Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 f5c42271 编写于 作者: R Roland Stigge
浏览文件
操作

ARM: LPC32xx: Device tree support 

This patch does the actual device tree switch for the LPC32xx SoC.
Signed-off-by: NRoland Stigge <stigge@antcom.de>
上级 e04920d9
隐藏空白更改
内联 并排
Showing with 158 addition and 311 deletion
Documentation/devicetree/bindings/arm/lpc32xx-mic.txt 0 → 100644
浏览文件 @ f5c42271
* NXP LPC32xx Main Interrupt Controller
(MIC, including SIC1 and SIC2 secondary controllers)
Required properties:
- compatible: Should be "nxp,lpc3220-mic"
- interrupt-controller: Identifies the node as an interrupt controller.
- interrupt-parent: Empty for the interrupt controller itself
- #interrupt-cells: The number of cells to define the interrupts. Should be 2.
The first cell is the IRQ number
The second cell is used to specify mode:
1 = low-to-high edge triggered
2 = high-to-low edge triggered
4 = active high level-sensitive
8 = active low level-sensitive
Default for internal sources should be set to 4 (active high).
- reg: Should contain MIC registers location and length
Examples:
/*
* MIC
*/
mic: interrupt-controller@40008000 {
compatible = "nxp,lpc3220-mic";
interrupt-controller;
interrupt-parent;
#interrupt-cells = <2>;
reg = <0x40008000 0xC000>;
};
/*
* ADC
*/
adc@40048000 {
compatible = "nxp,lpc3220-adc";
reg = <0x40048000 0x1000>;
interrupt-parent = <&mic>;
interrupts = <39 4>;
};
Documentation/devicetree/bindings/arm/lpc32xx.txt 0 → 100644
浏览文件 @ f5c42271
NXP LPC32xx Platforms Device Tree Bindings
------------------------------------------
Boards with the NXP LPC32xx SoC shall have the following properties:
Required root node property:
compatible: must be "nxp,lpc3220", "nxp,lpc3230", "nxp,lpc3240" or "nxp,lpc3250"
arch/arm/Kconfig
浏览文件 @ f5c42271
......@@ -597,6 +597,7 @@ config ARCH_LPC32XX
select USB_ARCH_HAS_OHCI
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
select USE_OF
help
Support for the NXP LPC32XX family of processors
......
arch/arm/mach-lpc32xx/common.c
浏览文件 @ f5c42271
......@@ -31,198 +31,6 @@
#include <mach/platform.h>
#include "common.h"
/*
* Watchdog timer
*/
static struct resource watchdog_resources[] = {
[0] = {
.start = LPC32XX_WDTIM_BASE,
.end = LPC32XX_WDTIM_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device lpc32xx_watchdog_device = {
.name = "pnx4008-watchdog",
.id = -1,
.num_resources = ARRAY_SIZE(watchdog_resources),
.resource = watchdog_resources,
};
/*
* I2C busses
*/
static struct resource i2c0_resources[] = {
[0] = {
.start = LPC32XX_I2C1_BASE,
.end = LPC32XX_I2C1_BASE + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_LPC32XX_I2C_1,
.end = IRQ_LPC32XX_I2C_1,
.flags = IORESOURCE_IRQ,
},
};
static struct resource i2c1_resources[] = {
[0] = {
.start = LPC32XX_I2C2_BASE,
.end = LPC32XX_I2C2_BASE + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_LPC32XX_I2C_2,
.end = IRQ_LPC32XX_I2C_2,
.flags = IORESOURCE_IRQ,
},
};
static struct resource i2c2_resources[] = {
[0] = {
.start = LPC32XX_OTG_I2C_BASE,
.end = LPC32XX_OTG_I2C_BASE + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_LPC32XX_USB_I2C,
.end = IRQ_LPC32XX_USB_I2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device lpc32xx_i2c0_device = {
.name = "pnx-i2c.0",
.id = 0,
.num_resources = ARRAY_SIZE(i2c0_resources),
.resource = i2c0_resources,
};
struct platform_device lpc32xx_i2c1_device = {
.name = "pnx-i2c.1",
.id = 1,
.num_resources = ARRAY_SIZE(i2c1_resources),
.resource = i2c1_resources,
};
