提交 f02abf10 编写于 作者: S Stephen Hemminger 提交者: David S. Miller

libertas: convert to net_device_ops

Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 bbfc6b78
......@@ -1148,6 +1148,17 @@ static void lbs_free_adapter(struct lbs_private *priv)
lbs_deb_leave(LBS_DEB_MAIN);
}
static const struct net_device_ops lbs_netdev_ops = {
.ndo_open = lbs_dev_open,
.ndo_stop = lbs_eth_stop,
.ndo_start_xmit = lbs_hard_start_xmit,
.ndo_set_mac_address = lbs_set_mac_address,
.ndo_tx_timeout = lbs_tx_timeout,
.ndo_set_multicast_list = lbs_set_multicast_list,
.ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
};
/**
* @brief This function adds the card. it will probe the
* card, allocate the lbs_priv and initialize the device.
......@@ -1182,19 +1193,13 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
priv->infra_open = 0;
/* Setup the OS Interface to our functions */
dev->open = lbs_dev_open;
dev->hard_start_xmit = lbs_hard_start_xmit;
dev->stop = lbs_eth_stop;
dev->set_mac_address = lbs_set_mac_address;
dev->tx_timeout = lbs_tx_timeout;
dev->netdev_ops = &lbs_netdev_ops;
dev->watchdog_timeo = 5 * HZ;
dev->ethtool_ops = &lbs_ethtool_ops;
#ifdef WIRELESS_EXT
dev->wireless_handlers = (struct iw_handler_def *)&lbs_handler_def;
dev->wireless_handlers = &lbs_handler_def;
#endif
dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
dev->set_multicast_list = lbs_set_multicast_list;
SET_NETDEV_DEV(dev, dmdev);
......@@ -1404,6 +1409,14 @@ void lbs_stop_card(struct lbs_private *priv)
EXPORT_SYMBOL_GPL(lbs_stop_card);
static const struct net_device_ops mesh_netdev_ops = {
.ndo_open = lbs_dev_open,
.ndo_stop = lbs_mesh_stop,
.ndo_start_xmit = lbs_hard_start_xmit,
.ndo_set_mac_address = lbs_set_mac_address,
.ndo_set_multicast_list = lbs_set_multicast_list,
};
/**
* @brief This function adds mshX interface
*
......@@ -1426,10 +1439,7 @@ static int lbs_add_mesh(struct lbs_private *priv)
mesh_dev->ml_priv = priv;
priv->mesh_dev = mesh_dev;
mesh_dev->open = lbs_dev_open;
mesh_dev->hard_start_xmit = lbs_hard_start_xmit;
mesh_dev->stop = lbs_mesh_stop;
mesh_dev->set_mac_address = lbs_set_mac_address;
mesh_dev->netdev_ops = &mesh_netdev_ops;
mesh_dev->ethtool_ops = &lbs_ethtool_ops;
memcpy(mesh_dev->dev_addr, priv->dev->dev_addr,
sizeof(priv->dev->dev_addr));
......@@ -1440,7 +1450,6 @@ static int lbs_add_mesh(struct lbs_private *priv)
mesh_dev->wireless_handlers = (struct iw_handler_def *)&mesh_handler_def;
#endif
mesh_dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
mesh_dev->set_multicast_list = lbs_set_multicast_list;
/* Register virtual mesh interface */
ret = register_netdev(mesh_dev);
if (ret) {
......@@ -1645,6 +1654,12 @@ static void lbs_remove_rtap(struct lbs_private *priv)
lbs_deb_leave(LBS_DEB_MAIN);
}
static const struct net_device_ops rtap_netdev_ops = {
.ndo_open = lbs_rtap_open,
.ndo_stop = lbs_rtap_stop,
.ndo_start_xmit = lbs_rtap_hard_start_xmit,
};
static int lbs_add_rtap(struct lbs_private *priv)
{
int ret = 0;
......@@ -1664,9 +1679,7 @@ static int lbs_add_rtap(struct lbs_private *priv)
memcpy(rtap_dev->dev_addr, priv->current_addr, ETH_ALEN);
rtap_dev->type = ARPHRD_IEEE80211_RADIOTAP;
rtap_dev->open = lbs_rtap_open;
rtap_dev->stop = lbs_rtap_stop;
rtap_dev->hard_start_xmit = lbs_rtap_hard_start_xmit;
rtap_dev->netdev_ops = &rtap_netdev_ops;
rtap_dev->ml_priv = priv;
SET_NETDEV_DEV(rtap_dev, priv->dev->dev.parent);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册