提交 f6ca6f11 编写于 作者: M Magnus Damm 提交者: Simon Horman

ARM: shmobile: r7s72100 SCIF support

Add SCIF serial port support to the r7s72100 SoC by
adding platform devices for SCIF0 -> SCIF7 together with
clock bindings. DT device description is excluded at
this point since such bindings are still under
development.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
上级 e3da5b36
......@@ -170,6 +170,14 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
/* MSTP clocks */
CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
};
void __init r7s72100_clock_init(void)
......
#ifndef __ASM_R7S72100_H__
#define __ASM_R7S72100_H__
void r7s72100_add_dt_devices(void);
void r7s72100_clock_init(void);
void r7s72100_init_early(void);
......
......@@ -21,10 +21,55 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/serial_sci.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r7s72100.h>
#include <asm/mach/arch.h>
#define SCIF_DATA(index, baseaddr, irq) \
[index] = { \
.type = PORT_SCIF, \
.regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, \
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
.scbrr_algo_id = SCBRR_ALGO_2, \
.scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | \
SCSCR_REIE, \
.mapbase = baseaddr, \
.irqs = { irq + 1, irq + 2, irq + 3, irq }, \
}
enum { SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7 };
static const struct plat_sci_port scif[] __initconst = {
SCIF_DATA(SCIF0, 0xe8007000, gic_iid(221)), /* SCIF0 */
SCIF_DATA(SCIF1, 0xe8007800, gic_iid(225)), /* SCIF1 */
SCIF_DATA(SCIF2, 0xe8008000, gic_iid(229)), /* SCIF2 */
SCIF_DATA(SCIF3, 0xe8008800, gic_iid(233)), /* SCIF3 */
SCIF_DATA(SCIF4, 0xe8009000, gic_iid(237)), /* SCIF4 */
SCIF_DATA(SCIF5, 0xe8009800, gic_iid(241)), /* SCIF5 */
SCIF_DATA(SCIF6, 0xe800a000, gic_iid(245)), /* SCIF6 */
SCIF_DATA(SCIF7, 0xe800a800, gic_iid(249)), /* SCIF7 */
};
static inline void r7s72100_register_scif(int idx)
{
platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
sizeof(struct plat_sci_port));
}
void __init r7s72100_add_dt_devices(void)
{
r7s72100_register_scif(SCIF0);
r7s72100_register_scif(SCIF1);
r7s72100_register_scif(SCIF2);
r7s72100_register_scif(SCIF3);
r7s72100_register_scif(SCIF4);
r7s72100_register_scif(SCIF5);
r7s72100_register_scif(SCIF6);
r7s72100_register_scif(SCIF7);
}
void __init r7s72100_init_early(void)
{
shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册