提交 f78d92c9 编写于 作者: D Dean Anderson 提交者: Mauro Carvalho Chehab

V4L/DVB (8490): s2255drv Sensoray 2255 driver fixes

This patch fixes timer issues in driver disconnect.
It also removes the restriction of one user per channel at a time.

Thanks to Oliver Neukum and Mauro Chehab for finding these issues.
Locking of video stream partly based on saa7134 driver.
Signed-off-by: NDean Anderson <dean@sensoray.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
上级 655b8408
......@@ -185,6 +185,7 @@ struct s2255_dmaqueue {
#define S2255_FW_LOADED_DSPWAIT 1
#define S2255_FW_SUCCESS 2
#define S2255_FW_FAILED 3
#define S2255_FW_DISCONNECTING 4
struct s2255_fw {
int fw_loaded;
......@@ -264,7 +265,6 @@ struct s2255_buffer {
struct s2255_fh {
struct s2255_dev *dev;
unsigned int resources;
const struct s2255_fmt *fmt;
unsigned int width;
unsigned int height;
......@@ -274,14 +274,9 @@ struct s2255_fh {
/* mode below is the desired mode.
mode in s2255_dev is the current mode that was last set */
struct s2255_mode mode;
int resources[MAX_CHANNELS];
};
/*
* TODO: fixme S2255_MAX_USERS. Do not limit open driver handles.
* Limit V4L to one stream at a time.
*/
#define S2255_MAX_USERS 1
#define CUR_USB_FWVER 774 /* current cypress EEPROM firmware version */
#define S2255_MAJOR_VERSION 1
#define S2255_MINOR_VERSION 13
......@@ -477,10 +472,9 @@ static void s2255_timer(unsigned long user_data)
dprintk(100, "s2255 timer\n");
if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) {
printk(KERN_ERR "s2255: can't submit urb\n");
if (data->fw) {
release_firmware(data->fw);
data->fw = NULL;
}
atomic_set(&data->fw_state, S2255_FW_FAILED);
/* wake up anything waiting for the firmware */
wake_up(&data->wait_fw);
return;
}
}
......@@ -510,13 +504,18 @@ static void s2255_fwchunk_complete(struct urb *urb)
struct usb_device *udev = urb->dev;
int len;
dprintk(100, "udev %p urb %p", udev, urb);
/* TODO: fixme. reflect change in status */
if (urb->status) {
dev_err(&udev->dev, "URB failed with status %d", urb->status);
atomic_set(&data->fw_state, S2255_FW_FAILED);
/* wake up anything waiting for the firmware */
wake_up(&data->wait_fw);
return;
}
if (data->fw_urb == NULL) {
dev_err(&udev->dev, "early disconncect\n");
dev_err(&udev->dev, "s2255 disconnected\n");
atomic_set(&data->fw_state, S2255_FW_FAILED);
/* wake up anything waiting for the firmware */
wake_up(&data->wait_fw);
return;
}
#define CHUNK_SIZE 512
......@@ -790,7 +789,8 @@ static int res_get(struct s2255_dev *dev, struct s2255_fh *fh)
}
/* it's free, grab it */
dev->resources[fh->channel] = 1;
dprintk(1, "res: get\n");
fh->resources[fh->channel] = 1;
dprintk(1, "s2255: res: get\n");
mutex_unlock(&dev->lock);
return 1;
}
......@@ -800,9 +800,18 @@ static int res_locked(struct s2255_dev *dev, struct s2255_fh *fh)
return dev->resources[fh->channel];
}
static int res_check(struct s2255_fh *fh)
{
return fh->resources[fh->channel];
}
static void res_free(struct s2255_dev *dev, struct s2255_fh *fh)
{
mutex_lock(&dev->lock);
dev->resources[fh->channel] = 0;
fh->resources[fh->channel] = 0;
mutex_unlock(&dev->lock);
dprintk(1, "res: put\n");
}
......@@ -1233,7 +1242,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
}
if (!res_get(dev, fh)) {
dev_err(&dev->udev->dev, "res get busy\n");
dev_err(&dev->udev->dev, "s2255: stream busy\n");
return -EBUSY;
}
......@@ -1289,8 +1298,10 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
}
s2255_stop_acquire(dev, fh->channel);
res = videobuf_streamoff(&fh->vb_vidq);
if (res < 0)
return res;
res_free(dev, fh);
return res;
return 0;
}
static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i)
......@@ -1463,12 +1474,7 @@ static int s2255_open(struct inode *inode, struct file *file)
mutex_lock(&dev->open_lock);
dev->users[cur_channel]++;
if (dev->users[cur_channel] > S2255_MAX_USERS) {
