atomisp: HRT_CSIM is never defined

Remove the content that is guarded by this define
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/input_formatter.c

@@ -204,15 +204,8 @@ void input_formatter_bin_get_state(
 	assert(ID < N_INPUT_FORMATTER_ID);
 	assert(state != NULL);
 
-#ifdef HRT_CSIM
-	/* The compiled simulator mode of the input formatter
-	 * does not support reading from the write-only reset
-	 * register. */
-	state->reset = 0;
-#else
 	state->reset = input_formatter_reg_load(ID,
 		HIVE_STR2MEM_SOFT_RESET_REG_ADDRESS);
-#endif
 	state->input_endianness = input_formatter_reg_load(ID,
 		HIVE_STR2MEM_INPUT_ENDIANNESS_REG_ADDRESS);
 	state->output_endianness = input_formatter_reg_load(ID,

drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/irq.c

@@ -218,9 +218,6 @@ void irq_raise(
 /* The SW IRQ pins are remapped to offset zero */
 	gp_device_reg_store(GP_DEVICE0_ID,
 		(unsigned int)addr, 1);
-#ifdef HRT_CSIM
-	hrt_sleep();
-#endif
 	gp_device_reg_store(GP_DEVICE0_ID,
 		(unsigned int)addr, 0);
 return;
@@ -412,14 +409,10 @@ return status;
 STORAGE_CLASS_INLINE void irq_wait_for_write_complete(
 	const irq_ID_t		ID)
 {
-assert(ID < N_IRQ_ID);
-assert(IRQ_BASE[ID] != (hrt_address)-1);
+	assert(ID < N_IRQ_ID);
+	assert(IRQ_BASE[ID] != (hrt_address)-1);
 	(void)ia_css_device_load_uint32(IRQ_BASE[ID] +
 		_HRT_IRQ_CONTROLLER_ENABLE_REG_IDX*sizeof(hrt_data));
-#ifdef HRT_CSIM
-	hrt_sleep();
-#endif
-return;
 }
 
 STORAGE_CLASS_INLINE bool any_irq_channel_enabled(

drivers/staging/media/atomisp/pci/atomisp2/css2400/runtime/debug/src/ia_css_debug.c

@@ -2578,29 +2578,13 @@ ia_css_debug_mode_enable_dma_channel(int dma_id,
 void dtrace_dot(const char *fmt, ...)
 {
 	va_list ap;
-#ifdef HRT_CSIM
-	va_list ap2;
-#endif
 
 	assert(fmt != NULL);
 	va_start(ap, fmt);
-#ifdef HRT_CSIM
-	va_start(ap2, fmt);
-#endif
 
 	ia_css_debug_dtrace(IA_CSS_DEBUG_INFO, "%s", DPG_START);
 	ia_css_debug_vdtrace(IA_CSS_DEBUG_INFO, fmt, ap);
 	ia_css_debug_dtrace(IA_CSS_DEBUG_INFO, "%s", DPG_END);
-#ifdef HRT_CSIM
-	/* For CSIM we print double because HSS log can mess up this output
-	 * As post processing, we remove incomplete lines and make lines uniq.
-	 * */
-	ia_css_debug_dtrace(IA_CSS_DEBUG_INFO, "%s", DPG_START);
-	ia_css_debug_vdtrace(IA_CSS_DEBUG_INFO, fmt, ap2);
-	ia_css_debug_dtrace(IA_CSS_DEBUG_INFO, "%s", DPG_END);\
-
-	va_end(ap2);
-#endif
 	va_end(ap);
 }
 #ifdef HAS_WATCHDOG_SP_THREAD_DEBUG

drivers/staging/media/atomisp/pci/atomisp2/css2400/runtime/spctrl/src/spctrl.c

@@ -32,10 +32,6 @@ more details.
 #define __INLINE_SP__
 #include "sp.h"
 
-#ifdef HRT_CSIM
-#include <hive_isp_css_sp_hrt.h>
-#endif
-
 #include "memory_access.h"
 #include "assert_support.h"
 #include "ia_css_spctrl.h"
@@ -113,28 +109,11 @@ enum ia_css_err ia_css_spctrl_load_fw(sp_ID_t sp_id,
 	spctrl_cofig_info[sp_id].code_addr = code_addr;
 	spctrl_cofig_info[sp_id].program_name = spctrl_cfg->program_name;
 
