提交 f789bf40 编写于 作者: J Jarod Wilson 提交者: Mauro Carvalho Chehab

V4L/DVB: IR/imon: clean up usage of bools

There was a mix of 0/1 and false/true. Pick one convention and stick
with it (I picked false/true).
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 517521e4
......@@ -385,7 +385,7 @@ static int display_open(struct inode *inode, struct file *file)
err("%s: display port is already open", __func__);
retval = -EBUSY;
} else {
ictx->display_isopen = 1;
ictx->display_isopen = true;
file->private_data = ictx;
dev_dbg(ictx->dev, "display port opened\n");
}
......@@ -422,7 +422,7 @@ static int display_close(struct inode *inode, struct file *file)
err("%s: display is not open", __func__);
retval = -EIO;
} else {
ictx->display_isopen = 0;
ictx->display_isopen = false;
dev_dbg(ictx->dev, "display port closed\n");
if (!ictx->dev_present_intf0) {
/*
......@@ -491,12 +491,12 @@ static int send_packet(struct imon_context *ictx)
}
init_completion(&ictx->tx.finished);
ictx->tx.busy = 1;
ictx->tx.busy = true;
smp_rmb(); /* ensure later readers know we're busy */
retval = usb_submit_urb(ictx->tx_urb, GFP_KERNEL);
if (retval) {
ictx->tx.busy = 0;
ictx->tx.busy = false;
smp_rmb(); /* ensure later readers know we're not busy */
err("%s: error submitting urb(%d)", __func__, retval);
} else {
......@@ -682,7 +682,7 @@ static ssize_t store_associate_remote(struct device *d,
return -ENODEV;
mutex_lock(&ictx->lock);
ictx->rf_isassociating = 1;
ictx->rf_isassociating = true;
send_associate_24g(ictx);
mutex_unlock(&ictx->lock);
......@@ -950,7 +950,7 @@ static void usb_tx_callback(struct urb *urb)
ictx->tx.status = urb->status;
/* notify waiters that write has finished */
ictx->tx.busy = 0;
ictx->tx.busy = false;
smp_rmb(); /* ensure later readers know we're not busy */
complete(&ictx->tx.finished);
}
......@@ -1215,7 +1215,7 @@ static bool imon_mouse_event(struct imon_context *ictx,
{
char rel_x = 0x00, rel_y = 0x00;
u8 right_shift = 1;
bool mouse_input = 1;
bool mouse_input = true;
int dir = 0;
/* newer iMON device PAD or mouse button */
......@@ -1246,7 +1246,7 @@ static bool imon_mouse_event(struct imon_context *ictx,
} else if (ictx->kc == KEY_CHANNELDOWN && (buf[2] & 0x40) != 0x40) {
dir = -1;
} else
mouse_input = 0;
mouse_input = false;
if (mouse_input) {
dev_dbg(ictx->dev, "sending mouse data via input subsystem\n");
......@@ -1450,7 +1450,7 @@ static void imon_incoming_packet(struct imon_context *ictx,
unsigned char *buf = urb->transfer_buffer;
struct device *dev = ictx->dev;
u32 kc;
bool norelease = 0;
bool norelease = false;
int i;
u64 temp_key;
u64 panel_key = 0;
......@@ -1517,7 +1517,7 @@ static void imon_incoming_packet(struct imon_context *ictx,
!(buf[1] & 0x1 || buf[1] >> 2 & 0x1))) {
len = 8;
imon_pad_to_keys(ictx, buf);
norelease = 1;
norelease = true;
}
if (debug) {
......@@ -1580,7 +1580,7 @@ static void imon_incoming_packet(struct imon_context *ictx,
(buf[6] == 0x5E && buf[7] == 0xDF))) { /* DT */
dev_warn(dev, "%s: remote associated refid=%02X\n",
__func__, buf[1]);
ictx->rf_isassociating = 0;
ictx->rf_isassociating = false;
}
}
......@@ -1790,9 +1790,9 @@ static bool imon_find_endpoints(struct imon_context *ictx,
int ifnum = iface_desc->desc.bInterfaceNumber;
int num_endpts = iface_desc->desc.bNumEndpoints;
int i, ep_dir, ep_type;
bool ir_ep_found = 0;
bool display_ep_found = 0;
bool tx_control = 0;
bool ir_ep_found = false;
bool display_ep_found = false;
bool tx_control = false;
/*
* Scan the endpoint list and set:
......@@ -1808,13 +1808,13 @@ static bool imon_find_endpoints(struct imon_context *ictx,
ep_type == USB_ENDPOINT_XFER_INT) {
rx_endpoint = ep;
ir_ep_found = 1;
ir_ep_found = true;
dev_dbg(ictx->dev, "%s: found IR endpoint\n", __func__);
} else if (!display_ep_found && ep_dir == USB_DIR_OUT &&
ep_type == USB_ENDPOINT_XFER_INT) {
tx_endpoint = ep;
display_ep_found = 1;
display_ep_found = true;
dev_dbg(ictx->dev, "%s: found display endpoint\n", __func__);
}
}
......@@ -1835,8 +1835,8 @@ static bool imon_find_endpoints(struct imon_context *ictx,
* newer iMON devices that use control urb instead of interrupt
*/
if (!display_ep_found) {
tx_control = 1;
display_ep_found = 1;
tx_control = true;
display_ep_found = true;
dev_dbg(ictx->dev, "%s: device uses control endpoint, not "
"interface OUT endpoint\n", __func__);
}
......@@ -1847,7 +1847,7 @@ static bool imon_find_endpoints(struct imon_context *ictx,
* and without... :\
*/
if (ictx->display_type == IMON_DISPLAY_TYPE_NONE) {
display_ep_found = 0;
display_ep_found = false;
dev_dbg(ictx->dev, "%s: device has no display\n", __func__);
}
......@@ -1856,7 +1856,7 @@ static bool imon_find_endpoints(struct imon_context *ictx,
* that refers to e.g. /dev/lcd0 (a character device LCD or VFD).
*/
if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
display_ep_found = 0;
display_ep_found = false;
dev_dbg(ictx->dev, "%s: iMON Touch device found\n", __func__);
}
......@@ -1905,7 +1905,7 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf)
ictx->dev = dev;
ictx->usbdev_intf0 = usb_get_dev(interface_to_usbdev(intf));
ictx->dev_present_intf0 = 1;
ictx->dev_present_intf0 = true;
ictx->rx_urb_intf0 = rx_urb;
ictx->tx_urb = tx_urb;
......@@ -1979,7 +1979,7 @@ static struct imon_context *imon_init_intf1(struct usb_interface *intf,
}
ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf));
ictx->dev_present_intf1 = 1;
ictx->dev_present_intf1 = true;
ictx->rx_urb_intf1 = rx_urb;
ret = -ENODEV;
......@@ -2297,7 +2297,7 @@ static void __devexit imon_disconnect(struct usb_interface *interface)
}
if (ifnum == 0) {
ictx->dev_present_intf0 = 0;
ictx->dev_present_intf0 = false;
usb_kill_urb(ictx->rx_urb_intf0);
input_unregister_device(ictx->idev);
if (ictx->display_supported) {
......@@ -2307,7 +2307,7 @@ static void __devexit imon_disconnect(struct usb_interface *interface)
usb_deregister_dev(interface, &imon_vfd_class);
}
} else {
ictx->dev_present_intf1 = 0;
ictx->dev_present_intf1 = false;
usb_kill_urb(ictx->rx_urb_intf1);
if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
input_unregister_device(ictx->touch);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册