dev->users[cur_channel]--;
mutex_unlock(&dev->open_lock);
printk(KERN_INFO "s2255drv: too many open handles!\n");
return -EBUSY;
}
dprintk(4, "s2255: open_handles %d\n", dev->users[cur_channel]);
if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_FAILED) {
err("2255 firmware load failed. retrying.\n");
......@@ -1479,7 +1485,8 @@ static int s2255_open(struct inode *inode, struct file *file)
msecs_to_jiffies(S2255_LOAD_TIMEOUT));
if (atomic_read(&dev->fw_data->fw_state)
!= S2255_FW_SUCCESS) {
printk(KERN_INFO "2255 FW load failed after 2 tries\n");
printk(KERN_INFO "2255 FW load failed.\n");
dev->users[cur_channel]--;
mutex_unlock(&dev->open_lock);
return -EFAULT;
}
......@@ -1495,6 +1502,7 @@ static int s2255_open(struct inode *inode, struct file *file)
!= S2255_FW_SUCCESS) {
printk(KERN_INFO "2255 firmware not loaded"
"try again\n");
dev->users[cur_channel]--;
mutex_unlock(&dev->open_lock);
return -EBUSY;
}
......@@ -1503,6 +1511,7 @@ static int s2255_open(struct inode *inode, struct file *file)
/* allocate + initialize per filehandle data */
fh = kzalloc(sizeof(*fh), GFP_KERNEL);
if (NULL == fh) {
dev->users[cur_channel]--;
mutex_unlock(&dev->open_lock);
return -ENOMEM;
}
......@@ -1562,44 +1571,48 @@ static void s2255_destroy(struct kref *kref)
printk(KERN_ERR "s2255drv: kref problem\n");
return;
}
/*
* Wake up any firmware load waiting (only done in .open,
* which holds the open_lock mutex)
*/
atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING);
wake_up(&dev->fw_data->wait_fw);
/* prevent s2255_disconnect from racing s2255_open */
mutex_lock(&dev->open_lock);
s2255_exit_v4l(dev);
/* device unregistered so no longer possible to open. open_mutex
can be unlocked */
/*
* device unregistered so no longer possible to open. open_mutex
* can be unlocked and timers deleted afterwards.
*/
mutex_unlock(&dev->open_lock);
/* board shutdown stops the read pipe if it is running */
s2255_board_shutdown(dev);
/* make sure firmware still not trying to load */
del_timer(&dev->timer); /* only started in .probe and .open */
if (dev->fw_data->fw_urb) {
dprintk(2, "kill fw_urb\n");
usb_kill_urb(dev->fw_data->fw_urb);
usb_free_urb(dev->fw_data->fw_urb);
dev->fw_data->fw_urb = NULL;
}
/*
* TODO: fixme(above, below): potentially leaving timers alive.
* do not ignore timeout below if
* it occurs.
* delete the dsp_wait timer, which sets the firmware
* state on completion. This is done before fw_data
* is freed below.
*/
/* make sure we aren't waiting for the DSP */
if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_LOADED_DSPWAIT) {
/* if we are, wait for the wakeup for fw_success or timeout */
wait_event_timeout(dev->fw_data->wait_fw,
(atomic_read(&dev->fw_data->fw_state)
== S2255_FW_SUCCESS),
msecs_to_jiffies(S2255_LOAD_TIMEOUT));
}
del_timer(&dev->fw_data->dsp_wait); /* only started in .open */
if (dev->fw_data) {
if (dev->fw_data->fw)
release_firmware(dev->fw_data->fw);
kfree(dev->fw_data->pfw_data);
kfree(dev->fw_data);
}
if (dev->fw_data->fw)
release_firmware(dev->fw_data->fw);
kfree(dev->fw_data->pfw_data);
kfree(dev->fw_data);
usb_put_dev(dev->udev);
dprintk(1, "%s", __func__);
......@@ -1616,17 +1629,23 @@ static int s2255_close(struct inode *inode, struct file *file)
mutex_lock(&dev->open_lock);
if (dev->b_acquire[fh->channel])
s2255_stop_acquire(dev, fh->channel);
res_free(dev, fh);
/* turn off stream */
if (res_check(fh)) {
if (dev->b_acquire[fh->channel])
s2255_stop_acquire(dev, fh->channel);
videobuf_streamoff(&fh->vb_vidq);
res_free(dev, fh);
}
videobuf_mmap_free(&fh->vb_vidq);
kfree(fh);
dev->users[fh->channel]--;
mutex_unlock(&dev->open_lock);
kref_put(&dev->kref, s2255_destroy);
dprintk(1, "s2255: close called (minor=%d, users=%d)\n",
minor, dev->users[fh->channel]);
kfree(fh);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册