IB/ipath: Make some constants chip-specific, related cleanup

This patch makes some constants chip-specific, and makes some related
changes to prepare for supporting another HCA.

Signed-off-by: Dave Olson <dave.olson@qlogic.com
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

drivers/infiniband/hw/ipath/ipath_iba6110.c

@@ -40,6 +40,7 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/htirq.h>
+#include <rdma/ib_verbs.h>
 
 #include "ipath_kernel.h"
 #include "ipath_registers.h"
@@ -476,7 +477,13 @@ static const struct ipath_hwerror_msgs ipath_6110_hwerror_msgs[] = {
 #define RXE_EAGER_PARITY (INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID \
 			  << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)
 
-static int ipath_ht_txe_recover(struct ipath_devdata *);
+static void ipath_ht_txe_recover(struct ipath_devdata *dd)
+{
+	++ipath_stats.sps_txeparity;
+	dev_info(&dd->pcidev->dev,
+		"Recovering from TXE PIO parity error\n");
+}
+
 
 /**
  * ipath_ht_handle_hwerrors - display hardware errors.
@@ -557,11 +564,11 @@ static void ipath_ht_handle_hwerrors(struct ipath_devdata *dd, char *msg,
 		 * occur if a processor speculative read is done to the PIO
 		 * buffer while we are sending a packet, for example.
 		 */
-		if ((hwerrs & TXE_PIO_PARITY) && ipath_ht_txe_recover(dd))
+		if (hwerrs & TXE_PIO_PARITY) {
+			ipath_ht_txe_recover(dd);
 			hwerrs &= ~TXE_PIO_PARITY;
-		if (hwerrs & RXE_EAGER_PARITY)
-			ipath_dev_err(dd, "RXE parity, Eager TID error is not "
-				"recoverable\n");
+		}
+
 		if (!hwerrs) {
 			ipath_dbg("Clearing freezemode on ignored or "
 				  "recovered hardware error\n");
@@ -1653,22 +1660,6 @@ static int ipath_ht_early_init(struct ipath_devdata *dd)
 }
 
 
-static int ipath_ht_txe_recover(struct ipath_devdata *dd)
-{
-	int cnt = ++ipath_stats.sps_txeparity;
-	if (cnt >= IPATH_MAX_PARITY_ATTEMPTS)  {
-		if (cnt == IPATH_MAX_PARITY_ATTEMPTS)
-			ipath_dev_err(dd,
-				"Too many attempts to recover from "
-				"TXE parity, giving up\n");
-		return 0;
-	}
-	dev_info(&dd->pcidev->dev,
-		"Recovering from TXE PIO parity error\n");
-	return 1;
-}
-
-
 /**
  * ipath_init_ht_get_base_info - set chip-specific flags for user code
  * @dd: the infinipath device

drivers/infiniband/hw/ipath/ipath_iba6120.c

@@ -38,7 +38,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
-
+#include <rdma/ib_verbs.h>
 
 #include "ipath_kernel.h"
 #include "ipath_registers.h"
@@ -311,6 +311,9 @@ static const struct ipath_cregs ipath_pe_cregs = {
 	.cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt)
 };
 
+/* kr_control bits */
+#define INFINIPATH_C_RESET 1U
+
 /* kr_intstatus, kr_intclear, kr_intmask bits */
 #define INFINIPATH_I_RCVURG_MASK ((1U<<5)-1)
 #define INFINIPATH_I_RCVAVAIL_MASK ((1U<<5)-1)
@@ -338,6 +341,9 @@ static const struct ipath_cregs ipath_pe_cregs = {
 #define INFINIPATH_EXTS_MEMBIST_ENDTEST     0x0000000000004000
 #define INFINIPATH_EXTS_MEMBIST_FOUND       0x0000000000008000
 
+/* kr_xgxsconfig bits */
+#define INFINIPATH_XGXS_RESET          0x5ULL
+
 #define _IPATH_GPIO_SDA_NUM 1
 #define _IPATH_GPIO_SCL_NUM 0
 
