提交 f0342e66 编写于 作者: M Martyn Welch 提交者: Greg Kroah-Hartman

VME: Correct read/write alignment algorithm

In order to ensure the correct width cycles on the VME bus, the VME bridge
drivers implement an algorithm to utilise the largest possible width reads and
writes whilst maintaining natural alignment constraints. The algorithm
currently looks at the start address rather than the current read/write address
when determining whether a 16-bit width cycle is required to get to 32-bit
alignment.  This results in incorrect alignment,
Reported-by: NJim Strouth <james.strouth@ge.com>
Tested-by: NJim Strouth <james.strouth@ge.com>
Signed-off-by: NMartyn Welch <martyn.welch@ge.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 5cb906c7
......@@ -884,7 +884,7 @@ static ssize_t ca91cx42_master_read(struct vme_master_resource *image,
if (done == count)
goto out;
}
if ((uintptr_t)addr & 0x2) {
if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
*(u8 *)(buf + done) = ioread8(addr + done);
done += 1;
......@@ -938,7 +938,7 @@ static ssize_t ca91cx42_master_write(struct vme_master_resource *image,
if (done == count)
goto out;
}
if ((uintptr_t)addr & 0x2) {
if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
iowrite8(*(u8 *)(buf + done), addr + done);
done += 1;
......
......@@ -1289,7 +1289,7 @@ static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf,
if (done == count)
goto out;
}
if ((uintptr_t)addr & 0x2) {
if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
*(u8 *)(buf + done) = ioread8(addr + done);
done += 1;
......@@ -1371,7 +1371,7 @@ static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf,
if (done == count)
goto out;
}
if ((uintptr_t)addr & 0x2) {
if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
iowrite8(*(u8 *)(buf + done), addr + done);
done += 1;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册