Merge branch 'for-linus' of git://opensource.wolfsonmicro.com/regulator

* 'for-linus' of git://opensource.wolfsonmicro.com/regulator: (22 commits)
  regulator: Constify constraints name
  regulator: Fix possible nullpointer dereference in regulator_enable()
  regulator: gpio-regulator add dependency on GENERIC_GPIO
  regulator: Add module.h include to gpio-regulator
  regulator: Add driver for gpio-controlled regulators
  regulator: remove duplicate REG_CTRL2 defines in tps65023
  regulator: Clarify documentation for regulator-regulator supplies
  regulator: Fix some bitrot in the machine driver documentation
  regulator: tps65023: Added support for the similiar TPS65020 chip
  regulator: tps65023: Setting correct core regulator for tps65021
  regulator: tps65023: Set missing bit for update core-voltage
  regulator: tps65023: Fixes i2c configuration issues
  regulator: Add debugfs file showing the supply map table
  regulator: tps6586x: add SMx slew rate setting
  regulator: tps65023: Fixes i2c configuration issues
  regulator: tps6507x: Remove num_voltages array
  regulator: max8952: removed unused mutex.
  regulator: fix regulator/consumer.h kernel-doc warning
  regulator: Ensure enough enable time for max8649
  regulator: 88pm8607: Fix off-by-one value range checking in the case of no id is matched
  ...

Documentation/power/regulator/machine.txt

@@ -16,7 +16,7 @@ initialisation code by creating a struct regulator_consumer_supply for
 each regulator.
 
 struct regulator_consumer_supply {
-	struct device *dev;	/* consumer */
+	const char *dev_name;	/* consumer dev_name() */
 	const char *supply;	/* consumer supply - e.g. "vcc" */
 };
 
@@ -24,13 +24,13 @@ e.g. for the machine above
 
 static struct regulator_consumer_supply regulator1_consumers[] = {
 {
-	.dev	= &platform_consumerB_device.dev,
-	.supply	= "Vcc",
+	.dev_name	= "dev_name(consumer B)",
+	.supply		= "Vcc",
 },};
 
 static struct regulator_consumer_supply regulator2_consumers[] = {
 {
-	.dev	= &platform_consumerA_device.dev,
+	.dev	= "dev_name(consumer A"),
 	.supply	= "Vcc",
 },};
 
@@ -43,6 +43,7 @@ to their supply regulator :-
 
 static struct regulator_init_data regulator1_data = {
 	.constraints = {
+		.name = "Regulator-1",
 		.min_uV = 3300000,
 		.max_uV = 3300000,
 		.valid_modes_mask = REGULATOR_MODE_NORMAL,
@@ -51,13 +52,19 @@ static struct regulator_init_data regulator1_data = {
 	.consumer_supplies = regulator1_consumers,
 };
 
+The name field should be set to something that is usefully descriptive
+for the board for configuration of supplies for other regulators and
+for use in logging and other diagnostic output.  Normally the name
+used for the supply rail in the schematic is a good choice.  If no
+name is provided then the subsystem will choose one.
+
 Regulator-1 supplies power to Regulator-2. This relationship must be registered
 with the core so that Regulator-1 is also enabled when Consumer A enables its
 supply (Regulator-2). The supply regulator is set by the supply_regulator
-field below:-
+field below and co:-
 
 static struct regulator_init_data regulator2_data = {
-	.supply_regulator = "regulator_name",
+	.supply_regulator = "Regulator-1",
 	.constraints = {
 		.min_uV = 1800000,
 		.max_uV = 2000000,

drivers/regulator/88pm8607.c

@@ -412,7 +412,7 @@ static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
 		if (info->desc.id == res->start)
 			break;
 	}
-	if ((i < 0) || (i > PM8607_ID_RG_MAX)) {
+	if (i == ARRAY_SIZE(pm8607_regulator_info)) {
 		dev_err(&pdev->dev, "Failed to find regulator %llu\n",
 			(unsigned long long)res->start);
 		return -EINVAL;

drivers/regulator/Kconfig

@@ -64,6 +64,16 @@ config REGULATOR_USERSPACE_CONSUMER
 
           If unsure, say no.
 