struct platform_device lpc32xx_i2c2_device = {
.name = "pnx-i2c.2",
.id = 2,
.num_resources = ARRAY_SIZE(i2c2_resources),
.resource = i2c2_resources,
};
/* TSC (Touch Screen Controller) */
static struct resource lpc32xx_tsc_resources[] = {
{
.start = LPC32XX_ADC_BASE,
.end = LPC32XX_ADC_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_LPC32XX_TS_IRQ,
.end = IRQ_LPC32XX_TS_IRQ,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device lpc32xx_tsc_device = {
.name = "ts-lpc32xx",
.id = -1,
.num_resources = ARRAY_SIZE(lpc32xx_tsc_resources),
.resource = lpc32xx_tsc_resources,
};
/* RTC */
static struct resource lpc32xx_rtc_resources[] = {
{
.start = LPC32XX_RTC_BASE,
.end = LPC32XX_RTC_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},{
.start = IRQ_LPC32XX_RTC,
.end = IRQ_LPC32XX_RTC,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device lpc32xx_rtc_device = {
.name = "rtc-lpc32xx",
.id = -1,
.num_resources = ARRAY_SIZE(lpc32xx_rtc_resources),
.resource = lpc32xx_rtc_resources,
};
/*
* ADC support
*/
static struct resource adc_resources[] = {
{
.start = LPC32XX_ADC_BASE,
.end = LPC32XX_ADC_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_LPC32XX_TS_IRQ,
.end = IRQ_LPC32XX_TS_IRQ,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device lpc32xx_adc_device = {
.name = "lpc32xx-adc",
.id = -1,
.num_resources = ARRAY_SIZE(adc_resources),
.resource = adc_resources,
};
/*
* USB support
*/
/* The dmamask must be set for OHCI to work */
static u64 ohci_dmamask = ~(u32) 0;
static struct resource ohci_resources[] = {
{
.start = IO_ADDRESS(LPC32XX_USB_BASE),
.end = IO_ADDRESS(LPC32XX_USB_BASE + 0x100 - 1),
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_LPC32XX_USB_HOST,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device lpc32xx_ohci_device = {
.name = "usb-ohci",
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
.coherent_dma_mask = 0xFFFFFFFF,
},
.num_resources = ARRAY_SIZE(ohci_resources),
.resource = ohci_resources,
};
/*
* Network Support
*/
static struct resource net_resources[] = {
[0] = DEFINE_RES_MEM(LPC32XX_ETHERNET_BASE, SZ_4K),
[1] = DEFINE_RES_MEM(LPC32XX_IRAM_BASE, SZ_128K),
[2] = DEFINE_RES_IRQ(IRQ_LPC32XX_ETHERNET),
};
static u64 lpc32xx_mac_dma_mask = 0xffffffffUL;
struct platform_device lpc32xx_net_device = {
.name = "lpc-eth",
.id = 0,
.dev = {
.dma_mask = &lpc32xx_mac_dma_mask,
.coherent_dma_mask = 0xffffffffUL,
},
.num_resources = ARRAY_SIZE(net_resources),
.resource = net_resources,
};
/*
* Returns the unique ID for the device
*/
......
arch/arm/mach-lpc32xx/common.h
浏览文件 @ f5c42271
......@@ -22,19 +22,6 @@
#include <mach/board.h>
#include <linux/platform_device.h>
/*
* Arch specific platform device structures
*/
extern struct platform_device lpc32xx_watchdog_device;
extern struct platform_device lpc32xx_i2c0_device;
extern struct platform_device lpc32xx_i2c1_device;
extern struct platform_device lpc32xx_i2c2_device;
extern struct platform_device lpc32xx_tsc_device;
extern struct platform_device lpc32xx_adc_device;
extern struct platform_device lpc32xx_rtc_device;
extern struct platform_device lpc32xx_ohci_device;
extern struct platform_device lpc32xx_net_device;
/*
* Other arch specific structures and functions
*/
......@@ -42,7 +29,6 @@ extern struct sys_timer lpc32xx_timer;
extern void __init lpc32xx_init_irq(void);
extern void __init lpc32xx_map_io(void);
extern void __init lpc32xx_serial_init(void);
extern void __init lpc32xx_gpio_init(void);
extern void lpc23xx_restart(char, const char *);
......
