提交 f36e58e5 编写于 作者: H Hariprasad Shenai 提交者: David S. Miller

cxgb4: Try and provide an RDMA CIQ per cpu

To allow for better scalability on systems with large core counts, we
will try and allocate enough RDMA Concentrator IQs and MSI/X vectors as
we have cores. If we cannot get enough MSI/X vectors, fall back to the
minimum required: 1 per adapter rx channel.

Also clean up cxgb_enable_msix() to make it readable and correct a bug
where the vectors are not correctly assigned if the driver doesn't get
the full amount requested.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 1c6a5b0e
......@@ -369,7 +369,7 @@ enum {
MAX_OFLD_QSETS = 16, /* # of offload Tx/Rx queue sets */
MAX_CTRL_QUEUES = NCHAN, /* # of control Tx queues */
MAX_RDMA_QUEUES = NCHAN, /* # of streaming RDMA Rx queues */
MAX_RDMA_CIQS = NCHAN, /* # of RDMA concentrator IQs */
MAX_RDMA_CIQS = 32, /* # of RDMA concentrator IQs */
MAX_ISCSI_QUEUES = NCHAN, /* # of streaming iSCSI Rx queues */
};
......@@ -599,8 +599,8 @@ struct sge {
u16 rdmaqs; /* # of available RDMA Rx queues */
u16 rdmaciqs; /* # of available RDMA concentrator IQs */
u16 ofld_rxq[MAX_OFLD_QSETS];
u16 rdma_rxq[NCHAN];
u16 rdma_ciq[NCHAN];
u16 rdma_rxq[MAX_RDMA_QUEUES];
u16 rdma_ciq[MAX_RDMA_CIQS];
u16 timer_val[SGE_NTIMERS];
u8 counter_val[SGE_NCOUNTERS];
u32 fl_pg_order; /* large page allocation size */
......
......@@ -1769,6 +1769,8 @@ do { \
int n = min(4, adap->sge.rdmaqs - 4 * rdma_idx);
S("QType:", "RDMA-CPL");
S("Interface:",
rx[i].rspq.netdev ? rx[i].rspq.netdev->name : "N/A");
R("RspQ ID:", rspq.abs_id);
R("RspQ size:", rspq.size);
R("RspQE size:", rspq.iqe_len);
......@@ -1788,6 +1790,8 @@ do { \
int n = min(4, adap->sge.rdmaciqs - 4 * ciq_idx);
S("QType:", "RDMA-CIQ");
S("Interface:",
rx[i].rspq.netdev ? rx[i].rspq.netdev->name : "N/A");
R("RspQ ID:", rspq.abs_id);
R("RspQ size:", rspq.size);
R("RspQE size:", rspq.iqe_len);
......
......@@ -1057,7 +1057,8 @@ freeout: t4_free_sge_resources(adap);
ALLOC_OFLD_RXQS(s->ofldrxq, s->ofldqsets, j, s->ofld_rxq);
ALLOC_OFLD_RXQS(s->rdmarxq, s->rdmaqs, 1, s->rdma_rxq);
ALLOC_OFLD_RXQS(s->rdmaciq, s->rdmaciqs, 1, s->rdma_ciq);
j = s->rdmaciqs / adap->params.nports; /* rdmaq queues per channel */
ALLOC_OFLD_RXQS(s->rdmaciq, s->rdmaciqs, j, s->rdma_ciq);
#undef ALLOC_OFLD_RXQS
......@@ -5702,7 +5703,16 @@ static void cfg_queues(struct adapter *adap)
s->ofldqsets = adap->params.nports;
/* For RDMA one Rx queue per channel suffices */
s->rdmaqs = adap->params.nports;
s->rdmaciqs = adap->params.nports;
/* Try and allow at least 1 CIQ per cpu rounding down
* to the number of ports, with a minimum of 1 per port.
* A 2 port card in a 6 cpu system: 6 CIQs, 3 / port.
* A 4 port card in a 6 cpu system: 4 CIQs, 1 / port.
* A 4 port card in a 2 cpu system: 4 CIQs, 1 / port.
*/
s->rdmaciqs = min_t(int, MAX_RDMA_CIQS, num_online_cpus());
s->rdmaciqs = (s->rdmaciqs / adap->params.nports) *
adap->params.nports;
s->rdmaciqs = max_t(int, s->rdmaciqs, adap->params.nports);
}
for (i = 0; i < ARRAY_SIZE(s->ethrxq); i++) {
......@@ -5788,12 +5798,17 @@ static void reduce_ethqs(struct adapter *adap, int n)
static int enable_msix(struct adapter *adap)
{
int ofld_need = 0;
int i, want, need;
int i, want, need, allocated;
struct sge *s = &adap->sge;
unsigned int nchan = adap->params.nports;
struct msix_entry entries[MAX_INGQ + 1];
struct msix_entry *entries;
entries = kmalloc(sizeof(*entries) * (MAX_INGQ + 1),
GFP_KERNEL);
if (!entries)
return -ENOMEM;
for (i = 0; i < ARRAY_SIZE(entries); ++i)
for (i = 0; i < MAX_INGQ + 1; ++i)
entries[i].entry = i;
want = s->max_ethqsets + EXTRA_VECS;
......@@ -5810,29 +5825,39 @@ static int enable_msix(struct adapter *adap)
#else
need = adap->params.nports + EXTRA_VECS + ofld_need;
#endif
want = pci_enable_msix_range(adap->pdev, entries, need, want);
if (want < 0)
return want;
allocated = pci_enable_msix_range(adap->pdev, entries, need, want);
if (allocated < 0) {
dev_info(adap->pdev_dev, "not enough MSI-X vectors left,"
" not using MSI-X\n");
kfree(entries);
return allocated;
}
/*
* Distribute available vectors to the various queue groups.
/* Distribute available vectors to the various queue groups.
* Every group gets its minimum requirement and NIC gets top
* priority for leftovers.
*/
i = want - EXTRA_VECS - ofld_need;
i = allocated - EXTRA_VECS - ofld_need;
if (i < s->max_ethqsets) {
s->max_ethqsets = i;
if (i < s->ethqsets)
reduce_ethqs(adap, i);
}
if (is_offload(adap)) {
i = want - EXTRA_VECS - s->max_ethqsets;
i -= ofld_need - nchan;
if (allocated < want) {
s->rdmaqs = nchan;
s->rdmaciqs = nchan;
}
/* leftovers go to OFLD */
i = allocated - EXTRA_VECS - s->max_ethqsets -
s->rdmaqs - s->rdmaciqs;
s->ofldqsets = (i / nchan) * nchan; /* round down */
}
for (i = 0; i < want; ++i)
for (i = 0; i < allocated; ++i)
adap->msix_info[i].vec = entries[i].vector;
kfree(entries);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册