@@ -346,6 +352,16 @@ static const struct ipath_cregs ipath_pe_cregs = {
 #define IPATH_GPIO_SCL (1ULL << \
 	(_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
 
+#define INFINIPATH_RT_BUFSIZE_MASK 0xe0000000ULL
+#define INFINIPATH_RT_BUFSIZE_SHIFTVAL(tid) \
+	((((tid) & INFINIPATH_RT_BUFSIZE_MASK) >> 29) + 11 - 1)
+#define INFINIPATH_RT_BUFSIZE(tid) (1 << INFINIPATH_RT_BUFSIZE_SHIFTVAL(tid))
+#define INFINIPATH_RT_IS_VALID(tid) \
+	(((tid) & INFINIPATH_RT_BUFSIZE_MASK) && \
+	 ((((tid) & INFINIPATH_RT_BUFSIZE_MASK) != INFINIPATH_RT_BUFSIZE_MASK)))
+#define INFINIPATH_RT_ADDR_MASK 0x1FFFFFFFULL /* 29 bits valid */
+#define INFINIPATH_RT_ADDR_SHIFT 10
+
 #define INFINIPATH_R_INTRAVAIL_SHIFT 16
 #define INFINIPATH_R_TAILUPD_SHIFT 31
 
@@ -372,6 +388,8 @@ static const struct ipath_hwerror_msgs ipath_6120_hwerror_msgs[] = {
 #define TXE_PIO_PARITY ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | \
 		        INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \
 		        << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)
+#define RXE_EAGER_PARITY (INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID \
+			  << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)
 
 static void ipath_pe_put_tid_2(struct ipath_devdata *, u64 __iomem *,
 			       u32, unsigned long);
@@ -450,10 +468,8 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg,
 	 * make sure we get this much out, unless told to be quiet,
 	 * or it's occurred within the last 5 seconds
 	 */
-	if ((hwerrs & ~(dd->ipath_lasthwerror |
-			((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
-			  INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
-			 << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT))) ||
+	if ((hwerrs & ~(dd->ipath_lasthwerror | TXE_PIO_PARITY |
+			RXE_EAGER_PARITY)) ||
 	    (ipath_debug & __IPATH_VERBDBG))
 		dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
 			 "(cleared)\n", (unsigned long long) hwerrs);
@@ -1218,7 +1234,7 @@ static void ipath_pe_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr,
 		}
 		pa >>= 11;
 		/* paranoia check */
-		if (pa & (7<<29))
+		if (pa & ~INFINIPATH_RT_ADDR_MASK)
 			ipath_dev_err(dd,
 				      "BUG: Physical page address 0x%lx "
 				      "has bits set in 31-29\n", pa);
@@ -1270,7 +1286,7 @@ static void ipath_pe_put_tid_2(struct ipath_devdata *dd, u64 __iomem *tidptr,
 		}
 		pa >>= 11;
 		/* paranoia check */
-		if (pa & (7<<29))
+		if (pa & ~INFINIPATH_RT_ADDR_MASK)
 			ipath_dev_err(dd,
 				      "BUG: Physical page address 0x%lx "
 				      "has bits set in 31-29\n", pa);

drivers/infiniband/hw/ipath/ipath_registers.h

@@ -63,7 +63,6 @@
 /* kr_control bits */
 #define INFINIPATH_C_FREEZEMODE 0x00000002
 #define INFINIPATH_C_LINKENABLE 0x00000004
-#define INFINIPATH_C_RESET 0x00000001
 
 /* kr_sendctrl bits */
 #define INFINIPATH_S_DISARMPIOBUF_SHIFT 16
@@ -287,7 +286,6 @@
 #define INFINIPATH_SERDC0_L1PWR_DN	 0xF0ULL
 
 /* kr_xgxsconfig bits */
-#define INFINIPATH_XGXS_RESET          0x7ULL
 #define INFINIPATH_XGXS_RX_POL_SHIFT 19
 #define INFINIPATH_XGXS_RX_POL_MASK 0xfULL