提交 f2e795ff 编写于 作者: M Mike McCormack 提交者: John W. Linville

rtlwifi: rtl8192{ce,cu,se} Remove irq_enabled

This should be unnecessary if synchronize_irq is used.
Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 80b69593
......@@ -788,15 +788,11 @@ static irqreturn_t _rtl_pci_interrupt(int irq, void *dev_id)
{
struct ieee80211_hw *hw = dev_id;
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
unsigned long flags;
u32 inta = 0;
u32 intb = 0;
if (rtlpci->irq_enabled == 0)
return IRQ_HANDLED;
spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
/*read ISR: 4/8bytes */
......
......@@ -158,7 +158,6 @@ struct rtl_pci {
bool first_init;
bool being_init_adapter;
bool init_ready;
bool irq_enabled;
/*Tx */
struct rtl8192_tx_ring tx_ring[RTL_PCI_MAX_TX_QUEUE_COUNT];
......
......@@ -1183,7 +1183,6 @@ void rtl92ce_enable_interrupt(struct ieee80211_hw *hw)
rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
rtlpci->irq_enabled = true;
}
void rtl92ce_disable_interrupt(struct ieee80211_hw *hw)
......@@ -1193,7 +1192,6 @@ void rtl92ce_disable_interrupt(struct ieee80211_hw *hw)
rtl_write_dword(rtlpriv, REG_HIMR, IMR8190_DISABLED);
rtl_write_dword(rtlpriv, REG_HIMRE, IMR8190_DISABLED);
rtlpci->irq_enabled = false;
synchronize_irq(rtlpci->pdev->irq);
}
......
......@@ -380,13 +380,11 @@ void rtl92c_enable_interrupt(struct ieee80211_hw *hw)
0xFFFFFFFF);
rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] &
0xFFFFFFFF);
rtlpci->irq_enabled = true;
} else {
rtl_write_dword(rtlpriv, REG_HIMR, rtlusb->irq_mask[0] &
0xFFFFFFFF);
rtl_write_dword(rtlpriv, REG_HIMRE, rtlusb->irq_mask[1] &
0xFFFFFFFF);
rtlusb->irq_enabled = true;
}
}
......@@ -398,16 +396,9 @@ void rtl92c_init_interrupt(struct ieee80211_hw *hw)
void rtl92c_disable_interrupt(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
rtl_write_dword(rtlpriv, REG_HIMR, IMR8190_DISABLED);
rtl_write_dword(rtlpriv, REG_HIMRE, IMR8190_DISABLED);
if (IS_HARDWARE_TYPE_8192CE(rtlhal))
rtlpci->irq_enabled = false;
else if (IS_HARDWARE_TYPE_8192CU(rtlhal))
rtlusb->irq_enabled = false;
}
void rtl92c_set_qos(struct ieee80211_hw *hw, int aci)
......
......@@ -1214,8 +1214,6 @@ void rtl92se_enable_interrupt(struct ieee80211_hw *hw)
rtl_write_dword(rtlpriv, INTA_MASK, rtlpci->irq_mask[0]);
/* Support Bit 32-37(Assign as Bit 0-5) interrupt setting now */
rtl_write_dword(rtlpriv, INTA_MASK + 4, rtlpci->irq_mask[1] & 0x3F);
rtlpci->irq_enabled = true;
}
void rtl92se_disable_interrupt(struct ieee80211_hw *hw)
......@@ -1226,7 +1224,6 @@ void rtl92se_disable_interrupt(struct ieee80211_hw *hw)
rtl_write_dword(rtlpriv, INTA_MASK, 0);
rtl_write_dword(rtlpriv, INTA_MASK + 4, 0);
rtlpci->irq_enabled = false;
synchronize_irq(rtlpci->pdev->irq);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册