V4L/DVB: Documentation: update now that the vtx/videotext API has been removed

Remove all references to /dev/vtx in the documentation, except for
some historical comments in dev-teletext.xml.

Documentation/devices.txt is not updated, this will go through Alan Cox
who maintains this file.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Documentation/DocBook/v4l/compat.xml

@@ -21,11 +21,15 @@ API.</para>
       <title>Opening and Closing Devices</title>
 
       <para>For compatibility reasons the character device file names
-recommended for V4L2 video capture, overlay, radio, teletext and raw
+recommended for V4L2 video capture, overlay, radio and raw
 vbi capture devices did not change from those used by V4L. They are
 listed in <xref linkend="devices" /> and below in <xref
 	  linkend="v4l-dev" />.</para>
 
+      <para>The teletext devices (minor range 192-223) have been removed in
+V4L2 and no longer exist. There is no hardware available anymore for handling
+pure teletext. Instead raw or sliced VBI is used.</para>
+
       <para>The V4L <filename>videodev</filename> module automatically
 assigns minor numbers to drivers in load order, depending on the
 registered device type. We recommend that V4L2 drivers by default
@@ -65,13 +69,6 @@ not compatible with V4L or V4L2.</para> </footnote>,
 <filename>/dev/radio63</filename></para></entry>
 	      <entry>64-127</entry>
 	    </row>
-	    <row>
-	      <entry>Teletext decoder</entry>
-	      <entry><para><filename>/dev/vtx</filename>,
-<filename>/dev/vtx0</filename> to
-<filename>/dev/vtx31</filename></para></entry>
-	      <entry>192-223</entry>
-	    </row>
 	    <row>
 	      <entry>Raw VBI capture</entry>
 	      <entry><para><filename>/dev/vbi</filename>,
@@ -2345,6 +2342,17 @@ more information.</para>
 	</listitem>
       </orderedlist>
     </section>
+    <section>
+      <title>V4L2 in Linux 2.6.37</title>
+      <orderedlist>
+	<listitem>
+	  <para>Remove the vtx (videotext/teletext) API. This API was no longer
+used and no hardware exists to verify the API. Nor were any userspace applications found
+that used it. It was originally scheduled for removal in 2.6.35.
+	  </para>
+	</listitem>
+      </orderedlist>
+    </section>
 
     <section id="other">
       <title>Relation of V4L2 to other Linux multimedia APIs</title>

Documentation/DocBook/v4l/dev-teletext.xml

   <title>Teletext Interface</title>
 
-  <para>This interface aims at devices receiving and demodulating
+  <para>This interface was aimed at devices receiving and demodulating
 Teletext data [<xref linkend="ets300706" />, <xref linkend="itu653" />], evaluating the
 Teletext packages and storing formatted pages in cache memory. Such
 devices are usually implemented as microcontrollers with serial
-interface (I<superscript>2</superscript>C) and can be found on older
+interface (I<superscript>2</superscript>C) and could be found on old
 TV cards, dedicated Teletext decoding cards and home-brew devices
 connected to the PC parallel port.</para>
 
-  <para>The Teletext API was designed by Martin Buck. It is defined in
+  <para>The Teletext API was designed by Martin Buck. It was defined in
 the kernel header file <filename>linux/videotext.h</filename>, the
 specification is available from <ulink url="ftp://ftp.gwdg.de/pub/linux/misc/videotext/">
 ftp://ftp.gwdg.de/pub/linux/misc/videotext/</ulink>. (Videotext is the name of
-the German public television Teletext service.) Conventional character
-device file names are <filename>/dev/vtx</filename> and
-<filename>/dev/vttuner</filename>, with device number 83, 0 and 83, 16
-respectively. A similar interface exists for the Philips SAA5249
-Teletext decoder [specification?] with character device file names
-<filename>/dev/tlkN</filename>, device number 102, N.</para>
+the German public television Teletext service.)</para>
 
   <para>Eventually the Teletext API was integrated into the V4L API
 with character device file names <filename>/dev/vtx0</filename> to
 <filename>/dev/vtx31</filename>, device major number 81, minor numbers
-192 to 223. For reference the V4L Teletext API specification is
-reproduced here in full: "Teletext interfaces talk the existing VTX
-API." Teletext devices with major number 83 and 102 will be removed in
-Linux 2.6.</para>
+192 to 223.</para>
 
