Staging: comedi: Remove parentheses around right side assignment

Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurences. Issue was detected and
solved using the following coccinelle script:

@rule1@
identifier x, y, z;
expression E1, E2;
@@

(
x = (y == z);
|
x = (E1 == E2);
|
 x =
-(
...
-)
 ;
)
Signed-off-by: NHaneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/addi_apci_3501.c

@@ -270,7 +270,7 @@ static irqreturn_t apci3501_interrupt(int irq, void *d)
 
 	/*  Disable Interrupt */
 	ul_Command1 = inl(dev->iobase + APCI3501_TIMER_CTRL_REG);
-	ul_Command1 = (ul_Command1 & 0xFFFFF9FDul);
+	ul_Command1 = ul_Command1 & 0xFFFFF9FDul;
 	outl(ul_Command1, dev->iobase + APCI3501_TIMER_CTRL_REG);
 
 	ui_Timer_AOWatchdog = inl(dev->iobase + APCI3501_TIMER_IRQ_REG) & 0x1;
@@ -282,7 +282,7 @@ static irqreturn_t apci3501_interrupt(int irq, void *d)
 	/* Enable Interrupt Send a signal to from kernel to user space */
 	send_sig(SIGIO, devpriv->tsk_Current, 0);
 	ul_Command1 = inl(dev->iobase + APCI3501_TIMER_CTRL_REG);
-	ul_Command1 = ((ul_Command1 & 0xFFFFF9FDul) | 1 << 1);
+	ul_Command1 = (ul_Command1 & 0xFFFFF9FDul) | 1 << 1;
 	outl(ul_Command1, dev->iobase + APCI3501_TIMER_CTRL_REG);
 	inl(dev->iobase + APCI3501_TIMER_STATUS_REG);
 

drivers/staging/comedi/drivers/ni_mio_common.c

@@ -1360,7 +1360,7 @@ static void get_last_sample_611x(struct comedi_device *dev)
 	/* Check if there's a single sample stuck in the FIFO */
 	if (ni_readb(dev, XXX_Status) & 0x80) {
 		dl = ni_readl(dev, ADC_FIFO_Data_611x);
-		data = (dl & 0xffff);
+		data = dl & 0xffff;
 		comedi_buf_write_samples(s, &data, 1);
 	}
 }
@@ -1871,7 +1871,7 @@ static void ni_m_series_load_channelgain_list(struct comedi_device *dev,
 		chan = CR_CHAN(list[0]);
 		range = CR_RANGE(list[0]);
 		range_code = ni_gainlkup[board->gainlkup][range];
-		dither = ((list[0] & CR_ALT_FILTER) != 0);
+		dither = (list[0] & CR_ALT_FILTER) != 0;
 		bypass_bits = MSeries_AI_Bypass_Config_FIFO_Bit;
 		bypass_bits |= chan;
 		bypass_bits |=
@@ -1895,7 +1895,7 @@ static void ni_m_series_load_channelgain_list(struct comedi_device *dev,
 		chan = CR_CHAN(list[i]);
 		aref = CR_AREF(list[i]);
 		range = CR_RANGE(list[i]);
-		dither = ((list[i] & CR_ALT_FILTER) != 0);
+		dither = (list[i] & CR_ALT_FILTER) != 0;
 
 		range_code = ni_gainlkup[board->gainlkup][range];
 		devpriv->ai_offset[i] = 0;
@@ -2021,7 +2021,7 @@ static void ni_load_channelgain_list(struct comedi_device *dev,
 			chan = CR_CHAN(list[i]);
 		aref = CR_AREF(list[i]);
 		range = CR_RANGE(list[i]);
-		dither = ((list[i] & CR_ALT_FILTER) != 0);
+		dither = (list[i] & CR_ALT_FILTER) != 0;
 
 		/* fix the external/internal range differences */
 		range = ni_gainlkup[board->gainlkup][range];

drivers/staging/comedi/drivers/serial2002.c

@@ -143,8 +143,8 @@ static void serial2002_tty_read_poll_wait(struct file *f, int timeout)
 			break;
 		}
 		do_gettimeofday(&now);
-		elapsed = (1000000 * (now.tv_sec - start.tv_sec) +
-			  now.tv_usec - start.tv_usec);
+		elapsed = 1000000 * (now.tv_sec - start.tv_sec) +
+			  now.tv_usec - start.tv_usec;
 		if (elapsed > timeout)
 			break;
 		set_current_state(TASK_INTERRUPTIBLE);