提交 f89f38b8 编写于 作者: M Matt Carlson 提交者: David S. Miller

tg3: Unwedge stuck MSI-X vectors

The previous patch changed the code so that new rx buffer submissions to
the hardware stall if a new submission would overwrite data needed by an
unserviced rx packet.  On very busy 5717 and 57765 asic rev devices,
there is a corner case where the hardware will fail to assert an MSI-X
interrupt for rx traffic.  If that vector's interrupt never has another
reason to assert, any rx buffers held will never be serviced.  If the
buffers are never serviced and the hardware consumes all the available
rx packets for other rx rings, deadlock will result.

The most reliable and least intrusive way to work around the problem is
to detect the case where new submissions would overwrite existing data
and force all rx interrupt vectors to fire.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Reviewed-by: NBenjamin Li <benli@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 e92967bf
......@@ -642,7 +642,6 @@ static void tg3_disable_ints(struct tg3 *tp)
static void tg3_enable_ints(struct tg3 *tp)
{
int i;
u32 coal_now = 0;
tp->irq_sync = 0;
wmb();
......@@ -650,13 +649,14 @@ static void tg3_enable_ints(struct tg3 *tp)
tw32(TG3PCI_MISC_HOST_CTRL,
(tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT));
tp->coal_now = tp->coalesce_mode | HOSTCC_MODE_ENABLE;
for (i = 0; i < tp->irq_cnt; i++) {
struct tg3_napi *tnapi = &tp->napi[i];
tw32_mailbox_f(tnapi->int_mbox, tnapi->last_tag << 24);
if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)
tw32_mailbox_f(tnapi->int_mbox, tnapi->last_tag << 24);
coal_now |= tnapi->coal_now;
tp->coal_now |= tnapi->coal_now;
}
/* Force an initial interrupt */
......@@ -664,8 +664,9 @@ static void tg3_enable_ints(struct tg3 *tp)
(tp->napi[0].hw_status->status & SD_STATUS_UPDATED))
tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl | GRC_LCLCTRL_SETINT);
else
tw32(HOSTCC_MODE, tp->coalesce_mode |
HOSTCC_MODE_ENABLE | coal_now);
tw32(HOSTCC_MODE, tp->coal_now);
tp->coal_now &= ~(tp->napi[0].coal_now | tp->napi[1].coal_now);
}
static inline unsigned int tg3_has_work(struct tg3_napi *tnapi)
......@@ -4794,12 +4795,12 @@ static void tg3_poll_link(struct tg3 *tp)
}
}
static void tg3_rx_prodring_xfer(struct tg3 *tp,
struct tg3_rx_prodring_set *dpr,
struct tg3_rx_prodring_set *spr)
static int tg3_rx_prodring_xfer(struct tg3 *tp,
struct tg3_rx_prodring_set *dpr,
struct tg3_rx_prodring_set *spr)
{
u32 si, di, cpycnt, src_prod_idx;
int i;
int i, err = 0;
while (1) {
src_prod_idx = spr->rx_std_prod_idx;
......@@ -4825,6 +4826,7 @@ static void tg3_rx_prodring_xfer(struct tg3 *tp,
for (i = di; i < di + cpycnt; i++) {
if (dpr->rx_std_buffers[i].skb) {
cpycnt = i - di;
err = -ENOSPC;
break;
}
}
......@@ -4881,6 +4883,7 @@ static void tg3_rx_prodring_xfer(struct tg3 *tp,
for (i = di; i < di + cpycnt; i++) {
if (dpr->rx_jmb_buffers[i].skb) {
cpycnt = i - di;
err = -ENOSPC;
break;
}
}
......@@ -4911,6 +4914,8 @@ static void tg3_rx_prodring_xfer(struct tg3 *tp,
dpr->rx_jmb_prod_idx = (dpr->rx_jmb_prod_idx + cpycnt) %
TG3_RX_JUMBO_RING_SIZE;
}
return err;
}
static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
......@@ -4933,12 +4938,13 @@ static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
if ((tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS) && tnapi == &tp->napi[1]) {
struct tg3_rx_prodring_set *dpr = &tp->prodring[0];
int i;
int i, err = 0;
u32 std_prod_idx = dpr->rx_std_prod_idx;
u32 jmb_prod_idx = dpr->rx_jmb_prod_idx;
for (i = 1; i < tp->irq_cnt; i++)
tg3_rx_prodring_xfer(tp, dpr, tp->napi[i].prodring);
err |= tg3_rx_prodring_xfer(tp, dpr,
tp->napi[i].prodring);
wmb();
......@@ -4951,6 +4957,9 @@ static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
dpr->rx_jmb_prod_idx);
mmiowb();
if (err)
tw32_f(HOSTCC_MODE, tp->coal_now);
}
return work_done;
......
......@@ -2699,6 +2699,7 @@ struct tg3 {
struct net_device *dev;
struct pci_dev *pdev;
u32 coal_now;
u32 msg_enable;
/* begin "tx thread" cacheline section */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册