arch/arm/mach-lpc32xx/irq.c
浏览文件 @ f5c42271
......@@ -22,6 +22,11 @@
#include <linux/irq.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
......@@ -44,6 +49,9 @@
#define SIC1_ATR_DEFAULT 0x00026000
#define SIC2_ATR_DEFAULT 0x00000000
static struct irq_domain *lpc32xx_mic_domain;
static struct device_node *lpc32xx_mic_np;
struct lpc32xx_event_group_regs {
void __iomem *enab_reg;
void __iomem *edge_reg;
......@@ -203,7 +211,7 @@ static void lpc32xx_mask_irq(struct irq_data *d)
{
unsigned int reg, ctrl, mask;
get_controller(d->irq, &ctrl, &mask);
get_controller(d->hwirq, &ctrl, &mask);
reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) & ~mask;
__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
......@@ -213,7 +221,7 @@ static void lpc32xx_unmask_irq(struct irq_data *d)
{
unsigned int reg, ctrl, mask;
get_controller(d->irq, &ctrl, &mask);
get_controller(d->hwirq, &ctrl, &mask);
reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) | mask;
__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
......@@ -223,14 +231,14 @@ static void lpc32xx_ack_irq(struct irq_data *d)
{
unsigned int ctrl, mask;
get_controller(d->irq, &ctrl, &mask);
get_controller(d->hwirq, &ctrl, &mask);
__raw_writel(mask, LPC32XX_INTC_RAW_STAT(ctrl));
/* Also need to clear pending wake event */
if (lpc32xx_events[d->irq].mask != 0)
__raw_writel(lpc32xx_events[d->irq].mask,
lpc32xx_events[d->irq].event_group->rawstat_reg);
if (lpc32xx_events[d->hwirq].mask != 0)
__raw_writel(lpc32xx_events[d->hwirq].mask,
lpc32xx_events[d->hwirq].event_group->rawstat_reg);
}
static void __lpc32xx_set_irq_type(unsigned int irq, int use_high_level,
......@@ -274,22 +282,22 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type)
switch (type) {
case IRQ_TYPE_EDGE_RISING:
/* Rising edge sensitive */
__lpc32xx_set_irq_type(d->irq, 1, 1);
__lpc32xx_set_irq_type(d->hwirq, 1, 1);
break;
case IRQ_TYPE_EDGE_FALLING:
/* Falling edge sensitive */
__lpc32xx_set_irq_type(d->irq, 0, 1);
__lpc32xx_set_irq_type(d->hwirq, 0, 1);
break;
case IRQ_TYPE_LEVEL_LOW:
/* Low level sensitive */
__lpc32xx_set_irq_type(d->irq, 0, 0);
__lpc32xx_set_irq_type(d->hwirq, 0, 0);
break;
case IRQ_TYPE_LEVEL_HIGH:
/* High level sensitive */
__lpc32xx_set_irq_type(d->irq, 1, 0);
__lpc32xx_set_irq_type(d->hwirq, 1, 0);
break;
/* Other modes are not supported */
......@@ -298,7 +306,7 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type)
}
/* Ok to use the level handler for all types */
irq_set_handler(d->irq, handle_level_irq);
irq_set_handler(d->hwirq, handle_level_irq);
return 0;
}
......@@ -307,33 +315,33 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
{
unsigned long eventreg;
if (lpc32xx_events[d->irq].mask != 0) {
eventreg = __raw_readl(lpc32xx_events[d->irq].
if (lpc32xx_events[d->hwirq].mask != 0) {
eventreg = __raw_readl(lpc32xx_events[d->hwirq].
event_group->enab_reg);
if (state)
eventreg |= lpc32xx_events[d->irq].mask;
eventreg |= lpc32xx_events[d->hwirq].mask;
else {
eventreg &= ~lpc32xx_events[d->irq].mask;
eventreg &= ~lpc32xx_events[d->hwirq].mask;
/*
* When disabling the wakeup, clear the latched
* event
*/
__raw_writel(lpc32xx_events[d->irq].mask,
lpc32xx_events[d->irq].