+config REGULATOR_GPIO
+	tristate "GPIO regulator support"
+	depends on GENERIC_GPIO
+	help
+	  This driver provides support for regulators that can be
+	  controlled via gpios.
+	  It is capable of supporting current and voltage regulators
+	  and the platform has to provide a mapping of GPIO-states
+	  to target volts/amps.
+
 config REGULATOR_BQ24022
 	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
 	help

drivers/regulator/Makefile

@@ -8,6 +8,7 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
 obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
 obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 
+obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
 obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
 obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o

drivers/regulator/aat2870-regulator.c

@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>

drivers/regulator/core.c

@@ -1425,7 +1425,7 @@ int regulator_enable(struct regulator *regulator)
 	ret = _regulator_enable(rdev);
 	mutex_unlock(&rdev->mutex);
 
-	if (ret != 0)
+	if (ret != 0 && rdev->supply)
 		regulator_disable(rdev->supply);
 
 	return ret;
@@ -2971,6 +2971,43 @@ void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data)
 }
 EXPORT_SYMBOL_GPL(regulator_get_init_drvdata);
 
+#ifdef CONFIG_DEBUG_FS
+static ssize_t supply_map_read_file(struct file *file, char __user *user_buf,
+				    size_t count, loff_t *ppos)
+{
+	char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	ssize_t len, ret = 0;
+	struct regulator_map *map;
+
+	if (!buf)
+		return -ENOMEM;
+
+	list_for_each_entry(map, &regulator_map_list, list) {
+		len = snprintf(buf + ret, PAGE_SIZE - ret,
+			       "%s -> %s.%s\n",
+			       rdev_get_name(map->regulator), map->dev_name,
+			       map->supply);
+		if (len >= 0)
+			ret += len;
+		if (ret > PAGE_SIZE) {
+			ret = PAGE_SIZE;
+			break;
+		}
+	}
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+	kfree(buf);
+
+	return ret;
+}
+
+static const struct file_operations supply_map_fops = {
+	.read = supply_map_read_file,
+	.llseek = default_llseek,
+};
+#endif
+
 static int __init regulator_init(void)
 {
 	int ret;
@@ -2983,6 +3020,10 @@ static int __init regulator_init(void)
 		pr_warn("regulator: Failed to create debugfs directory\n");
 		debugfs_root = NULL;
 	}
+
+	if (IS_ERR(debugfs_create_file("supply_map", 0444, debugfs_root,
+				       NULL, &supply_map_fops)))
+		pr_warn("regulator: Failed to create supplies debugfs\n");
 #endif
 
 	regulator_dummy_init();