-#ifdef HRT_CSIM
-	/* Secondary SP is named as SP2 in SDK, however we are using secondary
-	   SP as SP1 in the HSS and secondary SP Firmware */
-	if (sp_id == SP0_ID) {
-		hrt_cell_set_icache_base_address(SP, spctrl_cofig_info[sp_id].code_addr);
-		hrt_cell_invalidate_icache(SP);
-		hrt_cell_load_program(SP, spctrl_cofig_info[sp_id].program_name);
-	}
-#if defined(HAS_SEC_SP)
-	else {
-		hrt_cell_set_icache_base_address(SP2, spctrl_cofig_info[sp_id].code_addr);
-		hrt_cell_invalidate_icache(SP2);
-		hrt_cell_load_program(SP2, spctrl_cofig_info[sp_id].program_name);
-	}
-#endif /* HAS_SEC_SP */
-#else
 	/* now we program the base address into the icache and
 	 * invalidate the cache.
 	 */
 	sp_ctrl_store(sp_id, SP_ICACHE_ADDR_REG, (hrt_data)spctrl_cofig_info[sp_id].code_addr);
 	sp_ctrl_setbit(sp_id, SP_ICACHE_INV_REG, SP_ICACHE_INV_BIT);
-#endif
 	spctrl_loaded[sp_id] = true;
 	return IA_CSS_SUCCESS;
 }
@@ -143,32 +122,15 @@ enum ia_css_err ia_css_spctrl_load_fw(sp_ID_t sp_id,
 /* reload pre-loaded FW */
 void sh_css_spctrl_reload_fw(sp_ID_t sp_id)
 {
-#ifdef HRT_CSIM
-	/* Secondary SP is named as SP2 in SDK, however we are using secondary
-	SP as SP1 in the HSS and secondary SP Firmware */
-	if (sp_id == SP0_ID) {
-		hrt_cell_set_icache_base_address(SP, spctrl_cofig_info[sp_id].code_addr);
-		hrt_cell_invalidate_icache(SP);
-		hrt_cell_load_program(SP, spctrl_cofig_info[sp_id].program_name);
-	}
-#if defined(HAS_SEC_SP)
-	else {
-		hrt_cell_set_icache_base_address(SP2, spctrl_cofig_info[sp_id].code_addr);
-		hrt_cell_invalidate_icache(SP2);
-		hrt_cell_load_program(SP2, spctrl_cofig_info[sp_id].program_name);
-	}
-#endif /* HAS_SEC_SP */
-#else
 	/* now we program the base address into the icache and
 	* invalidate the cache.
 	*/
 	sp_ctrl_store(sp_id, SP_ICACHE_ADDR_REG, (hrt_data)spctrl_cofig_info[sp_id].code_addr);
 	sp_ctrl_setbit(sp_id, SP_ICACHE_INV_REG, SP_ICACHE_INV_BIT);
-#endif
 	spctrl_loaded[sp_id] = true;
 }
-
 #endif
+
 hrt_vaddress get_sp_code_addr(sp_ID_t  sp_id)
 {
 	return spctrl_cofig_info[sp_id].code_addr;
@@ -186,40 +148,6 @@ enum ia_css_err ia_css_spctrl_unload_fw(sp_ID_t sp_id)
 	return IA_CSS_SUCCESS;
 }
 
-#ifdef HRT_CSIM
-enum ia_css_err ia_css_spctrl_start(sp_ID_t sp_id)
-{
-	unsigned int HIVE_ADDR_sp_start_isp_entry;
-#if defined(HAS_SEC_SP)
-	unsigned int HIVE_ADDR_sp1_start_entry;
-#endif /* HAS_SEC_SP */
-	if ((sp_id >= N_SP_ID) || ((sp_id < N_SP_ID) && (!spctrl_loaded[sp_id])))
-		return IA_CSS_ERR_INVALID_ARGUMENTS;
-if (sp_id == SP0_ID)
-	HIVE_ADDR_sp_start_isp_entry = spctrl_cofig_info[sp_id].sp_entry;
-#if defined(HAS_SEC_SP)
-else
-	HIVE_ADDR_sp1_start_entry = spctrl_cofig_info[sp_id].sp_entry;
-#endif /* HAS_SEC_SP  */
-
-#if !defined(C_RUN) && !defined(HRT_UNSCHED)
-	sp_dmem_store(sp_id,
-		spctrl_cofig_info[sp_id].spctrl_config_dmem_addr,
-		&spctrl_cofig_info[sp_id].dmem_config,
-		sizeof(spctrl_cofig_info[sp_id].dmem_config));
-#endif
-	if (sp_id == SP0_ID)
-		hrt_cell_start_function(SP, sp_start_isp);
-#if defined(HAS_SEC_SP)
-	else
-		/* Secondary SP is named as sp1 in the firmware however in
-		   SDK secondary SP is named as SP2 */
-		hrt_cell_start_function(SP2, sp1_start);
-#endif /* HAS_SEC_SP */
-
-	return IA_CSS_SUCCESS;
-}
-#else
 /* Initialize dmem_cfg in SP dmem  and  start SP program*/
 enum ia_css_err ia_css_spctrl_start(sp_ID_t sp_id)
 {
@@ -244,7 +172,7 @@ enum ia_css_err ia_css_spctrl_start(sp_ID_t sp_id)
 	sp_ctrl_setbit(sp_id, SP_SC_REG, SP_START_BIT);
 	return IA_CSS_SUCCESS;
 }
-#endif
+
 /* Query the state of SP1 */
 ia_css_spctrl_sp_sw_state ia_css_spctrl_get_state(sp_ID_t sp_id)
 {
@@ -270,16 +198,7 @@ int ia_css_spctrl_is_idle(sp_ID_t sp_id)
 	int state = 0;
 	assert (sp_id < N_SP_ID);
 