__raw_writel(lpc32xx_events[d->hwirq].mask,
lpc32xx_events[d->hwirq].
event_group->rawstat_reg);
}
__raw_writel(eventreg,
lpc32xx_events[d->irq].event_group->enab_reg);
lpc32xx_events[d->hwirq].event_group->enab_reg);
return 0;
}
/* Clear event */
__raw_writel(lpc32xx_events[d->irq].mask,
lpc32xx_events[d->irq].event_group->rawstat_reg);
__raw_writel(lpc32xx_events[d->hwirq].mask,
lpc32xx_events[d->hwirq].event_group->rawstat_reg);
return -ENODEV;
}
......@@ -353,6 +361,7 @@ static void __init lpc32xx_set_default_mappings(unsigned int apr,
}
static struct irq_chip lpc32xx_irq_chip = {
.name = "MIC",
.irq_ack = lpc32xx_ack_irq,
.irq_mask = lpc32xx_mask_irq,
.irq_unmask = lpc32xx_unmask_irq,
......@@ -386,9 +395,23 @@ static void lpc32xx_sic2_handler(unsigned int irq, struct irq_desc *desc)
}
}
static int __init __lpc32xx_mic_of_init(struct device_node *node,
struct device_node *parent)
{
lpc32xx_mic_np = node;
return 0;
}
static const struct of_device_id mic_of_match[] __initconst = {
{ .compatible = "nxp,lpc3220-mic", .data = __lpc32xx_mic_of_init },
{ }
};
void __init lpc32xx_init_irq(void)
{
unsigned int i;
int irq_base;
/* Setup MIC */
__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
......@@ -448,4 +471,19 @@ void __init lpc32xx_init_irq(void)
LPC32XX_CLKPWR_PIN_RS);
__raw_writel(__raw_readl(LPC32XX_CLKPWR_INT_RS),
LPC32XX_CLKPWR_INT_RS);
of_irq_init(mic_of_match);
irq_base = irq_alloc_descs(-1, 0, NR_IRQS, 0);
if (irq_base < 0) {
pr_warn("Cannot allocate irq_descs, assuming pre-allocated\n");
irq_base = 0;
}
lpc32xx_mic_domain = irq_domain_add_legacy(lpc32xx_mic_np, NR_IRQS,
irq_base, 0,
&irq_domain_simple_ops,
NULL);
if (!lpc32xx_mic_domain)
panic("Unable to add MIC irq domain\n");
}
arch/arm/mach-lpc32xx/phy3250.c
浏览文件 @ f5c42271
/*
* arch/arm/mach-lpc32xx/phy3250.c
* Platform support for LPC32xx SoC
*
* Author: Kevin Wells <kevin.wells@nxp.com>
*
* Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
* Copyright (C) 2010 NXP Semiconductors
*
* This program is free software; you can redistribute it and/or modify
......@@ -25,11 +26,16 @@
#include <linux/device.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/amba/pl022.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/amba/pl08x.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
......@@ -47,7 +53,6 @@
#define SPI0_CS_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
#define LED_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 1)
/*
* AMBA LCD controller
......@@ -150,9 +155,6 @@ static struct clcd_board lpc32xx_clcd_data = {
.remove = lpc32xx_clcd_remove,
};
static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0,
LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data);
/*
* AMBA SSP (SPI)
*/
......@@ -180,8 +182,11 @@ static struct pl022_ssp_controller lpc32xx_ssp0_data = {
.enable_dma = 0,
};
static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0,
LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data);
static struct pl022_ssp_controller lpc32xx_ssp1_data = {
.bus_id = 1,
.num_chipselect = 1,
.enable_dma = 0,
};
/* AT25 driver registration */
static int __init phy3250_spi_board_register(void)
......@@ -221,73 +226,20 @@ static int __init phy3250_spi_board_register(void)
}
arch_initcall(phy3250_spi_board_register);
static struct i2c_board_info __initdata phy3250_i2c_board_info[] = {
{
I2C_BOARD_INFO("pcf8563", 0x51),
},
static struct pl08x_platform_data pl08x_pd = {
};
static struct gpio_led phy_leds[] = {
{
.name = "led0",
.gpio = LED_GPIO,
.active_low = 1,
.default_trigger = "heartbeat",
},
static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", &lpc32xx_ssp0_data),
OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data),
OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
{ }
};
static struct gpio_led_platform_data led_data = {
.leds = phy_leds,
.num_leds = ARRAY_SIZE(phy_leds),
};