drivers/regulator/gpio-regulator.c

+/*
+ * gpio-regulator.c
+ *
+ * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on fixed.c
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This is useful for systems with mixed controllable and
+ * non-controllable regulators, as well as for allowing testing on
+ * systems with no controllable regulators.
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/gpio-regulator.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+struct gpio_regulator_data {
+	struct regulator_desc desc;
+	struct regulator_dev *dev;
+
+	int enable_gpio;
+	bool enable_high;
+	bool is_enabled;
+	unsigned startup_delay;
+
+	struct gpio *gpios;
+	int nr_gpios;
+
+	struct gpio_regulator_state *states;
+	int nr_states;
+
+	int state;
+};
+
+static int gpio_regulator_is_enabled(struct regulator_dev *dev)
+{
+	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+	return data->is_enabled;
+}
+
+static int gpio_regulator_enable(struct regulator_dev *dev)
+{
+	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+	if (gpio_is_valid(data->enable_gpio)) {
+		gpio_set_value_cansleep(data->enable_gpio, data->enable_high);
+		data->is_enabled = true;
+	}
+
+	return 0;
+}
+
+static int gpio_regulator_disable(struct regulator_dev *dev)
+{
+	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+	if (gpio_is_valid(data->enable_gpio)) {
+		gpio_set_value_cansleep(data->enable_gpio, !data->enable_high);
+		data->is_enabled = false;
+	}
+
+	return 0;
+}
+
+static int gpio_regulator_enable_time(struct regulator_dev *dev)
+{
+	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+	return data->startup_delay;
+}
+
+static int gpio_regulator_get_value(struct regulator_dev *dev)
+{
+	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+	int ptr;
+
+	for (ptr = 0; ptr < data->nr_states; ptr++)
+		if (data->states[ptr].gpios == data->state)
+			return data->states[ptr].value;
+
+	return -EINVAL;
+}
+
+static int gpio_regulator_set_value(struct regulator_dev *dev,
+					int min, int max)
+{
+	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+	int ptr, target, state;
+
+	target = -1;
+	for (ptr = 0; ptr < data->nr_states; ptr++)
+		if (data->states[ptr].value >= min &&
+		    data->states[ptr].value <= max)
+			target = data->states[ptr].gpios;
+
+	if (target < 0)
+		return -EINVAL;
+
+	for (ptr = 0; ptr < data->nr_gpios; ptr++) {
+		state = (target & (1 << ptr)) >> ptr;
+		gpio_set_value(data->gpios[ptr].gpio, state);
+	}
+	data->state = target;
+
+	return 0;
+}
+
+static int gpio_regulator_set_voltage(struct regulator_dev *dev,
+					int min_uV, int max_uV,
+					unsigned *selector)
+{
+	return gpio_regulator_set_value(dev, min_uV, max_uV);
+}
+
+static int gpio_regulator_list_voltage(struct regulator_dev *dev,
+				      unsigned selector)
+{
+	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+	if (selector >= data->nr_states)
+		return -EINVAL;
+
+	return data->states[selector].value;
+}
+
+static int gpio_regulator_set_current_limit(struct regulator_dev *dev,
+					int min_uA, int max_uA)
+{
+	return gpio_regulator_set_value(dev, min_uA, max_uA);
+}
+
+static struct regulator_ops gpio_regulator_voltage_ops = {
+	.is_enabled = gpio_regulator_is_enabled,
+	.enable = gpio_regulator_enable,
+	.disable = gpio_regulator_disable,
+	.enable_time = gpio_regulator_enable_time,
+	.get_voltage = gpio_regulator_get_value,
+	.set_voltage = gpio_regulator_set_voltage,
+	.list_voltage = gpio_regulator_list_voltage,
+};
+
+static struct regulator_ops gpio_regulator_current_ops = {
+	.is_enabled = gpio_regulator_is_enabled,
+	.enable = gpio_regulator_enable,
+	.disable = gpio_regulator_disable,
+	.enable_time = gpio_regulator_enable_time,
+	.get_current_limit = gpio_regulator_get_value,
+	.set_current_limit = gpio_regulator_set_current_limit,
+};
+
+static int __devinit gpio_regulator_probe(struct platform_device *pdev)
+{
+	struct gpio_regulator_config *config = pdev->dev.platform_data;
+	struct gpio_regulator_data *drvdata;
+	int ptr, ret, state;
+
+	drvdata = kzalloc(sizeof(struct gpio_regulator_data), GFP_KERNEL);
+	if (drvdata == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate device data\n");
+		return -ENOMEM;
+	}
+
+	drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
+	if (drvdata->desc.name == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate supply name\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	drvdata->gpios = kmemdup(config->gpios,
+				 config->nr_gpios * sizeof(struct gpio),
+				 GFP_KERNEL);
+	if (drvdata->gpios == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate gpio data\n");
+		ret = -ENOMEM;
+		goto err_name;
+	}
+
+	drvdata->states = kmemdup(config->states,
+				  config->nr_states *
+					 sizeof(struct gpio_regulator_state),
+				  GFP_KERNEL);
+	if (drvdata->states == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate state data\n");
+		ret = -ENOMEM;
+		goto err_memgpio;
+	}
+	drvdata->nr_states = config->nr_states;
+
+	drvdata->desc.owner = THIS_MODULE;
+
+	/* handle regulator type*/
+	switch (config->type) {
+	case REGULATOR_VOLTAGE:
+		drvdata->desc.type = REGULATOR_VOLTAGE;
+		drvdata->desc.ops = &gpio_regulator_voltage_ops;
+		drvdata->desc.n_voltages = config->nr_states;
+		break;
+	case REGULATOR_CURRENT:
+		drvdata->desc.type = REGULATOR_CURRENT;
+		drvdata->desc.ops = &gpio_regulator_current_ops;
+		break;
+	default:
+		dev_err(&pdev->dev, "No regulator type set\n");
+		ret = -EINVAL;
+		goto err_memgpio;
+		break;
+	}
+
+	drvdata->enable_gpio = config->enable_gpio;
+	drvdata->startup_delay = config->startup_delay;
+
+	if (gpio_is_valid(config->enable_gpio)) {
+		drvdata->enable_high = config->enable_high;
+
+		ret = gpio_request(config->enable_gpio, config->supply_name);
+		if (ret) {
+			dev_err(&pdev->dev,
+			   "Could not obtain regulator enable GPIO %d: %d\n",
+						config->enable_gpio, ret);
+			goto err_memstate;
+		}
+
+		/* set output direction without changing state
+		 * to prevent glitch
+		 */
+		if (config->enabled_at_boot) {
+			drvdata->is_enabled = true;
+			ret = gpio_direction_output(config->enable_gpio,
+						    config->enable_high);
+		} else {
+			drvdata->is_enabled = false;
+			ret = gpio_direction_output(config->enable_gpio,
+						    !config->enable_high);
+		}
+
+		if (ret) {
+			dev_err(&pdev->dev,
+			   "Could not configure regulator enable GPIO %d direction: %d\n",
+						config->enable_gpio, ret);
+			goto err_enablegpio;
+		}
+	} else {
+		/* Regulator without GPIO control is considered
+		 * always enabled
+		 */
+		drvdata->is_enabled = true;
+	}
+
+	drvdata->nr_gpios = config->nr_gpios;
+	ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
+	if (ret) {
+		dev_err(&pdev->dev,
+		   "Could not obtain regulator setting GPIOs: %d\n", ret);
+		goto err_enablegpio;
+	}
+
+	/* build initial state from gpio init data. */
+	state = 0;
+	for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) {
+		if (config->gpios[ptr].flags & GPIOF_OUT_INIT_HIGH)
+			state |= (1 << ptr);
+	}
+	drvdata->state = state;
+
+	drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev,
+					  config->init_data, drvdata);
+	if (IS_ERR(drvdata->dev)) {
+		ret = PTR_ERR(drvdata->dev);
+		dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
+		goto err_stategpio;
+	}
+
+	platform_set_drvdata(pdev, drvdata);
+
+	return 0;
+
+err_stategpio:
+	gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
+err_enablegpio:
+	if (gpio_is_valid(config->enable_gpio))
+		gpio_free(config->enable_gpio);
+err_memstate:
+	kfree(drvdata->states);
+err_memgpio:
+	kfree(drvdata->gpios);
+err_name:
+	kfree(drvdata->desc.name);
+err:
+	kfree(drvdata);
+	return ret;
+}
+
+static int __devexit gpio_regulator_remove(struct platform_device *pdev)
+{
+	struct gpio_regulator_data *drvdata = platform_get_drvdata(pdev);
+
+	regulator_unregister(drvdata->dev);
+
+	gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
+
+	kfree(drvdata->states);
+	kfree(drvdata->gpios);
+
+	if (gpio_is_valid(drvdata->enable_gpio))
+		gpio_free(drvdata->enable_gpio);
+
+	kfree(drvdata->desc.name);
+	kfree(drvdata);
+
+	return 0;
+}
+
+static struct platform_driver gpio_regulator_driver = {
+	.probe		= gpio_regulator_probe,
+	.remove		= __devexit_p(gpio_regulator_remove),
+	.driver		= {
+		.name		= "gpio-regulator",
+		.owner		= THIS_MODULE,
+	},
+};
+
+static int __init gpio_regulator_init(void)
+{
+	return platform_driver_register(&gpio_regulator_driver);
+}
+subsys_initcall(gpio_regulator_init);
+
+static void __exit gpio_regulator_exit(void)
+{
+	platform_driver_unregister(&gpio_regulator_driver);
+}
+module_exit(gpio_regulator_exit);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("gpio voltage regulator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-regulator");