-#ifdef HRT_CSIM
-	if (sp_id == SP0_ID)
-		state = (int)hrt_ctl_is_ready(SP);
-#if defined(HAS_SEC_SP)
-	else
-		state = (int)hrt_ctl_is_ready(SP2);
-#endif /* HAS_SEC_SP */
-#else /* HRT_CSIM */
 	state = sp_ctrl_getbit(sp_id, SP_SC_REG, SP_IDLE_BIT);
-#endif /* HRT_CSIM */
 	return state;
 }
 

drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css.c

@@ -1575,14 +1575,6 @@ enable_interrupts(enum ia_css_irq_type irq_type)
 		ia_css_isys_rx_enable_all_interrupts(port);
 #endif
 
-#if defined(HRT_CSIM)
-	/*
-	 * Enable IRQ on the SP which signals that SP goes to idle
-	 * to get statistics for each binary
-	 */
-	cnd_isp_irq_enable(ISP0_ID, true);
-	cnd_virq_enable_channel(virq_isp, true);
-#endif
 	IA_CSS_LEAVE_PRIVATE("");
 }
 
@@ -1939,18 +1931,6 @@ ia_css_init(const struct ia_css_env *env,
 	}
 #endif /* HAS_BL */
 
-#if defined(HRT_CSIM)
-	/**
-	 * In compiled simulator context include debug support by default.
-	 * In all other cases (e.g. Android phone), the user (e.g. driver)
-	 * must explicitly enable debug support by calling this function.
-	 */
-	if (!ia_css_debug_mode_init()) {
-		IA_CSS_LEAVE_ERR(IA_CSS_ERR_INTERNAL_ERROR);
-		return IA_CSS_ERR_INTERNAL_ERROR;
-	}
-#endif
-
 #if WITH_PC_MONITORING
 	if (!thread_alive) {
 		thread_alive++;
@@ -2317,10 +2297,6 @@ create_host_pipeline(struct ia_css_stream *stream)
 				goto ERR;
 		}
 
-#ifdef HRT_CSIM
-		if(main_pipe->continuous_frames[0])
-			ia_css_frame_zero(main_pipe->continuous_frames[0]);
-#endif
 	}
 
 #if defined(USE_INPUT_SYSTEM_VERSION_2)
@@ -2806,11 +2782,6 @@ enum ia_css_err ia_css_irq_translate(
 			infos |= IA_CSS_IRQ_INFO_EVENTS_READY;
 			break;
 		case virq_isp:
-#ifdef HRT_CSIM
-			/* Enable IRQ which signals that ISP goes to idle
-			 * to get statistics for each binary */
-			infos |= IA_CSS_IRQ_INFO_ISP_BINARY_STATISTICS_READY;
-#endif
 			break;
 #if !defined(HAS_NO_INPUT_SYSTEM)
 		case virq_isys_sof:
@@ -6062,9 +6033,6 @@ static enum ia_css_err load_video_binaries(struct ia_css_pipe *pipe)
 		err = ia_css_frame_allocate_from_info(
 				&mycs->tnr_frames[i],
 				&tnr_info);
-#ifdef HRT_CSIM
-		ia_css_frame_zero(mycs->tnr_frames[i]);
-#endif
 		if (err != IA_CSS_SUCCESS)
 			return err;
 	}
@@ -6773,9 +6741,6 @@ allocate_delay_frames(struct ia_css_pipe *pipe)
 		err = ia_css_frame_allocate_from_info(&delay_frames[i],	&ref_info);
 		if (err != IA_CSS_SUCCESS)
 			return err;
-#if defined(HRT_CSIM) || defined(__SVOS__)
-		ia_css_frame_zero(delay_frames[i]);
-#endif
 	}
 	IA_CSS_LEAVE_PRIVATE("");
 	return IA_CSS_SUCCESS;
@@ -11193,10 +11158,8 @@ enum ia_css_err
 ia_css_pipe_update_qos_ext_mapped_arg(struct ia_css_pipe *pipe, uint32_t fw_handle,
 	struct ia_css_isp_param_css_segments *css_seg, struct ia_css_isp_param_isp_segments *isp_seg)
 {
-#ifndef HRT_CSIM
 	unsigned int HIVE_ADDR_sp_group;
 	static struct sh_css_sp_group sp_group;
-#endif
 	static struct sh_css_sp_stage sp_stage;
 	static struct sh_css_isp_stage isp_stage;
 	const struct ia_css_fw_info *fw;
@@ -11235,17 +11198,12 @@ ia_css_pipe_update_qos_ext_mapped_arg(struct ia_css_pipe *pipe, uint32_t fw_hand
 			} else {
 				stage_num = stage->stage_num;
 
