提交 f8e77cae 编写于 作者: D Dan Williams 提交者: John W. Linville

libertas: remove unused generic RESET command

The generic reset command is unused.  Each interface type needs to
handle the reset command differently since after reset, the firmware is
dead and interface-specific mechanisms must be used to reinitialize the
card.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 e83a1070
...@@ -480,20 +480,6 @@ int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action, ...@@ -480,20 +480,6 @@ int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action,
return ret; return ret;
} }
static int lbs_cmd_802_11_reset(struct cmd_ds_command *cmd, int cmd_action)
{
struct cmd_ds_802_11_reset *reset = &cmd->params.reset;
lbs_deb_enter(LBS_DEB_CMD);
cmd->command = cpu_to_le16(CMD_802_11_RESET);
cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_reset) + S_DS_GEN);
reset->action = cpu_to_le16(cmd_action);
lbs_deb_leave(LBS_DEB_CMD);
return 0;
}
static int lbs_cmd_802_11_snmp_mib(struct lbs_private *priv, static int lbs_cmd_802_11_snmp_mib(struct lbs_private *priv,
struct cmd_ds_command *cmd, struct cmd_ds_command *cmd,
int cmd_action, int cmd_action,
...@@ -1419,10 +1405,6 @@ int lbs_prepare_and_send_command(struct lbs_private *priv, ...@@ -1419,10 +1405,6 @@ int lbs_prepare_and_send_command(struct lbs_private *priv,
ret = lbs_cmd_80211_associate(priv, cmdptr, pdata_buf); ret = lbs_cmd_80211_associate(priv, cmdptr, pdata_buf);
break; break;
case CMD_802_11_RESET:
ret = lbs_cmd_802_11_reset(cmdptr, cmd_action);
break;
case CMD_802_11_AUTHENTICATE: case CMD_802_11_AUTHENTICATE:
ret = lbs_cmd_80211_authenticate(priv, cmdptr, pdata_buf); ret = lbs_cmd_80211_authenticate(priv, cmdptr, pdata_buf);
break; break;
......
...@@ -271,7 +271,6 @@ static inline int handle_cmd_response(struct lbs_private *priv, ...@@ -271,7 +271,6 @@ static inline int handle_cmd_response(struct lbs_private *priv,
break; break;
case CMD_RET(CMD_802_11_RESET):
case CMD_RET(CMD_802_11_AUTHENTICATE): case CMD_RET(CMD_802_11_AUTHENTICATE):
case CMD_RET(CMD_802_11_BEACON_STOP): case CMD_RET(CMD_802_11_BEACON_STOP):
break; break;
......
...@@ -151,10 +151,6 @@ struct cmd_ds_get_hw_spec { ...@@ -151,10 +151,6 @@ struct cmd_ds_get_hw_spec {
__le32 fwcapinfo; __le32 fwcapinfo;
} __attribute__ ((packed)); } __attribute__ ((packed));
struct cmd_ds_802_11_reset {
__le16 action;
};
struct cmd_ds_802_11_subscribe_event { struct cmd_ds_802_11_subscribe_event {
struct cmd_header hdr; struct cmd_header hdr;
...@@ -717,7 +713,6 @@ struct cmd_ds_command { ...@@ -717,7 +713,6 @@ struct cmd_ds_command {
union { union {
struct cmd_ds_802_11_ps_mode psmode; struct cmd_ds_802_11_ps_mode psmode;
struct cmd_ds_802_11_associate associate; struct cmd_ds_802_11_associate associate;
struct cmd_ds_802_11_reset reset;
struct cmd_ds_802_11_authenticate auth; struct cmd_ds_802_11_authenticate auth;
struct cmd_ds_802_11_get_stat gstat; struct cmd_ds_802_11_get_stat gstat;
struct cmd_ds_802_3_get_stat gstat_8023; struct cmd_ds_802_3_get_stat gstat_8023;
......
...@@ -439,11 +439,10 @@ static int if_usb_reset_device(struct if_usb_card *cardp) ...@@ -439,11 +439,10 @@ static int if_usb_reset_device(struct if_usb_card *cardp)
*(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST); *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST);
cmd->command = cpu_to_le16(CMD_802_11_RESET); cmd->command = cpu_to_le16(CMD_802_11_RESET);
cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_reset) + S_DS_GEN); cmd->size = cpu_to_le16(sizeof(struct cmd_header));
cmd->result = cpu_to_le16(0); cmd->result = cpu_to_le16(0);
cmd->seqnum = cpu_to_le16(0x5a5a); cmd->seqnum = cpu_to_le16(0x5a5a);
cmd->params.reset.action = cpu_to_le16(CMD_ACT_HALT); usb_tx_block(cardp, cardp->ep_out_buf, 4 + sizeof(struct cmd_header));
usb_tx_block(cardp, cardp->ep_out_buf, 4 + S_DS_GEN + sizeof(struct cmd_ds_802_11_reset));
msleep(100); msleep(100);
ret = usb_reset_device(cardp->udev); ret = usb_reset_device(cardp->udev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册