V4L/DVB (4115): Saa7134 card (LifeView3000 NTSC)

Add detection for the LifeView3000 NTSC model (right now the PAL version is
the only one in there, which is sort of annoying for me living in the US
and all..  sigh...)
This is one of those things that I like to classify "as a works for me so
take it or leave it" :-) .  Not that worried because its an $18 video
capture card that didn't look it was selling to well in the US, but then
again who knows.
The documentation needs updating too I bet but its behind anyways usually
to what is in the code.
Signed-off-by: NZac Bowling <zac@zacbowling.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/saa7134/saa7134-cards.c

@@ -2842,6 +2842,55 @@ struct saa7134_board saa7134_boards[] = {
 			.gpio = 0x000000,	/* GPIO21=Low for FM radio antenna */
 		},
 	},
+	[SAA7134_BOARD_FLYVIDEO3000_NTSC] = {
+		/* "Zac Bowling" <zac@zacbowling.com> */
+		.name           = "LifeView FlyVIDEO3000 (NTSC)",
+		.audio_clock    = 0x00200000,
+		.tuner_type     = TUNER_PHILIPS_NTSC,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+
+		.gpiomask       = 0xe000,
+		.inputs         = {{
+			.name = name_tv,
+			.vmux = 1,
+			.amux = TV,
+			.gpio = 0x8000,
+			.tv   = 1,
+		},{
+			.name = name_tv_mono,
+			.vmux = 1,
+			.amux = LINE2,
+			.gpio = 0x0000,
+			.tv   = 1,
+		},{
+			.name = name_comp1,
+			.vmux = 0,
+			.amux = LINE2,
+			.gpio = 0x4000,
+		},{
+			.name = name_comp2,
+			.vmux = 3,
+			.amux = LINE2,
+			.gpio = 0x4000,
+		},{
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE2,
+			.gpio = 0x4000,
+		}},
+		.radio = {
+			.name = name_radio,
+			.amux = LINE2,
+			.gpio = 0x2000,
+		},
+			.mute = {
+			.name = name_mute,
+			.amux = TV,
+			.gpio = 0x8000,
+		},
+	},
 };
 
 const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -2898,6 +2947,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subvendor    = 0x153b,
 		.subdevice    = 0x1162,
 		.driver_data  = SAA7134_BOARD_CINERGY400_CARDBUS,
+	},{
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
+		.subvendor    = 0x5169,
+		.subdevice    = 0x0138,
+		.driver_data  = SAA7134_BOARD_FLYVIDEO3000_NTSC,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -3459,6 +3514,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 	switch (dev->board) {
 	case SAA7134_BOARD_FLYVIDEO2000:
 	case SAA7134_BOARD_FLYVIDEO3000:
+	case SAA7134_BOARD_FLYVIDEO3000_NTSC:
 		dev->has_remote = SAA7134_REMOTE_GPIO;
 		board_flyvideo(dev);
 		break;

drivers/media/video/saa7134/saa7134.h

@@ -222,6 +222,7 @@ struct saa7134_format {
 #define SAA7134_BOARD_AVERMEDIA_A169_B1 92
 #define SAA7134_BOARD_MD7134_BRIDGE_2     93
 #define SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS 94
+#define SAA7134_BOARD_FLYVIDEO3000_NTSC 95
 
 #define SAA7134_MAXBOARDS 8
 #define SAA7134_INPUT_MAX 8