drivers/regulator/max8649.c

@@ -221,7 +221,7 @@ static int max8649_enable_time(struct regulator_dev *rdev)
 	ret = (ret & MAX8649_RAMP_MASK) >> 5;
 	rate = (32 * 1000) >> ret;	/* uV/uS */
 
-	return (voltage / rate);
+	return DIV_ROUND_UP(voltage, rate);
 }
 
 static int max8649_set_mode(struct regulator_dev *rdev, unsigned int mode)

drivers/regulator/max8952.c

@@ -26,7 +26,6 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/max8952.h>
-#include <linux/mutex.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
 #include <linux/slab.h>
@@ -47,7 +46,6 @@ enum {
 struct max8952_data {
 	struct i2c_client	*client;
 	struct device		*dev;
-	struct mutex		mutex;
 	struct max8952_platform_data *pdata;
 	struct regulator_dev	*rdev;
 
@@ -208,7 +206,6 @@ static int __devinit max8952_pmic_probe(struct i2c_client *client,
 	max8952->client = client;
 	max8952->dev = &client->dev;
 	max8952->pdata = pdata;
-	mutex_init(&max8952->mutex);
 
 	max8952->rdev = regulator_register(&regulator, max8952->dev,
 			&pdata->reg_data, max8952);

drivers/regulator/tps65023-regulator.c

@@ -63,6 +63,13 @@
 #define TPS65023_REG_CTRL_LDO2_EN	BIT(2)
 #define TPS65023_REG_CTRL_LDO1_EN	BIT(1)
 