-#ifndef HRT_CSIM
 				HIVE_ADDR_sp_group = fw->info.sp.group;
 				sp_dmem_load(SP0_ID,
 					(unsigned int)sp_address_of(sp_group),
 					&sp_group, sizeof(struct sh_css_sp_group));
 				mmgr_load(sp_group.pipe[thread_id].sp_stage_addr[stage_num],
 					&sp_stage, sizeof(struct sh_css_sp_stage));
-#else
-				mmgr_load(sh_css_sp_group.pipe[thread_id].sp_stage_addr[stage_num],
-					&sp_stage, sizeof(struct sh_css_sp_stage));
-#endif
 
 				mmgr_load(sp_stage.isp_stage_addr,
 					&isp_stage, sizeof(struct sh_css_isp_stage));

drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css_firmware.c

@@ -226,7 +226,7 @@ sh_css_load_firmware(const char *fw_data,
 	strncpy(FW_rel_ver_name, file_header->version, min(sizeof(FW_rel_ver_name), sizeof(file_header->version)) - 1);
 	valid_firmware = sh_css_check_firmware_version(fw_data);
 	if (!valid_firmware) {
-#if (!defined HRT_CSIM && !defined HRT_RTL)
+#if !defined(HRT_RTL)
 		IA_CSS_ERROR("CSS code version (%s) and firmware version (%s) mismatch!",
 				file_header->version, release_version);
 		return IA_CSS_ERR_VERSION_MISMATCH;
@@ -350,14 +350,7 @@ sh_css_load_blob(const unsigned char *blob, unsigned size)
 	   is required for the CSS DMA to read the instructions. */
 
 	assert(blob != NULL);
-	if (target_addr) {
+	if (target_addr) 
 		mmgr_store(target_addr, blob, size);
-#ifdef HRT_CSIM
-		{
-			unsigned padded_size = CEIL_MUL(size, HIVE_ISP_DDR_WORD_BYTES);
-			mmgr_clear(target_addr + size, padded_size - size);
-		}
-#endif
-	}
 	return target_addr;
 }

drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css_mipi.c

@@ -515,9 +515,6 @@ allocate_mipi_frames(struct ia_css_pipe *pipe, struct ia_css_stream_info *info)
 						pipe, port);
 					return err;
 				}
-#ifdef HRT_CSIM
-				ia_css_frame_zero(my_css.mipi_frames[port][i]);
-#endif
 			}
 			if (info->metadata_info.size > 0) {
 				/* free previous metadata buffer */

drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css_params.c

@@ -3705,23 +3705,6 @@ static void sh_css_update_isp_params_to_ddr(
 
 	assert(params != NULL);
 
-#ifdef HRT_CSIM
-	{
-		/* ispparm struct is read with DMA which reads
-		 * multiples of the DDR word with (32 bytes):
-		 * So we pad with zeroes to prevent warnings in csim.
-		 */
-		unsigned int aligned_width, padding_bytes;
-		hrt_vaddress pad_ptr;
-
-		aligned_width = CEIL_MUL(
-				  size,
-				  HIVE_ISP_DDR_WORD_BYTES);
-		padding_bytes = aligned_width - size;
-		pad_ptr = ddr_ptr + size;
-		mmgr_clear(pad_ptr, padding_bytes);
-	}
-#endif
 	mmgr_store(ddr_ptr, &(params->uds), size);
 	IA_CSS_LEAVE_PRIVATE("void");
 }
@@ -4073,18 +4056,6 @@ sh_css_params_write_to_ddr_internal(
 					return err;
 				}
 			}
-#ifdef HRT_CSIM
-			else {
-				hrt_vaddress ptr =
-					(hrt_vaddress)ddr_map->fpn_tbl;
-				/* prevent warnings when reading fpn table
-				 * in csim.*/
-				/* Actual values are not used when fpn is
-				 * disabled. */
-				/* MW: fpn_tbl_size*sizeof(whatever)? */
-				mmgr_clear(ptr, ddr_map_size->fpn_tbl);
-			}
-#endif
 		}
 	}