6 +322,8 @@ void __init davinci_irq_init(void)
davinci_def_priorities = dm644x_default_priorities;
else if (cpu_is_davinci_dm646x())
davinci_def_priorities = dm646x_default_priorities;
else if (cpu_is_davinci_dm355())
davinci_def_priorities = dm355_default_priorities;
/* Clear all interrupt requests */
davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册