+/* REG_CTRL2 bitfields */
+#define TPS65023_REG_CTRL2_GO		BIT(7)
+#define TPS65023_REG_CTRL2_CORE_ADJ	BIT(6)
+#define TPS65023_REG_CTRL2_DCDC2	BIT(2)
+#define TPS65023_REG_CTRL2_DCDC1	BIT(1)
+#define TPS65023_REG_CTRL2_DCDC3	BIT(0)
+
 /* LDO_CTRL bitfields */
 #define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id)	((ldo_id)*4)
 #define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id)	(0xF0 >> ((ldo_id)*4))
@@ -85,7 +92,7 @@
 #define TPS65023_MAX_REG_ID		TPS65023_LDO_2
 
 /* Supported voltage values for regulators */
-static const u16 VDCDC1_VSEL_table[] = {
+static const u16 VCORE_VSEL_table[] = {
 	800, 825, 850, 875,
 	900, 925, 950, 975,
 	1000, 1025, 1050, 1075,
@@ -96,20 +103,29 @@ static const u16 VDCDC1_VSEL_table[] = {
 	1500, 1525, 1550, 1600,
 };
 
-static const u16 LDO1_VSEL_table[] = {
+/* Supported voltage values for LDO regulators for tps65020 */
+static const u16 TPS65020_LDO1_VSEL_table[] = {
+	1000, 1050, 1100, 1300,
+	1800, 2500, 3000, 3300,
+};
+
+static const u16 TPS65020_LDO2_VSEL_table[] = {
+	1000, 1050, 1100, 1300,
+	1800, 2500, 3000, 3300,
+};
+
+/* Supported voltage values for LDO regulators
+ * for tps65021 and tps65023 */
+static const u16 TPS65023_LDO1_VSEL_table[] = {
 	1000, 1100, 1300, 1800,
 	2200, 2600, 2800, 3150,
 };
 
-static const u16 LDO2_VSEL_table[] = {
+static const u16 TPS65023_LDO2_VSEL_table[] = {
 	1050, 1200, 1300, 1800,
 	2500, 2800, 3000, 3300,
 };
 
-static unsigned int num_voltages[] = {ARRAY_SIZE(VDCDC1_VSEL_table),
-				0, 0, ARRAY_SIZE(LDO1_VSEL_table),
-				ARRAY_SIZE(LDO2_VSEL_table)};
-
 /* Regulator specific details */
 struct tps_info {
 	const char *name;
@@ -127,6 +143,13 @@ struct tps_pmic {
 	struct regulator_dev *rdev[TPS65023_NUM_REGULATOR];
 	const struct tps_info *info[TPS65023_NUM_REGULATOR];
 	struct regmap *regmap;
+	u8 core_regulator;
+};
+
+/* Struct passed as driver data */
+struct tps_driver_data {
+	const struct tps_info *info;
+	u8 core_regulator;
 };
 
 static int tps_65023_set_bits(struct tps_pmic *tps, u8 reg, u8 mask)
@@ -253,7 +276,7 @@ static int tps65023_dcdc_get_voltage(struct regulator_dev *dev)
 	if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
 		return -EINVAL;
 
-	if (dcdc == TPS65023_DCDC_1) {
+	if (dcdc == tps->core_regulator) {
 		data = tps_65023_reg_read(tps, TPS65023_REG_DEF_CORE);
 		if (data < 0)
 			return data;
@@ -270,10 +293,10 @@ static int tps65023_dcdc_set_voltage(struct regulator_dev *dev,
 	struct tps_pmic *tps = rdev_get_drvdata(dev);
 	int dcdc = rdev_get_id(dev);
 	int vsel;
+	int ret;
 
-	if (dcdc != TPS65023_DCDC_1)
+	if (dcdc != tps->core_regulator)
 		return -EINVAL;
-
 	if (min_uV < tps->info[dcdc]->min_uV
 			|| min_uV > tps->info[dcdc]->max_uV)
 		return -EINVAL;
@@ -292,11 +315,21 @@ static int tps65023_dcdc_set_voltage(struct regulator_dev *dev,
 
 	*selector = vsel;
 
-	/* write to the register in case we found a match */
 	if (vsel == tps->info[dcdc]->table_len)
-		return -EINVAL;
-	else
-		return tps_65023_reg_write(tps, TPS65023_REG_DEF_CORE, vsel);
+		goto failed;
+
+	ret = tps_65023_reg_write(tps, TPS65023_REG_DEF_CORE, vsel);
+
+	/* Tell the chip that we have changed the value in DEFCORE
+	 * and its time to update the core voltage
+	 */
+	tps_65023_set_bits(tps, TPS65023_REG_CON_CTRL2,
+						TPS65023_REG_CTRL2_GO);
+
+	return ret;
+
+failed:
+	return -EINVAL;
 }
 
 static int tps65023_ldo_get_voltage(struct regulator_dev *dev)
@@ -362,7 +395,7 @@ static int tps65023_dcdc_list_voltage(struct regulator_dev *dev,
 	if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
 		return -EINVAL;
 
