提交 f32bfb9a 编写于 作者: S Sergei Shtylyov 提交者: David S. Miller

sh_eth: use DMA barriers

Commit  7d7355f5 ("sh_eth: Ensure proper ordering of descriptor active
bit write/read") did the right thing  but used too "heavy" barriers while
there were already "lighter" DMA barriers exactly  for this case...
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 73186df8
......@@ -1416,7 +1416,7 @@ static int sh_eth_txfree(struct net_device *ndev)
if (txdesc->status & cpu_to_edmac(mdp, TD_TACT))
break;
/* TACT bit must be checked before all the following reads */
rmb();
dma_rmb();
netif_info(mdp, tx_done, ndev,
"tx entry %d status 0x%08x\n",
entry, edmac_to_cpu(mdp, txdesc->status));
......@@ -1458,7 +1458,7 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
rxdesc = &mdp->rx_ring[entry];
while (!(rxdesc->status & cpu_to_edmac(mdp, RD_RACT))) {
/* RACT bit must be checked before all the following reads */
rmb();
dma_rmb();
desc_status = edmac_to_cpu(mdp, rxdesc->status);
pkt_len = rxdesc->frame_length;
......@@ -1544,7 +1544,7 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
skb_checksum_none_assert(skb);
rxdesc->addr = dma_addr;
}
wmb(); /* RACT bit must be set after all the above writes */
dma_wmb(); /* RACT bit must be set after all the above writes */
if (entry >= mdp->num_rx_ring - 1)
rxdesc->status |=
cpu_to_edmac(mdp, RD_RACT | RD_RFP | RD_RDLE);
......@@ -2403,7 +2403,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
}
txdesc->buffer_length = skb->len;
wmb(); /* TACT bit must be set after all the above writes */
dma_wmb(); /* TACT bit must be set after all the above writes */
if (entry >= mdp->num_tx_ring - 1)
txdesc->status |= cpu_to_edmac(mdp, TD_TACT | TD_TDLE);
else
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册