提交 f29f5c08 编写于 作者: R Rajkumar Manoharan 提交者: John W. Linville

ath9k: Remove ATH9K_BEACON_PERIOD mask

Earlier beacon_interval is used to hold interval value and
some flags (ATH9K_BEACON_ENA &ATH9K_BEACON_PERIOD). So to
extract interval ATH9K_BEACON_PERIOD is used. Those flags
were completely removed. So masking beacon_interval is
not required.
Signed-off-by: NRajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 9d75ef0f
......@@ -496,7 +496,7 @@ static void ath_beacon_config_ap(struct ath_softc *sc,
u32 nexttbtt, intval;
/* NB: the beacon interval is kept internally in TU's */
intval = TU_TO_USEC(conf->beacon_interval & ATH9K_BEACON_PERIOD);
intval = TU_TO_USEC(conf->beacon_interval);
intval /= ATH_BCBUF; /* for staggered beacons */
nexttbtt = intval;
......@@ -543,7 +543,7 @@ static void ath_beacon_config_sta(struct ath_softc *sc,
}
memset(&bs, 0, sizeof(bs));
intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
intval = conf->beacon_interval;
/*
* Setup dtim and cfp parameters according to
......@@ -657,7 +657,7 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
ath9k_reset_beacon_status(sc);
tsf = ath9k_hw_gettsf32(ah) + TU_TO_USEC(FUDGE);
intval = TU_TO_USEC(conf->beacon_interval & ATH9K_BEACON_PERIOD);
intval = TU_TO_USEC(conf->beacon_interval);
if (!sc->beacon.bc_tstamp)
nexttbtt = tsf + intval;
......
......@@ -79,7 +79,7 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
memset(&bs, 0, sizeof(bs));
intval = bss_conf->beacon_interval & ATH9K_BEACON_PERIOD;
intval = bss_conf->beacon_interval;
bmiss_timeout = (ATH_DEFAULT_BMISS_LIMIT * bss_conf->beacon_interval);
/*
......@@ -194,7 +194,7 @@ static void ath9k_htc_beacon_config_ap(struct ath9k_htc_priv *priv,
u8 cmd_rsp;
u64 tsf;
intval = bss_conf->beacon_interval & ATH9K_BEACON_PERIOD;
intval = bss_conf->beacon_interval;
intval /= ATH9K_HTC_MAX_BCN_VIF;
nexttbtt = intval;
......@@ -250,7 +250,7 @@ static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
u8 cmd_rsp;
u64 tsf;
intval = bss_conf->beacon_interval & ATH9K_BEACON_PERIOD;
intval = bss_conf->beacon_interval;
nexttbtt = intval;
/*
......@@ -427,7 +427,7 @@ static int ath9k_htc_choose_bslot(struct ath9k_htc_priv *priv,
u16 intval;
int slot;
intval = priv->cur_beacon_conf.beacon_interval & ATH9K_BEACON_PERIOD;
intval = priv->cur_beacon_conf.beacon_interval;
tsf = be64_to_cpu(swba->tsf);
tsftu = TSF_TO_TU(tsf >> 32, tsf);
......
......@@ -1785,16 +1785,16 @@ void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(bs->bs_nexttbtt));
REG_WRITE(ah, AR_BEACON_PERIOD,
TU_TO_USEC(bs->bs_intval & ATH9K_BEACON_PERIOD));
TU_TO_USEC(bs->bs_intval));
REG_WRITE(ah, AR_DMA_BEACON_PERIOD,
TU_TO_USEC(bs->bs_intval & ATH9K_BEACON_PERIOD));
TU_TO_USEC(bs->bs_intval));
REGWRITE_BUFFER_FLUSH(ah);
REG_RMW_FIELD(ah, AR_RSSI_THR,
AR_RSSI_THR_BM_THR, bs->bs_bmissthreshold);
beaconintval = bs->bs_intval & ATH9K_BEACON_PERIOD;
beaconintval = bs->bs_intval;
if (bs->bs_sleepduration > beaconintval)
beaconintval = bs->bs_sleepduration;
......
......@@ -403,7 +403,6 @@ struct ath9k_beacon_state {
u32 bs_nexttbtt;
u32 bs_nextdtim;
u32 bs_intval;
#define ATH9K_BEACON_PERIOD 0x0000ffff
#define ATH9K_TSFOOR_THRESHOLD 0x00004240 /* 16k us */
u32 bs_dtimperiod;
u16 bs_cfpperiod;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册