-	if (dcdc == TPS65023_DCDC_1) {
+	if (dcdc == tps->core_regulator) {
 		if (selector >= tps->info[dcdc]->table_len)
 			return -EINVAL;
 		else
@@ -414,7 +447,8 @@ static struct regmap_config tps65023_regmap_config = {
 static int __devinit tps_65023_probe(struct i2c_client *client,
 				     const struct i2c_device_id *id)
 {
-	const struct tps_info *info = (void *)id->driver_data;
+	const struct tps_driver_data *drv_data = (void *)id->driver_data;
+	const struct tps_info *info = drv_data->info;
 	struct regulator_init_data *init_data;
 	struct regulator_dev *rdev;
 	struct tps_pmic *tps;
@@ -446,6 +480,7 @@ static int __devinit tps_65023_probe(struct i2c_client *client,
 
 	/* common for all regulators */
 	tps->client = client;
+	tps->core_regulator = drv_data->core_regulator;
 
 	for (i = 0; i < TPS65023_NUM_REGULATOR; i++, info++, init_data++) {
 		/* Store regulator specific information */
@@ -453,7 +488,7 @@ static int __devinit tps_65023_probe(struct i2c_client *client,
 
 		tps->desc[i].name = info->name;
 		tps->desc[i].id = i;
-		tps->desc[i].n_voltages = num_voltages[i];
+		tps->desc[i].n_voltages = info->table_len;
 		tps->desc[i].ops = (i > TPS65023_DCDC_3 ?
 					&tps65023_ldo_ops : &tps65023_dcdc_ops);
 		tps->desc[i].type = REGULATOR_VOLTAGE;
@@ -475,6 +510,14 @@ static int __devinit tps_65023_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, tps);
 
+	/* Enable setting output voltage by I2C */
+	tps_65023_clear_bits(tps, TPS65023_REG_CON_CTRL2,
+						TPS65023_REG_CTRL2_CORE_ADJ);
+
+	/* Enable setting output voltage by I2C */
+	tps_65023_clear_bits(tps, TPS65023_REG_CON_CTRL2,
+						TPS65023_REG_CTRL2_CORE_ADJ);
+
 	return 0;
 
  fail:
@@ -507,13 +550,86 @@ static int __devexit tps_65023_remove(struct i2c_client *client)
 	return 0;
 }
 
+static const struct tps_info tps65020_regs[] = {
+	{
+		.name = "VDCDC1",
+		.min_uV = 3300000,
+		.max_uV = 3300000,
+		.fixed	= 1,
+	},
+	{
+		.name = "VDCDC2",
+		.min_uV =  1800000,
+		.max_uV = 1800000,
+		.fixed = 1,
+	},
+	{
+		.name = "VDCDC3",
+		.min_uV =  800000,
+		.max_uV = 1600000,
+		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
+		.table = VCORE_VSEL_table,
+	},
+
+	{
+		.name = "LDO1",
+		.min_uV = 1000000,
+		.max_uV = 3150000,
+		.table_len = ARRAY_SIZE(TPS65020_LDO1_VSEL_table),
+		.table = TPS65020_LDO1_VSEL_table,
+	},
+	{
+		.name = "LDO2",
+		.min_uV = 1050000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(TPS65020_LDO2_VSEL_table),
+		.table = TPS65020_LDO2_VSEL_table,
+	},
+};
+
+static const struct tps_info tps65021_regs[] = {
+	{
+		.name = "VDCDC1",
+		.min_uV =  3300000,
+		.max_uV = 3300000,
+		.fixed = 1,
+	},
+	{
+		.name = "VDCDC2",
+		.min_uV =  1800000,
+		.max_uV = 1800000,
+		.fixed = 1,
+	},
+	{
+		.name = "VDCDC3",
+		.min_uV =  800000,
+		.max_uV = 1600000,
+		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
+		.table = VCORE_VSEL_table,
+	},
+	{
+		.name = "LDO1",
+		.min_uV = 1000000,
+		.max_uV = 3150000,
+		.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
+		.table = TPS65023_LDO1_VSEL_table,
+	},
+	{
+		.name = "LDO2",
+		.min_uV = 1050000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
+		.table = TPS65023_LDO2_VSEL_table,
+	},
+};
+
 static const struct tps_info tps65023_regs[] = {
 	{
 		.name = "VDCDC1",
 		.min_uV =  800000,
 		.max_uV = 1600000,
-		.table_len = ARRAY_SIZE(VDCDC1_VSEL_table),
-		.table = VDCDC1_VSEL_table,
+		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
+		.table = VCORE_VSEL_table,
 	},
 	{
 		.name = "VDCDC2",
@@ -531,23 +647,40 @@ static const struct tps_info tps65023_regs[] = {
 		.name = "LDO1",
 		.min_uV = 1000000,
 		.max_uV = 3150000,
-		.table_len = ARRAY_SIZE(LDO1_VSEL_table),
-		.table = LDO1_VSEL_table,
+		.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
+		.table = TPS65023_LDO1_VSEL_table,
 	},
 	{
 		.name = "LDO2",
 		.min_uV = 1050000,
 		.max_uV = 3300000,
-		.table_len = ARRAY_SIZE(LDO2_VSEL_table),
-		.table = LDO2_VSEL_table,
+		.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
+		.table = TPS65023_LDO2_VSEL_table,
 	},
 };
 
