[SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces.

Original from Peter Oruba <peter.oruba@amd.com>.  Additional
cleanups included.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

drivers/scsi/qla2xxx/qla_init.c

@@ -255,7 +255,6 @@ qla24xx_pci_config(scsi_qla_host_t *ha)
 	uint32_t d;
 	unsigned long flags = 0;
 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
-	int pcix_cmd_reg, pcie_dctl_reg;
 
 	pci_set_master(ha->pdev);
 	ret = pci_set_mwi(ha->pdev);
@@ -268,28 +267,12 @@ qla24xx_pci_config(scsi_qla_host_t *ha)
 	pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
 
 	/* PCI-X -- adjust Maximum Memory Read Byte Count (2048). */
-	pcix_cmd_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_PCIX);
-	if (pcix_cmd_reg) {
-		uint16_t pcix_cmd;
-
-		pcix_cmd_reg += PCI_X_CMD;
-		pci_read_config_word(ha->pdev, pcix_cmd_reg, &pcix_cmd);
-		pcix_cmd &= ~PCI_X_CMD_MAX_READ;
-		pcix_cmd |= 0x0008;
-		pci_write_config_word(ha->pdev, pcix_cmd_reg, pcix_cmd);
-	}
+	if (pci_find_capability(ha->pdev, PCI_CAP_ID_PCIX))
+		pcix_set_mmrbc(ha->pdev, 2048);
 
 	/* PCIe -- adjust Maximum Read Request Size (2048). */
-	pcie_dctl_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
-	if (pcie_dctl_reg) {
-		uint16_t pcie_dctl;
-
-		pcie_dctl_reg += PCI_EXP_DEVCTL;
-		pci_read_config_word(ha->pdev, pcie_dctl_reg, &pcie_dctl);
-		pcie_dctl &= ~PCI_EXP_DEVCTL_READRQ;
-		pcie_dctl |= 0x4000;
-		pci_write_config_word(ha->pdev, pcie_dctl_reg, pcie_dctl);
-	}
+	if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
+		pcie_set_readrq(ha->pdev, 2048);
 
 	/* Reset expansion ROM address decode enable */
 	pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);