提交 f4896f15 编写于 作者: V Ville Syrjälä 提交者: Daniel Vetter

drm/i915: Make the DP rates int instead of uint32_t

No point in using uint32_t here, just plain old int will do.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NTodd Previte <tprevite@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 ec7adb6e
......@@ -85,10 +85,9 @@ static const struct dp_link_dpll chv_dpll[] = {
{ .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
};
/* Skylake supports following rates */
static const uint32_t gen9_rates[] = { 162000, 216000, 270000, 324000,
432000, 540000 };
static const uint32_t default_rates[] = { 162000, 270000, 540000 };
static const int gen9_rates[] = { 162000, 216000, 270000,
324000, 432000, 540000 };
static const int default_rates[] = { 162000, 270000, 540000 };
/**
* is_edp - is the given port attached to an eDP panel (either CPU or PCH)
......@@ -1142,7 +1141,7 @@ hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config, int link_bw)
}
static int
intel_read_sink_rates(struct intel_dp *intel_dp, uint32_t *sink_rates)
intel_read_sink_rates(struct intel_dp *intel_dp, int *sink_rates)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
int i = 0;
......@@ -1169,7 +1168,7 @@ intel_read_sink_rates(struct intel_dp *intel_dp, uint32_t *sink_rates)
}
static int
intel_read_source_rates(struct intel_dp *intel_dp, uint32_t *source_rates)
intel_read_source_rates(struct intel_dp *intel_dp, int *source_rates)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
int i;
......@@ -1220,8 +1219,9 @@ intel_dp_set_clock(struct intel_encoder *encoder,
}
}
static int intel_supported_rates(const uint32_t *source_rates, int source_len,
const uint32_t *sink_rates, int sink_len, uint32_t *supported_rates)
static int intel_supported_rates(const int *source_rates, int source_len,
const int *sink_rates, int sink_len,
int *supported_rates)
{
int i = 0, j = 0, k = 0;
......@@ -1248,7 +1248,7 @@ const uint32_t *sink_rates, int sink_len, uint32_t *supported_rates)
return k;
}
static int rate_to_index(uint32_t find, const uint32_t *rates)
static int rate_to_index(int find, const int *rates)
{
int i = 0;
......@@ -1278,9 +1278,9 @@ intel_dp_compute_config(struct intel_encoder *encoder,
int max_clock;
int bpp, mode_rate;
int link_avail, link_clock;
uint32_t sink_rates[8];
uint32_t supported_rates[8] = {0};
uint32_t source_rates[8];
int sink_rates[8];
int supported_rates[8] = {0};
int source_rates[8];
int source_len, sink_len, supported_len;
sink_len = intel_read_sink_rates(intel_dp, sink_rates);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册