+static struct tps_driver_data tps65020_drv_data = {
+	.info = tps65020_regs,
+	.core_regulator = TPS65023_DCDC_3,
+};
+
+static struct tps_driver_data tps65021_drv_data = {
+		.info = tps65021_regs,
+		.core_regulator = TPS65023_DCDC_3,
+};
+
+static struct tps_driver_data tps65023_drv_data = {
+		.info = tps65023_regs,
+		.core_regulator = TPS65023_DCDC_1,
+};
+
 static const struct i2c_device_id tps_65023_id[] = {
 	{.name = "tps65023",
-	.driver_data = (unsigned long) tps65023_regs,},
+	.driver_data = (unsigned long) &tps65023_drv_data},
 	{.name = "tps65021",
-	.driver_data = (unsigned long) tps65023_regs,},
+	.driver_data = (unsigned long) &tps65021_drv_data,},
+	{.name = "tps65020",
+	.driver_data = (unsigned long) &tps65020_drv_data},
 	{ },
 };
 

drivers/regulator/tps6507x-regulator.c

@@ -90,12 +90,6 @@ static const u16 LDO2_VSEL_table[] = {
 	3000, 3100, 3200, 3300,
 };
 
-static unsigned int num_voltages[] = {ARRAY_SIZE(VDCDCx_VSEL_table),
-				ARRAY_SIZE(VDCDCx_VSEL_table),
-				ARRAY_SIZE(VDCDCx_VSEL_table),
-				ARRAY_SIZE(LDO1_VSEL_table),
-				ARRAY_SIZE(LDO2_VSEL_table)};
-
 struct tps_info {
 	const char *name;
 	unsigned min_uV;
@@ -598,7 +592,7 @@ int tps6507x_pmic_probe(struct platform_device *pdev)
 
 		tps->desc[i].name = info->name;
 		tps->desc[i].id = i;
-		tps->desc[i].n_voltages = num_voltages[i];
+		tps->desc[i].n_voltages = info->table_len;
 		tps->desc[i].ops = (i > TPS6507X_DCDC_3 ?
 		&tps6507x_pmic_ldo_ops : &tps6507x_pmic_dcdc_ops);
 		tps->desc[i].type = REGULATOR_VOLTAGE;

drivers/regulator/tps6586x-regulator.c

@@ -332,6 +332,36 @@ static inline int tps6586x_regulator_preinit(struct device *parent,
 				 1 << ri->enable_bit[1]);
 }
 
+static int tps6586x_regulator_set_slew_rate(struct platform_device *pdev)
+{
+	struct device *parent = pdev->dev.parent;
+	struct regulator_init_data *p = pdev->dev.platform_data;
+	struct tps6586x_settings *setting = p->driver_data;
+	uint8_t reg;
+
+	if (setting == NULL)
+		return 0;
+
+	if (!(setting->slew_rate & TPS6586X_SLEW_RATE_SET))
+		return 0;
+
+	/* only SM0 and SM1 can have the slew rate settings */
+	switch (pdev->id) {
+	case TPS6586X_ID_SM_0:
+		reg = TPS6586X_SM0SL;
+		break;
+	case TPS6586X_ID_SM_1:
+		reg = TPS6586X_SM1SL;
+		break;
+	default:
+		dev_warn(&pdev->dev, "Only SM0/SM1 can set slew rate\n");
+		return -EINVAL;
+	}
+
+	return tps6586x_write(parent, reg,
+			setting->slew_rate & TPS6586X_SLEW_RATE_MASK);
+}
+
 static inline struct tps6586x_regulator *find_regulator_info(int id)
 {
 	struct tps6586x_regulator *ri;
@@ -374,7 +404,7 @@ static int __devinit tps6586x_regulator_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, rdev);
 