static struct platform_device lpc32xx_gpio_led_device = {
.name = "leds-gpio",
.id = -1,
.dev.platform_data = &led_data,
};
static struct platform_device *phy3250_devs[] __initdata = {
&lpc32xx_rtc_device,
&lpc32xx_tsc_device,
&lpc32xx_i2c0_device,
&lpc32xx_i2c1_device,
&lpc32xx_i2c2_device,
&lpc32xx_watchdog_device,
&lpc32xx_gpio_led_device,
&lpc32xx_adc_device,
&lpc32xx_ohci_device,
&lpc32xx_net_device,
};
static struct amba_device *amba_devs[] __initdata = {
&lpc32xx_clcd_device,
&lpc32xx_ssp0_device,
};
/*
* Board specific functions
*/
static void __init phy3250_board_init(void)
static void __init lpc3250_machine_init(void)
{
u32 tmp;
int i;
lpc32xx_gpio_init();
/* Register GPIOs used on this board */
if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
printk(KERN_ERR "Error requesting gpio %u",
SPI0_CS_GPIO);
else if (gpio_direction_output(SPI0_CS_GPIO, 1))
printk(KERN_ERR "Error setting gpio %u to output",
SPI0_CS_GPIO);
/* Setup network interface for RMII mode */
tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
__raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
/* Setup SLC NAND controller muxing */
__raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
......@@ -300,6 +252,12 @@ static void __init phy3250_board_init(void)
tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
__raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
/* Set up USB power */
tmp = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
tmp |= LPC32XX_CLKPWR_USBCTRL_HCLK_EN |
LPC32XX_CLKPWR_USBCTRL_USBI2C_EN;
__raw_writel(tmp, LPC32XX_CLKPWR_USB_CTRL);
/* Set up I2C pull levels */
tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE |
......@@ -321,33 +279,35 @@ static void __init phy3250_board_init(void)
/*
* AMBA peripheral clocks need to be enabled prior to AMBA device
* detection or a data fault will occur, so enable the clocks
* here. However, we don't want to enable them if the peripheral
* isn't included in the image
* here.
*/
#ifdef CONFIG_FB_ARMCLCD
tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
__raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
LPC32XX_CLKPWR_LCDCLK_CTRL);
#endif
#ifdef CONFIG_SPI_PL022
tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
__raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
LPC32XX_CLKPWR_SSP_CLK_CTRL);
#endif
platform_add_devices(phy3250_devs, ARRAY_SIZE(phy3250_devs));
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
tmp = __raw_readl(LPC32XX_CLKPWR_DMA_CLK_CTRL);
__raw_writel((tmp | LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN),
LPC32XX_CLKPWR_DMA_CLK_CTRL);
/* Test clock needed for UDA1380 initial init */
__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
LPC32XX_CLKPWR_TEST_CLK_SEL);
i2c_register_board_info(0, phy3250_i2c_board_info,
ARRAY_SIZE(phy3250_i2c_board_info));
of_platform_populate(NULL, of_default_bus_match_table,
lpc32xx_auxdata_lookup, NULL);
/* Register GPIOs used on this board */
if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
printk(KERN_ERR "Error requesting gpio %u",
SPI0_CS_GPIO);
else if (gpio_direction_output(SPI0_CS_GPIO, 1))
printk(KERN_ERR "Error setting gpio %u to output",
SPI0_CS_GPIO);
}
static int __init lpc32xx_display_uid(void)
......@@ -363,12 +323,20 @@ static int __init lpc32xx_display_uid(void)
}
arch_initcall(lpc32xx_display_uid);
MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
/* Maintainer: Kevin Wells, NXP Semiconductors */
static char const *lpc32xx_dt_compat[] __initdata = {
"nxp,lpc3220",
"nxp,lpc3230",
"nxp,lpc3240",
"nxp,lpc3250",
NULL
};
DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)")
.atag_offset = 0x100,
.map_io = lpc32xx_map_io,
.init_irq = lpc32xx_init_irq,
.timer = &lpc32xx_timer,
.init_machine = phy3250_board_init,
.init_machine = lpc3250_machine_init,
.dt_compat = lpc32xx_dt_compat,
.restart = lpc23xx_restart,
MACHINE_END
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或