m68knommu: make 528x UART platform addressing consistent

If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 528x UART addressing so that:

. UARTs are numbered from 0 up
. use a common name for IRQs used
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

arch/m68k/include/asm/m528xsim.h

@@ -35,9 +35,15 @@
 
 #define	MCFINT_VECBASE		64		/* Vector base number */
 #define	MCFINT_UART0		13		/* Interrupt number for UART0 */
+#define	MCFINT_UART1		14		/* Interrupt number for UART1 */
+#define	MCFINT_UART2		15		/* Interrupt number for UART2 */
 #define	MCFINT_QSPI		18		/* Interrupt number for QSPI */
 #define	MCFINT_PIT1		55		/* Interrupt number for PIT1 */
 
+#define	MCF_IRQ_UART0	        (MCFINT_VECBASE + MCFINT_UART0)
+#define	MCF_IRQ_UART1	        (MCFINT_VECBASE + MCFINT_UART1)
+#define	MCF_IRQ_UART2	        (MCFINT_VECBASE + MCFINT_UART2)
+
 /*
  *	SDRAM configuration registers.
  */
@@ -58,9 +64,9 @@
 /*
  *	UART module.
  */
-#define	MCFUART_BASE1		(MCF_IPSBAR + 0x00000200)
-#define	MCFUART_BASE2		(MCF_IPSBAR + 0x00000240)
-#define	MCFUART_BASE3		(MCF_IPSBAR + 0x00000280)
+#define	MCFUART_BASE0		(MCF_IPSBAR + 0x00000200)
+#define	MCFUART_BASE1		(MCF_IPSBAR + 0x00000240)
+#define	MCFUART_BASE2		(MCF_IPSBAR + 0x00000280)
 
 /*
  *	FEC ethernet module.

arch/m68k/platform/528x/config.c

@@ -29,16 +29,16 @@
 
 static struct mcf_platform_uart m528x_uart_platform[] = {
 	{
-		.mapbase	= MCFUART_BASE1,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0,
+		.mapbase	= MCFUART_BASE0,
+		.irq		= MCF_IRQ_UART0,
 	},
 	{
-		.mapbase 	= MCFUART_BASE2,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0 + 1,
+		.mapbase 	= MCFUART_BASE1,
+		.irq		= MCF_IRQ_UART1,
 	},
 	{
-		.mapbase 	= MCFUART_BASE3,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0 + 2,
+		.mapbase 	= MCFUART_BASE2,
+		.irq		= MCF_IRQ_UART2,
 	},
 	{ },
 };