-	return 0;
+	return tps6586x_regulator_set_slew_rate(pdev);
 }
 
 static int __devexit tps6586x_regulator_remove(struct platform_device *pdev)

drivers/regulator/tps65912-regulator.c

@@ -43,8 +43,6 @@
 #define TPS65912_REG_LDO9	12
 #define TPS65912_REG_LDO10	13
 
-#define TPS65912_MAX_REG_ID	TPS65912_REG_LDO_10
-
 /* Number of step-down converters available */
 #define TPS65912_NUM_DCDC	4
 

include/linux/mfd/tps6586x.h

 #ifndef __LINUX_MFD_TPS6586X_H
 #define __LINUX_MFD_TPS6586X_H
 
+#define TPS6586X_SLEW_RATE_INSTANTLY	0x00
+#define TPS6586X_SLEW_RATE_110UV	0x01
+#define TPS6586X_SLEW_RATE_220UV	0x02
+#define TPS6586X_SLEW_RATE_440UV	0x03
+#define TPS6586X_SLEW_RATE_880UV	0x04
+#define TPS6586X_SLEW_RATE_1760UV	0x05
+#define TPS6586X_SLEW_RATE_3520UV	0x06
+#define TPS6586X_SLEW_RATE_7040UV	0x07
+
+#define TPS6586X_SLEW_RATE_SET		0x08
+#define TPS6586X_SLEW_RATE_MASK         0x07
+
 enum {
 	TPS6586X_ID_SM_0,
 	TPS6586X_ID_SM_1,
@@ -48,6 +60,10 @@ enum {
 	TPS6586X_INT_RTC_ALM2,
 };
 
+struct tps6586x_settings {
+	int slew_rate;
+};
+
 struct tps6586x_subdev_info {
 	int		id;
 	const char	*name;

include/linux/regulator/gpio-regulator.h

+/*
+ * gpio-regulator.h
+ *
+ * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on fixed.h
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __REGULATOR_GPIO_H
+#define __REGULATOR_GPIO_H
+
+struct regulator_init_data;
+
+enum regulator_type;
+
+/**
+ * struct gpio_regulator_state - state description
+ * @value:		microvolts or microamps
+ * @gpios:		bitfield of gpio target-states for the value
+ *
+ * This structure describes a supported setting of the regulator
+ * and the necessary gpio-state to achieve it.
+ *
+ * The n-th bit in the bitfield describes the state of the n-th GPIO
+ * from the gpios-array defined in gpio_regulator_config below.
+ */
+struct gpio_regulator_state {
+	int value;
+	int gpios;
+};
+
+/**
+ * struct gpio_regulator_config - config structure
+ * @supply_name:	Name of the regulator supply
+ * @enable_gpio:	GPIO to use for enable control
+ *			set to -EINVAL if not used
+ * @enable_high:	Polarity of enable GPIO
+ *			1 = Active high, 0 = Active low
+ * @enabled_at_boot:	Whether regulator has been enabled at
+ *			boot or not. 1 = Yes, 0 = No
+ *			This is used to keep the regulator at
+ *			the default state
+ * @startup_delay:	Start-up time in microseconds
+ * @gpios:		Array containing the gpios needed to control
+ *			the setting of the regulator
+ * @nr_gpios:		Number of gpios
+ * @states:		Array of gpio_regulator_state entries describing
+ *			the gpio state for specific voltages
+ * @nr_states:		Number of states available
+ * @regulator_type:	either REGULATOR_CURRENT or REGULATOR_VOLTAGE
+ * @init_data:		regulator_init_data
+ *
+ * This structure contains gpio-voltage regulator configuration
+ * information that must be passed by platform code to the
+ * gpio-voltage regulator driver.
+ */
+struct gpio_regulator_config {
+	const char *supply_name;
+
+	int enable_gpio;
+	unsigned enable_high:1;
+	unsigned enabled_at_boot:1;
+	unsigned startup_delay;
+
+	struct gpio *gpios;
+	int nr_gpios;
+
+	struct gpio_regulator_state *states;
+	int nr_states;
+
+	enum regulator_type type;
+	struct regulator_init_data *init_data;
+};
+
+#endif

include/linux/regulator/machine.h

@@ -95,7 +95,7 @@ struct regulator_state {
  */
 struct regulation_constraints {
 
-	char *name;
+	const char *name;
 
 	/* voltage output range (inclusive) - for voltage control */
 	int min_uV;