-  <para>There are no plans to replace the Teletext API or to integrate
-it into V4L2. Please write to the linux-media mailing list: &v4l-ml;
-when the need arises.</para>
+  <para>However, teletext decoders were quickly replaced by more
+generic VBI demodulators and those dedicated teletext decoders no longer exist.
+For many years the vtx devices were still around, even though nobody used
+them. So the decision was made to finally remove support for the Teletext API in
+kernel 2.6.37.</para>
+
+  <para>Modern devices all use the <link linkend="raw-vbi">raw</link> or
+<link linkend="sliced">sliced</link> VBI API.</para>
 
   <!--
 Local Variables:

Documentation/DocBook/v4l/v4l2.xml

@@ -99,6 +99,7 @@ Remote Controller chapter.</contrib>
       <year>2007</year>
       <year>2008</year>
       <year>2009</year>
+      <year>2010</year>
       <holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin
 Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder>
     </copyright>
@@ -110,9 +111,16 @@ Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder>
       <!-- Put document revisions here, newest first. -->
       <!-- API revisions (changes and additions of defines, enums,
 structs, ioctls) must be noted in more detail in the history chapter
-(compat.sgml), along with the possible impact on existing drivers and
+(compat.xml), along with the possible impact on existing drivers and
 applications. -->
 
+      <revision>
+	<revnumber>2.6.37</revnumber>
+	<date>2010-08-06</date>
+	<authorinitials>hv</authorinitials>
+	<revremark>Removed obsolete vtx (videotext) API.</revremark>
+      </revision>
+
       <revision>
 	<revnumber>2.6.33</revnumber>
 	<date>2009-12-03</date>

Documentation/feature-removal-schedule.txt

@@ -498,29 +498,6 @@ When:	April 2011
 Why:	Superseded by xt_CT
 Who:	Netfilter developer team <netfilter-devel@vger.kernel.org>
 
----------------------------
-
-What:	video4linux /dev/vtx teletext API support
-When:	2.6.35
-Files:	drivers/media/video/saa5246a.c drivers/media/video/saa5249.c
-	include/linux/videotext.h
-Why:	The vtx device nodes have been superseded by vbi device nodes
-	for many years. No applications exist that use the vtx support.
-	Of the two i2c drivers that actually support this API the saa5249
-	has been impossible to use for a year now and no known hardware
-	that supports this device exists. The saa5246a is theoretically
-	supported by the old mxb boards, but it never actually worked.
-
-	In summary: there is no hardware that can use this API and there
-	are no applications actually implementing this API.
-
-	The vtx support still reserves minors 192-223 and we would really
-	like to reuse those for upcoming new functionality. In the unlikely
-	event that new hardware appears that wants to use the functionality
-	provided by the vtx API, then that functionality should be build
-	around the sliced VBI API instead.
-Who:	Hans Verkuil <hverkuil@xs4all.nl>
-
 ----------------------------
 
 What:	IRQF_DISABLED

Documentation/ioctl/ioctl-number.txt

@@ -278,7 +278,6 @@ Code  Seq#(hex)	Include File		Comments
 					<mailto:oe@port.de>
 'z'	10-4F	drivers/s390/crypto/zcrypt_api.h	conflict!
 0x80	00-1F	linux/fb.h
-0x81	00-1F	linux/videotext.h
 0x88	00-3F	media/ovcamchip.h
 0x89	00-06	arch/x86/include/asm/sockios.h
 0x89	0B-DF	linux/sockios.h

Documentation/video4linux/bttv/MAKEDEV

@@ -19,7 +19,6 @@ function makedev () {
 echo "*** new device names ***"
 makedev video 0
 makedev radio 64
-makedev vtx 192
 makedev vbi 224
 
 #echo "*** old device names (for compatibility only) ***"

Documentation/video4linux/v4l2-framework.txt

@@ -44,8 +44,8 @@ All drivers have the following structure:
 
 2) A way of initializing and commanding sub-devices (if any).
 
-3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX, /dev/radioX and
-   /dev/vtxX) and keeping track of device-node specific data.
+3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX and /dev/radioX)
+   and keeping track of device-node specific data.
 
 4) Filehandle-specific structs containing per-filehandle data;
 
@@ -488,7 +488,6 @@ types exist:
 VFL_TYPE_GRABBER: videoX for video input/output devices
 VFL_TYPE_VBI: vbiX for vertical blank data (i.e. closed captions, teletext)
 VFL_TYPE_RADIO: radioX for radio tuners
-VFL_TYPE_VTX: vtxX for teletext devices (deprecated, don't use)
 
 The last argument gives you a certain amount of control over the device
 device node number used (i.e. the X in videoX). Normally you will pass -1