提交 f4b5a803 编写于 作者: V Vladimir Kondratiev 提交者: John W. Linville

wil6210: fix for HW bug in interrupt setup logic

Hardware bug triggered by the MSI init while INTx asserted for some reason.
De-assert INTx prior to MSI set-up
Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 98a65b59
......@@ -493,6 +493,23 @@ static int wil6210_request_3msi(struct wil6210_priv *wil, int irq)
return rc;
}
/* can't use wil_ioread32_and_clear because ICC value is not ser yet */
static inline void wil_clear32(void __iomem *addr)
{
u32 x = ioread32(addr);
iowrite32(x, addr);
}
void wil6210_clear_irq(struct wil6210_priv *wil)
{
wil_clear32(wil->csr + HOSTADDR(RGF_DMA_EP_RX_ICR) +
offsetof(struct RGF_ICR, ICR));
wil_clear32(wil->csr + HOSTADDR(RGF_DMA_EP_TX_ICR) +
offsetof(struct RGF_ICR, ICR));
wil_clear32(wil->csr + HOSTADDR(RGF_DMA_EP_MISC_ICR) +
offsetof(struct RGF_ICR, ICR));
}
int wil6210_init_irq(struct wil6210_priv *wil, int irq)
{
......
......@@ -153,6 +153,7 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_drvdata(pdev, wil);
wil->pdev = pdev;
wil6210_clear_irq(wil);
/* FW should raise IRQ when ready */
rc = wil_if_pcie_enable(wil);
if (rc) {
......
......@@ -476,6 +476,7 @@ int wmi_rxon(struct wil6210_priv *wil, bool on);
int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_m, u32 *t_r);
int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, u16 reason);
void wil6210_clear_irq(struct wil6210_priv *wil);
int wil6210_init_irq(struct wil6210_priv *wil, int irq);
void wil6210_fini_irq(struct wil6210_priv *wil, int irq);
void wil6210_disable_irq(struct wil6210_priv *wil);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册